Келесі
- 12:21
- 4,4 М.
- 00:59
- 7 МЛН
- 11 күн бұрын
- 00:17
- 51 МЛН
- 11 күн бұрын
- 00:19
- 8 МЛН
- 20 күн бұрын
- 00:29
- 13 МЛН
- 22 күн бұрын
- 24:29
- 19 М.
- 9:53
- 30 М.
- 10:25
- 554 М.
- 9:13
- 101 М.
- 22:45
- 2,4 МЛН
- 21:38
- 47 М.
- 20:06
- 2,8 М.
- 0:29
- 3,8 МЛН
- 0:20
- 1,3 МЛН
- 0:10
- 25 МЛН
- 1:00
- 2,6 МЛН
Пікірлер: 231
This just convinced me of buying a Pilot RC Laser. Passion for the job, no one seems to be under pressure to get things done quickly. Feels like they really care, proud of what they are doing. Just great. Thank you for the tour!
@jamesmarsh1307
Жыл бұрын
Hmmm, no jigs for anything. I'll build my own. Seen nothing impressive here. 😒
@my_dear_friend_
Жыл бұрын
@@jamesmarsh1307 - It would be impressive to see a factory in the US full of Americans busily working to create cheap ARF model airplanes for other Americans' recreational desires.
@slange455
Жыл бұрын
@@my_dear_friend_ would be interesting if someone could produce them in the US at 600 to 1000 seems like maybe enough margin? Covering is the killer part
This amazing. People tend to forget that humans actually have to build these planes somewhere. The level of expertise here is amazing! This is just awesome!
@obtv6827
Жыл бұрын
🤔 One man's ARF is another man's scratch build.
This is amazing❤ Almost feel bad to only pay a few hundred dollars for so much hard work. Thanks for sharing👌
Pilot builds excellent airplanes. I've owned several. The Quarter Scale Decathalon is my fav.
Nice to see! Cool how slot and tab eliminates the need for most fixtures!
It’s amazing how they all work like they are building those models for themselves... thank you 😊
Those shipping containers are a marvel of industry!
Hey Tony and Co. Very nice factory and good workers. Still remember my first Yak 54 107" i bought from you in 2011, it lasted around 10 years. First 3-4 years IMAC and then a renovation of engine and new servos for 3D setup. Sold it last summer and after a few weeks it was done. But 10 years and a few small repairs and still flying good , that's good value and a fantastic plane /factory. Thx Max.
I used to build Pilot kits in the old times when you had to glue all the pieces. The kits were excellent.
Hi Tony. I bought my first Rc Pilot Yak 54 107" in 2011 for IMAC and 3D Had it until 2019 and sold it. I have never had better plane and will always fly Pilot -RC. And the Dle i got from you, ran all these years with no problems at all, not even a motor stop. Thx for awesome planes Tony and Co. Nicolas Denmark.
Thank you for building such awesome aircraft !!
Right there is why you pay more for their products. Attention to detail and impeccable workmanship. The finest finished ARF I've ever owned.
Awesome tour, very professional factory. And now I want one of each of the planes...lol
Thanks Tony. Great video of your factory. Congratulations.
Nice place. Good to see someone still builds models, just not many that fly them...
Hi Tony thanks for sharing a little insight of your guys Factory....
Un freaking real , so amazing how this is done. I'm impressed!!!!!!
What organisation and quality,really enjoyed the tour of all the different departments,the workers certainly know their jobs.
@crunchied8
5 жыл бұрын
also its good to see there is women there too RC is for female and male
@TheFrenchPug
4 жыл бұрын
No music and no talking. Very interesting.
Great factory tour. Thanks for sharing
Très intéressante vidéo.Bravo et merci.
Yes! A beautifull tour into your Factory! A love to see the people working in the planes, and here can see the lot of work have to do before we receive the RTF models😄😄👏👏 thanks for share us this great film from an excellent and historic planes builder like Pilot 😎✌️
@krotchlickmeugh627
2 жыл бұрын
These are the furthest thing from RTF you can get without coming in a kit
@amydyke468
2 жыл бұрын
@@krotchlickmeugh627 The “real ready to fly/almost ready to fly” is because 10-20 years ago+ you got a bunch of pieces balsa and YOU had to glue it together. When this came out it was amazing because now, it is “almost ready to fly since you just have to add the components and then put it together. None of this foam RTF crap.
@krotchlickmeugh627
2 жыл бұрын
@@amydyke468 im aware. I grew up in the balsa arf era. Learned how to fly around 2007
@amydyke468
2 жыл бұрын
@@krotchlickmeugh627 ok srry
WOW that facility is amazing! The work pace seems at a pleasant level revealing great attention to detail and quality. Thankfully, it's not a frantic high-production-driven get-it-out-the-door-as-fast-as-possible sweatbox factory that I thought it might be. 👍👍
Fantastic high quality workmanship for a reasonable price. I would not build one of these planes for someone at the low prices these people charge.
The jets at the end are so darn cool!
Great skills and a beautiful work shop. It is so quiet and everyone is working diligently. Thanks for the video
can't tell you how much I enjoyed this video - love of RC - love of China and the people & missing Chinese factories - so nice to see craft & hand made things.
Wow, really amazing to watch. Great quality ... I wish some scale kits were available with these kind of construction as well. Something like a 1/4 scale T34 Mentor? =)
What beautiful models !!!
TOP MUITO LINDO A MONTAGEM DO AEROMOFELOS
For me it's like a kid in a candy store. YES I have a PILOT RC 78" Extra DLE35RA and it's very good build quallity, and it flies realy nice! The second one to come for this summer is going to be PILOT-RC EXTRA 330LX 92" carbon reinforced, and a DLE85.
Хотел бы работать там испытателем моделей!!!😂👍💯
Cant wait to purchase mine next month 😀
what an awesome video !
amazing video! Thank you for showing us how they do it.
Very much appreciative for the quality work you fine employees do. Great Products!
.nice vid..luv the quality of rc pilot,they all doing it with the love of rc....thumbs up.
@D5DRIFT
3 жыл бұрын
Doubt that. It's a job. That's all
Very talented workforce producing amazingly beautiful products. Although factory does look a bit care-worn and its distressing to see them handling glass and carbon fiber and resin without gloves. Better health and safety needed.
@viktorroswell1041
4 жыл бұрын
Just wondering if this is the same company that produced the very good kits in the 1970s?
@d.jensen5153
4 жыл бұрын
And I'm distressed to see you riding a motorcycle.
@d.jensen5153
4 жыл бұрын
@ghgg You don't even realize you've been drinking safety nazi Kool-Aid most of your life. I feel sorry for you.
@CharlieDeltaEchoVict
4 жыл бұрын
@@d.jensen5153 Dont be distressed, its my choice! In a factory, workers dont always have the choice of handling materials that will harm them.
@kev.j.goodwin8612
4 жыл бұрын
The poor devils all look bored to death.
2:07 chic got a nice walk. 7:00 WHAT are you doing?! Excellent video
Fantastic out of this world , complex high.tech designs the amount of models is amazing. Unbelievable!!!
У них очень небольшой запас прочности. Легко ломаются. Делают с минимальным количеством материала. Много фанеры, мало карбона. А если и есть карбон, то тоже тонкий. Мне пришлось много переделывать после покупки подобного самолета. Усиливать многие места стеклотканью и карбоном. Фактически эти модели самолетов расчитаны на посадку только на парашюте. Или на идеальную впп. Любые кусты или высокая трава сразу краш. Все кромки крыльев нужно сразу усиливать стеклотканевым скотчем.
I'm an avid R/C builder and I design my own air craft, boat and car, very much the same technics but much simpler instru- ment, that I am using, I LOVE it
@staho9796
Жыл бұрын
to manufaktura seryjna ...dla pieniędzy a nie dla pasji !
These planes are beautifully built !!!! I am happy to see many are wearing masks as balsa dust is dangerous if breathed in and will damage lungs .
Amazing organisation,just think of all the buying in of raw materials to ensure a smooth production line,there must be a healthy demand for these kind of models but we do not see many in the UK ? good workers too.
Nice factory but those people sanding need better dust protection for sure!
like the way everyone has a booth. no office- no nothing.
Awesome i'm need one extra ng
One step more and they are robots. Thank you Klaus Schwab!
Excellent work. Greetings from Buenos Aires Argentina . ✈✈✈👍😎👍✈✈✈
Exceptional!
I want to dggin' it's like a buffet that has been prepared by chefs!
Linda Oficina parabéns
My anxiety was going up just watching them cover those plans, and seeing the line up awaiting them... I guess I have no excuse now. I need to start covering all those bare bones airframes I have in the basement...
When I was young, we were making RC planes ourselves(smaller)... It was real hoppy, now it is just about money..
Interesting! Thanks
素晴らしい、頑張って下さい。
where do you buy them??
The granite work tables should assure accurate, warp free structures, very unlike the models I build,,,LOL.
First time seeing in RC pilot factory, Complete 3D print and laser cutting, Wow,amazing!! How to make buying from the factory by personel person?for hobby only. Please" Like👍👍👍
They make good planes, and they're really good looking planes. But the sad parts is' we cannot compete with their labor cost.
Im glad this provides a living for these people in China, but its also shameful that hobbiest are not willing to put in the time to build there own models anymore. So its a bitter sweet thing.
I wish you guys could up the scale enough, to produce some exportable experimental manned airplanes! That, would really be cool! A lot of homebuilt kits here in the states, are over 30k! My wood and fabric Mini-Max Eros kit, is $6,500!
@krotchlickmeugh627
2 жыл бұрын
These planes are $2k plus in this size. What do you think they would be in full scale size? Factor in shipping too.
God bless them, I love flying rc planes but never again will build one.
Over many years I've assembled a lot of ARFs. Scratch built a lot of models too. Crashed nearly all of them eventually. I am assembling my first PilotRC model right now, and I have to say I'm very impressed with the general quality. But having watched the sheer misery of the factory where it was built I will now always feel guilty about owning it.
@grammophonecat
2 жыл бұрын
What sheer misery are you talking about? They seem very content and well taken care of, the pace is swift but not rushed. Have you been to many Chinese / Asian and even some European factories??
@aml1234561
Жыл бұрын
Mr. Farrow, you must be watching a different video to the rest of us or is your mind simply equating a factory in the Far East with an automatic "sweatshop" label? A calm and peaceful workplace producing high-quality products in an unrushed manner does not equate to misery or hardship. Very silly and unnecessary comment.
Блин у нас такие площади будут стоить просто непомерную аренду. А тут всё красиво удобно и чисто. Аж зависть берёт. Я правда не знаю кому нудо такие большие модели. У нас их никто не строит и уж тем более не покупает - дорогие очень.
@kotnapromke
Жыл бұрын
Вовсе нет. Если не в крупном городе, то таких площадей очень много. И дешевых.
@skeletumart4498
Жыл бұрын
@@kotnapromke У нас в городе в жопе мира с вечными пробками цех 50Х25м ч небольшим вторым этажом это 120к/в месяц без электричества.... как бы не супер дёшево. Возможно где-то на севере области в маленьком посёлке можно найти заброшенный ил полу заброшенный цех. Но кто там будет работать? Если предлагать такие зарплаты и условия, чтобы работали вахтой тодешевле в городе искать цех.
Imagine what North America could be like if people were as dedicated to doing their job instead of talking and complaining about everything
@krotchlickmeugh627
2 жыл бұрын
Its not that. Its the regulation. You could fill 20 warehouses just with pages of government regulation documents.
can I buy Directly from you?
The jet on the table yellow, red and black is that a 2.7m or a 3.3m ??
Great video but the guy at 17:17. lol
That's the first time I've seen a curtain of water spray to filter air. Seems like a good idea.
@richardblencowe3924
4 жыл бұрын
Been very common in the spraying industry for years. Used that system over 25 years in the automotive industry here in the uk.
Every time I hear a derrogetory claim, "It's made in China", I tell them, good products come from quality control. Not from geography. This videos proves that.
@davidregan9872
4 жыл бұрын
I agree! I seen a Stihl weed eater that came from China!
@darrylhaynes9208
4 жыл бұрын
So did corona
@davidregan9872
4 жыл бұрын
@@darrylhaynes9208 We need to know if it was man made. I've been hearing on line that it was!
@krotchlickmeugh627
2 жыл бұрын
@@davidregan9872 it was. Or its a lie to destabilize our economy and create a crisis so instead of going to war. We destroy ourselves. Its working
I'm from India it really great super !¡!!!!!
I wonder why is so strange in our factory or company culture not to request employees to be in uniform, to me it gives a sense of professionalism. I've watched videos of other types of factories like Ducati, Volkswagen in Germany, Porsche etc. and technicians, assemblers, engineers all wearing their company uniforms it really looks neat and organized.
@krotchlickmeugh627
2 жыл бұрын
You want to have up tight un-happy, low production, i like the smell of my own farts over paid ceo. Have at it. But a casual unstressed work environment produces the most quality product. Period. Just because the germans force their workers to look like douchebags doesnt mean the product is the best. In fact german cars are shit.
@grammophonecat
2 жыл бұрын
@@krotchlickmeugh627 shit compared to what? American cars… ?
I always wanted to know what heaven looked like 👍
I laugh when the politicians say “MAGA”. Yeah right I see the factory in a location in USA. “We want our rights back, we need more insurance and better working conditions”. It would close like in 6 months. These people work because they follow instructions and get paid, period.
And I thought I was good with Monocote. These kid's put me to shame.
With this kind of skill level I think these guy's can build a full size one and fly it
@Igor-xl4wz
4 жыл бұрын
Thank god you don't work for Lockheed.
@krotchlickmeugh627
2 жыл бұрын
@@Igor-xl4wz lockheed is an overpriced joke.
I want to live there.
May I attend the work in this workshop?
I m loving it Its my dream
@vimp5594
3 жыл бұрын
what is your dream? work for a bowl of rice in the dark and mud? It's kind of fucked up with your dreams...
Great vid...👍
Are they still in business? I looked at their US distributor and they didn't carry any of their planes.
Lovely toys
Can you buy such a plane as wood kit?
Where can i find the Manual for the 330lx?
@cymaz100
4 жыл бұрын
www.pilot-rc.com/manuals/
Can I order it direct from you?
is the factory in China or Vietnam
How long has one oft these people to work, to achieve one oft these planes?
Are these just for martin pickering to crash lol
@krotchlickmeugh627
2 жыл бұрын
Yup. Only he can afford one.
I would like to procure such a model.
Excellent walk-through. A bit more time at each station would have been nice. A guided tour would be a life time event. Would the workers ever earn enough to buy one of those?
@krotchlickmeugh627
2 жыл бұрын
No. They barely can afford a scooter.
Is it possible to replace the wood with aluminium sheet
Phew...motion sickness.
How there made interesting
great
17:17 . . . . what to do today :-) hahahahaha
@duschiavon
4 жыл бұрын
BeyondXtream employee busted! Than he realized and pretended to be doing something 🤪
do you manufacture xxxl f5??
We pay 5,000 for these planes and these people get pennies for building them.
So many work just to make other/rich peaple pleasure 😪
Ge a short course on camera work, buddy!
I am pleasantly s'prised at the degree of safety and PPE...