Chad! Your video just saved me hours of chasing my tail and troubleshooting my Ranger XP1000! I had this issue and I fixed it today with your solution! Thank you very much!!!!!!

@dirtpoortv4483

11 ай бұрын

Thanks for the positive feedback. I'm pleased we could help you with your issue. Thanks for watching Dirt Poor TV

I couldn't figure it out until I watched your video,,, great work

@dirtpoortv4483

Жыл бұрын

Thanks for Watching Dirt Poor Tv

DUDE !!!!! Thank you !!! son fighting to put in gear..broken shift cable..three wrong/defective new one. new cable in, adjusted repeatedly...good now still wont go into gear while running...replaced clutch..all good now it wont start...ohm meter, checkin if i knocked a wire off.. SAW this video..got in Ranger and STEPPED on brake pedal like a crazy person ...it started will fix from there just wanted to say THANK YOU FOR VID !!!

@dirtpoortv4483

2 жыл бұрын

Your welcome. Thanks for watching Dirt Poor Tv

Great video! just installed the switch with no problem at all. Thanks!!

@dirtpoortv4483

Жыл бұрын

Thanks for watching Dirt Poor Tv

Bravo, thank you, I’m so tired of punching the brake pedal. Even a girl can do this

@dirtpoortv4483

Жыл бұрын

LOL, Only cool girl can get it done on a SXS. Thanks for watching Dirt Poor Tv

very helpful. exactly what I needed.

@dirtpoortv4483

Жыл бұрын

Thanks for watching Dirt Poor Tv

Thanks boss. You're a lifesaver.

@dirtpoortv4483

Жыл бұрын

Thanks for watching Dirt Poor Tv

Very helpful. Thank you!

perfect! straight to the point, informative and answered the Subject Line! What is the best way to completely bypass this switch?

@dirtpoortv4483

2 жыл бұрын

Thanks for watching Dirt Poor Tv

Great video! I’m having the same issue on my rzr xp4 turbo. Hopefully they’ll cover this under warranty

@georgewells3898

2 жыл бұрын

Under a year its warrantied.

I didn't have to bleed the brakes after replacing the pressure switch. Thanks for watching Dirt Poor Tv

Amazing video!!! Thank you

@dirtpoortv4483

Жыл бұрын

Thanks for watching Dirt Poor Tv

Great video Sir….thank you so much, Let me ask you this if I can… My 2018 ranger 900 XP will maybe do this once maybe twice per year it seems it won’t start exactly how you showed in your video but out and roll the machine forward or reverse maybe a couple of inches, get back in the machine, put it in park step on the brake and she will start then it’ll start, however now it seems to do it much more frequently and If I try to roll it. It doesn’t work every time I roll it forward or backwards So I’m not sure if it’s the brake sensor switch or if it’s a flat spot somewhere do you talk about this in your other videos that you can direct me to? Ty Kevin

So you didn’t need to bleed after changing huh? I have an 06 500 fi and the switch is under behind SS fender in a pita location.

Thanks Gents

Thank you sir!

@dirtpoortv4483

2 жыл бұрын

Your welcome, Thanks for watching Dirt Poor Tv

Thank you for posting this video! Does anyone know if the new part fixes something? The old part had a really high fail rate.

@dirtpoortv4483

Жыл бұрын

The old part must have had a high failure rate. The new switch is a little different as you can see in the video. Thanks for watching Dirt Poor Tv.

Would the brake pressure sensor cause nothing electrical to work? No winch, light, starter or fuel pump. It was fine after the last ride then after sitting a week I couldn't get any of these.

@dirtpoortv4483

2 жыл бұрын

No, the brake switch would have nothing to do with fuel pump. These electrical issues would be from main power loss. One way to check that it is not the brake switch is to unplug the brake switch and touch both wires together. That will bypass the switch. Thanks for watching Dirt Poor Tv.

Thx , would it be similar install on a 2020 ranger 500 .. just had this today,break lights stay on trying to crank then clicks. I disconnect battery to get break lights to go off

@dirtpoortv4483

Жыл бұрын

Thanks for your comment and watching Dirt Poor Tv 👍

Would the brake switch be causing my 2020 xpt just click when I try to start but yet the battery volts show 12.4 volts but if you stick jumper cables to it it fires right up

@pamfortin2660

2 жыл бұрын

this is exactly what my 2014 Ranger 570 is doing...battery is good...if I jump it to boost it it fires. Click click click...I wonder if it's a spark plug or voltage regulator? It did it with my original battery too. New battery didn't fix it

Were the brake lights not coming on with the old /broken switch?

@dirtpoortv4483

2 жыл бұрын

That is a great question. I didn't look before I removed the BPS. But I made sure to check after I replaced the BPS. Thanks for watching Dirt Poor Tv

Would this switch cause the motor to turn over slowly/ take awhile to fire? Every once and awhile the starter just clicks too.

@dirtpoortv4483

Жыл бұрын

No, I don't think so. Just unplug the switch and make a jumper wire for the harness you just unplugged. If it starts fine, it is the switch. If it still turns over slow the switch is not your problem. Thanks for watching Dirt Poor TV

would this cause a ranger that is running to just randomly shut off?

@dirtpoortv4483

2 жыл бұрын

No it would not make it die after it is started. if you want to test it just unplug the pressure switch and make a jumper wire. Then insert it into the harness side so it will complete a circuit and the unit should start. If it dies the switch is not your problem. Make sure you tape or protect your jumper wire so it does not go to ground. Thanks for watching Dirt Poor Tv

Where is the master cylinder located? Same issue on my 2012 Ranger.

@dirtpoortv4483

2 жыл бұрын

It is located outside the vehicle on the driver side firewall by the left front tire.

@user-kw3vd4vs9y

10 ай бұрын

Where can I order this part from

I went on Polaris’s website and they said this part isn’t correct for my 2018. They say #4081117 is the right part and looks more like the OEM. 🤨

@dirtpoortv4483

11 ай бұрын

Parts and part numbers change all the time. At the time of this video these where the parts that were available. If Polaris is giving you different part numbers, then I have I would recommend using Polaris's numbers. I received this part from my local Polaris dealer, and it has work flawlessly. Thanks for Watching Dirt Poor Tv