The "Track Motion" tool is what I was looking for! Thank you!

Excellent! Thank you!!!!

thanks your the best

Thank you so much! Saved me and taught me at the same time!

Thank you! I have been searching for this for a looongg time! You helped a lot thanks!

excellent tutorial

This is the second time that I have watched this excellent video Steve. I love your voice and professional presentation. Thank You. I do split screens every once in a while and I keep forgetting between times how to do it. :)

@sgrisetti

7 жыл бұрын

Thank you, Quail!

Big help thank you

Thank you

THANK YOU! this helped me finally figure it out!

Thanks so much for showing us how to do that! :D

Thanks for a nice and thorough tutorial!

@sgrisetti

7 жыл бұрын

Thank you, SuperM!

Steve you the Man... thanks

Thank you very much, this was really helpful.

Thank you so much.

@sgrisetti

7 жыл бұрын

Thank YOU, d!

Thanks! that helped me a great deal!

best vid I've seen from you, thx.

@sgrisetti

6 жыл бұрын

Thanks, GC!

I don't have track motion option ? how can i find it? i dont see it as a tool/button anywhere.

Note to viewers of this tutorial you need the PLATINUM version of Movie Studio to use the track motion button. and you have to put it in Advanced Mode to be able to see the track motion button. The Advanced Mode should be an option in the Platinum version at the top left of the menu options. I'm telling you this bc i wish at least one of the dozens of tutorial videos and community forums mentioned this and I wish ONE person would have told me this. Over the years I have downloaded both the "regular" version and the "Platinum version" of Movie Studio as trials and as purchases, before settling on my preferred video editors bc there are a lot of other options, and you don't reaaaly know which you prefer until you've created a few projects in them. Actually, I use more than one video editor and it really depends on the project. In some cases the Movie Studio features are overkill. Anyway, over the years I have changed computers at least 3 times since I first started editing in Movie Studio, and honestly I never knew or paid attention to the difference between the non Platinum and Platinum version, likely because at the time I downloaded the trial I wasn't in need of the advanced features, and/or if I was it was only for a small option like Track Motion for ONE video, not a feature I was consistently using and not for multiple advanced features. More recently, I've been using the non-Platinum version splendidly, for some pretty amazing projects, where I used a lot of FX features, but clearly not the Track Motion feature, until now. Which funnily, the project I'm using the Track Motion feature on now is on a very low quality video I don't really care much about aesthetically, I just want to be able to do picture-in-picture, which REQUIRES the track motion feature to do it most effectively. So it wasn't until this project that I realized I needed to go back and find my original Serial Number for Movie Studio PLATINUM which I bought 3 years ago (and voila! It was in a confirmation email I got when I purchased), and it still worked! I will say for most projects, even very high quality videos, the Platinum version has toooo many features, If you film a video well you shouldn't need a ton of post-production features to "adjust" or "fix" it. So in some ways I still prefer the clean simplicity of the non Platinum interface. But I'm sharing this, bc I WISH someone had told me this. It would've saved me a lot of searching on forums and tutorials for such a simple answer. So simple that no one, not even Sony in their help forums and help manuals, thought to mention it.

@sgrisetti

7 жыл бұрын

The few dollars more you spend for the Platinum version of the program is money very well spent. My books and my web site only recommend and support Movie Studio's Platinum version.

@omarijinaki158

7 жыл бұрын

Yep, thanks I have the Platinum version. It would be helpful if you mentioned in the title of your tutorials the specific program you provide advice for is the Platinum version. and make it clear that you're aware the features you're providing tutorials for do not exist in the non-Platinum version. The title and description of this tutorial video "Creating picture-in-picture and split screen compositions in Sony Movie Studio" mentions nothing about the Platinum version. Since it's a tutorial for the Platinum version, I think you should mention that.

Great tutorial Steve. I knew how to do the PIP but I learned something new. I never realized you could 'right click' and just drag the video, or audio, to the timeline independently Thanks for that tip! :-). I'm a little confused though why the pan & crop that you used to put Jason up in the corner of your video couldn't also be used to create the 'split screen' you did towards the end. Is there any particular reason you used the 'track motion' option instead ( pros / cons ? ).

@sgrisetti

8 жыл бұрын

+MrGrunthunter's Adventures Nope. You can use either. One affects only the one event, the other affects the entire track. Beyond that, just a matter of preference.

extemely helpful. Thank you so much for the different tips and tricks!

@sgrisetti

7 жыл бұрын

Thank you, Heidi!

@DGSWM

7 жыл бұрын

Steve Grisetti no, Thank you. I just started the trial version of this program, to see how I like it before buying it. The things you demo'd in this video were not in the tutorials they provided, so this was a huge help to me. so far, I have nothing to dislike about this program! thanks a bunch, again.

Thanks.

Thank You

OH! I was on the right track, just backwards. Got it. Okay, thanks for that mate. Clarified for me.

I have Sony Movie Studio 13, but on my track there is no icon for track motion. Just Track FX, Mute, and Solo. I can't seem to find a track motion setting anywhere. Anyone got any advice?

@sgrisetti

5 жыл бұрын

Do you have the Platinum version of the program? The plain vanilla Movie Studio is pretty stripped down.

Help. Somehow I switched my preview screen so that everything plays in black and white! The time line itself shows color images but not the preview screen. Can you help? Thank you.

@sgrisetti

7 жыл бұрын

There's not a setting in the program to do that, so there's something outside the program going on. First go to the nVidia, AMD or Intel web site and ensure you have the latest drivers for your graphics card. If that doesn't do it, I'm not sure what to recommend -- but, as I say, there's no way to make the program preview your movie in black & white even if you want to (other than, of course, adding a black & white video effect to it).

@seguelawrencedoering394

7 жыл бұрын

Thanks, Steve, for your reply. However, I was able to fix the problem though I don't remember the details.There are 2 boxes on the main screen near the timeline that allows one to change the color of the preview box (blue, green, red ect.) It was one of the 2 boxes there that the problem was solved. I purchased your book and look forward to learning. My big hope is to learn the split screen techique. Watched your video but think the book may help too. Thanks again for your speedy response.

hi i like your video tututrial on adobe premiere elements 14, is there any way to change the project setting in a non standard predefined setting, i would like to make a porject setting of 1440 x 1440

@sgrisetti

8 жыл бұрын

I don't know of a way to do that in Movie Studio.

@Desi1992

7 жыл бұрын

Justin Bourne Hi you click the project property box and there is an option to change aspect ratio I think it is that is where you type in your numbers the 1400 by 1400. :)

Does this work in the basic Sony Movie Studio or just in Platinum? The title of the video says Sony Movie Studio, but in the video you're using platinum. Thanks.

@sgrisetti

8 жыл бұрын

Sorry, I don't know. The basic version of Movie Studio is so basic I've never bothered to get to know it. Platinum is so much better of a deal all around!

@omarijinaki158

7 жыл бұрын

@TheKeyboardChemist. I DO know the answer. The answer is you need the PLATINUM version of Movie Studio to use the track motion button. and you have to put it in Advanced Mode to be able to see the track motion button. The Advanced Mode should be an option in the Platinum version at the top left of the menu options. I'm telling you this bc i wish at least one of the dozens of tutorial videos and community forums mentioned this and I wish ONE person would have told me this. Over the years I have downloaded both the "regular" version and the "Platinum version" of Movie Studio as trials and as purchases, before settling on my preferred video editors bc there are a lot of other options, and you don't reaaaly know which you prefer until you've created a few projects in them. Actually, I use more than one video editor and it really depends on the project. In some cases the Movie Studio features are overkill. Anyway, over the years I have changed computers at least 3 times since I first started editing in Movie Studio, and honestly I never knew or paid attention to the difference between the non Platinum and Platinum version, likely because at the time I downloaded the trial I wasn't in need of the advanced features, and/or if I was it was only for a small option like Track Motion for ONE video, not a feature I was consistently using and not for multiple advanced features. More recently, I've been using the non-Platinum version splendidly, for some pretty amazing projects, where I used a lot of FX features, but clearly not the Track Motion feature, until now. Which funnily, the project I'm using the Track Motion feature on now is on a very low quality video I don't really care much about aesthetically, I just want to be able to do picture-in-picture, which REQUIRES the track motion feature to do it most effectively. So it wasn't until this project that I realized I needed to go back and find my original Serial Number for Movie Studio PLATINUM which I bought 3 years ago (and voila! It was in a confirmation email I got when I purchased), and it still worked! I will say for most projects, even very high quality videos, the Platinum version has toooo many features, If you film a video well you shouldn't need a ton of post-production features to "adjust" or "fix" it. So in some ways I still prefer the clean simplicity of the non Platinum interface. But I'm sharing this, bc I WISH someone had told me this. It would've saved me a lot of searching on forums and tutorials for such a simple answer. So simple that no one, not even Sony in their help forums and help manuals, thought to mention it.

my preview screen had disappeared , how do I get it back?

Hi Steve. Thank you so much for the tutorials on Sony movie Studio 13. I have two questions for you 1) When I want to insert just a video clip and the video & audio tracks both come onto the timeline, how can I delete just the audio track? 2) Am I able to enlarge the monitor in SMS 13? Once again, thank you so much for your time. This will be my first movie and I want to get it just right. Stay well.

@sgrisetti

8 жыл бұрын

Drop by our free Community Forum at Muvipix.com and I or one of our friendly and knowledgeable community members will be glad to help you out. In fact we may even have tutorials on our site that show you how to do what you want to do!

Thanks for this very helpful tutorial! Unfortunately I cannot seem to do what I need, which is to apply a 3x4 PIP over an area of a 9x16 video. (I'm going for a sort of newscast look, with a squarish picture over the announcer's shoulder -- a widescreen shape for the overlay won't fit right.) When I try resizing the overlay this way, it gets cut-off if I try to slide it over toward an edge of the screen. I hope I explained that OK (if you try it you'll see what I mean), and that there is some kind of workaround. Any thoughts, Steve (or anyone)? Thanks again!

@sgrisetti

7 жыл бұрын

Dan Magoo I'm glad to help you out with that, Dan. Just drop by my free Community Forum at Muvipix.com and post your question and we'll be glad to show you how to work with your unique situation.

@danmagoo

7 жыл бұрын

Thanks, Steve, will do!

will this work in sony movie maker platinum 12.0?

@sgrisetti

8 жыл бұрын

+Rose city crafter Absolutely!

@Rosecitycrafterdarylhallfan

8 жыл бұрын

ooh,yaayy,lol.thanks!

The track motion button isn't showing up for me to click on? I have movie studio 13. PLEASE HELP!

@sgrisetti

8 жыл бұрын

+Bianca Vettise Are you talking about the Track Motion button on the Track Header? Try widening the track -- and do ensure that you're looking at a video track. There is no Track Motion on audio tracks.

@kellidougal7576

8 жыл бұрын

+Steve Grisetti I'm having this same problem. There is a track effects button but no track motion button. It's definitely a video track and I can't widen the track header.

@sgrisetti

8 жыл бұрын

Can you post a screenshot of it to my Community Forum at Muvipix.com so I can see what you're describing? BTW, you are using the Advanced mode in Movie Studio Platinum, right?

@Desi1992

8 жыл бұрын

hi Track motion is in movie studio 13 platnium not movie studio 13 platnium has an advanced mode that has a whole lot of other featers.

@omarijinaki158

7 жыл бұрын

Same problem. Video track for sure. By "widening" do you mean heighten the track? It is as high (or wide) as it can it. If we need to turn on advanced mode, i have no idea how to do that. I been clicking every "preference option" for an hour.

LOL 69 COMMENTS GET SHREKT. also thanks for this tutorial it really helped my booty.

yote

wasdwadw

asd

asd

asd