Fuckn life saver of a video. Took it apart so long ago I had no idea what was supposed to be in thete
@mightymoe4u26 жыл бұрын
Thanks for this. I didn't realise so many parts were In there
@benwesley91896 жыл бұрын
Thanks man that video really helped me out
@mightymoe4u26 жыл бұрын
I have a role pin on the inside , that connects the shaft to the front diff
@rubendariogiagnorio76537 жыл бұрын
excelente video
@ejr41404 жыл бұрын
good video...trying to get ball joint off without taking the strut off...pain in the balls.
@scootercat33337 жыл бұрын
what do you use to clean up the 4 bearings you took out? wd40? or is that what the hub oil is for?
@damiandelapp54906 жыл бұрын
If that ain’t just the simplest dam thing.. I would think it important to not mix bearings and races, oh and keep all those parts clean off filthy pavement.. the book says fill up rotate hub to 3-4 o’clock position emptying out about 1/2 oil for refill.
@Deadbuck7311 жыл бұрын
Kinda made that look easy.
@mikelane241111 жыл бұрын
It sounds like you need to change your belt and go through your clutches I have an 800 it did the same thing very easy fix
@connorhudnall918211 жыл бұрын
yea man thank for vid
@zombieknowitall92964 жыл бұрын
How does that clutch bearing work??
@markbullard41608 ай бұрын
do you put grease on the bearings
@brandontotel34687 жыл бұрын
how did you get the whole shaft out? I had to loosen the strut tower and remove the top tie rod to get the shaft.out of the strut tower
@PHATAT0
7 жыл бұрын
on mine there's a ujoint above that is a roll pin you just punch out and it takes the axle off the diff
@timschannel9104 жыл бұрын
I have a 1999 where did you get your parts at. What year is this.
@2002ZRX1200R9 жыл бұрын
remove the magnetic coil for me lol. I cant figure out how to get my sleeve off
@timschannel9104 жыл бұрын
What year was this
@caillouscruggs23248 жыл бұрын
Does anyone know were I can buy a rear left axle for a 2003 Polaris Hawkeye 400
Пікірлер: 20
Fuckn life saver of a video. Took it apart so long ago I had no idea what was supposed to be in thete
Thanks for this. I didn't realise so many parts were In there
Thanks man that video really helped me out
I have a role pin on the inside , that connects the shaft to the front diff
excelente video
good video...trying to get ball joint off without taking the strut off...pain in the balls.
what do you use to clean up the 4 bearings you took out? wd40? or is that what the hub oil is for?
If that ain’t just the simplest dam thing.. I would think it important to not mix bearings and races, oh and keep all those parts clean off filthy pavement.. the book says fill up rotate hub to 3-4 o’clock position emptying out about 1/2 oil for refill.
Kinda made that look easy.
It sounds like you need to change your belt and go through your clutches I have an 800 it did the same thing very easy fix
yea man thank for vid
How does that clutch bearing work??
do you put grease on the bearings
how did you get the whole shaft out? I had to loosen the strut tower and remove the top tie rod to get the shaft.out of the strut tower
@PHATAT0
7 жыл бұрын
on mine there's a ujoint above that is a roll pin you just punch out and it takes the axle off the diff
I have a 1999 where did you get your parts at. What year is this.
remove the magnetic coil for me lol. I cant figure out how to get my sleeve off
What year was this
Does anyone know were I can buy a rear left axle for a 2003 Polaris Hawkeye 400
@picklesraker9319
6 жыл бұрын
Caillou Scruggs ebay