Best base coat ever in my opinion

Very good and simple example explanation.

great demo , lets say the job is alot larger than a hood/bonnet, and i notice mottle, lets say its already flashed , can i apply another full coat then another drop coat , or apply the blender to the 1.5 coat surface then apply another drop coat ? cheers

@Spieshecker

6 ай бұрын

Thanks for the question. This is probably the most challenging fix due to the fact that already flashed basecoat will absorb any subsequent coats applied over it making it difficult to achive a homogeneous film. It really depends upon the severity and extent of the problem you are trying to fix. Small localsied areas can be corrected using RFU material at low pressure - 0.8 - 1.0 bar to apply a droplet coat and disguise the issue . Please see an example of this technique here kzread.info/dash/bejne/ZmekrLiwY6vcmdo.html For a larger area you can apply an even coat plus an additional effect coat without over applying/wetting the substrate but he safest way is to apply clear, dry, sand and reapply the system.

@BogDustForBreakfast

6 ай бұрын

@@Spieshecker thanks for your reply. Have been using this system for a month now in a busy smash shop . I feel after a couple of weeks I have my head around the product now . I’m looking forward to creating content using the system and promoting your products. Thankyou

@Spieshecker

5 ай бұрын

thx for your feedback and glad to hear your are now into it! Happy days...

Thanks brother

@Spieshecker

2 жыл бұрын

Welcome

Nic Application Sir

@Spieshecker

3 жыл бұрын

Thanks

How does this apply on darker colours with pearls and metalls like Renault kpn. I have problems with mottling on these colour groups but none on silvers.

@Spieshecker

8 ай бұрын

Hi, thanks for the question. This method will work equally well on darker colours where some additional control may be needed.

@leonidaskaratzikos2052

8 ай бұрын

​@@Spiesheckerproblem solved. I quit using Sata for color. Instead i use Iwata Wbx and i have no more mottling. Thank you for your response.

hi..can i ask what is criss cross pattern in spraying and what is the purpose of that spraying pattern? thanks

@Spieshecker

3 жыл бұрын

This describes a technique where you change the spraying direction over a panel from coat to coat i.e. first coaon a hood is applied from the side to the middle and then completed from middle to opposite side. In the second coat you spray for example from the back of the hood to the middle and then the middle to the front edge thus shifting the overlaps in the belief you will avoid stripes in your basecoat. In reality as long as you concentrate on your distance to the object, overlap and speed you can control stripes/mottling etc as shown in the video.

@crislarracas4951

3 жыл бұрын

@@Spieshecker thanks...

The fluid tip is 100% open? Even by the evect coat?

@Spieshecker

5 жыл бұрын

Yes the fluid tip is open 100%, the only difference is the distance for the effect coat.

@louiseckstein8210

5 жыл бұрын

Thank you 👌😊

Tip and pattern recommendations? 1.2 RP O ?

@Spieshecker

15 күн бұрын

Thanks for the question, with the Sata 5500 1.2O I would suggest an inlet pressure of 2 bar (approx29 psi) and a full fan.

How do you fix it. If the paint is dry before you see something you don’t like?

@Spieshecker

5 жыл бұрын

Thanks for your question and sorry for the slight misunderstanding. In the video we show how to fix any mottling whilst the paint is still wet, which is the best way to remedy any mottling. This is a common question we get during trainings and customer visits. However we know what you mean, and we have already other videos in production to deal with this topic.

@bkbangherr

5 жыл бұрын

I've found if I mix it with some 1051 n kinda blend it out a bit works I've also just wet bed the area n did my thing n have had some luck even though it seems like it dont wanna go on it all works out in the end somehow best thing is to try n keep everything clean and focus on perfection I love this base though way better than ppg in my opinion

@Spieshecker

5 жыл бұрын

We will have a video coming out soon to show you how to rescue the job in this case, and avoid making a rework.

@Spieshecker

5 жыл бұрын

Please refer to the blending video, this is the way the product was developed and it really does work.

The gun is 1.2 or 1.2w? It's a RP? Thanks

@Spieshecker

5 жыл бұрын

It’s an RP 1.2, we prefer the normal 1.2 in our central training and product team.

Добрый день. Спасибо, 977 получился в цвет

@Spieshecker

2 жыл бұрын

👍

Whats the psi in silvers ?

@Spieshecker

2 жыл бұрын

For normal application we recommend 2Bar inlet pressure which equates to approximately 29psi.

So being someone who has sprayed spees for years in a major DRP shop I only wish we had the ability to allocate the time you have to said job. unfortunately that's like watching a fantasy movie..... I promise you there is much more efficient ways to spray this paint and have it save 10 fold on the material plus I have the best quality/materials numbers in the USA for my company we have 1800 painters.... first of all you didn't remove the bumper.... how can you do a proper repair like that? You have to remove all parts and do a full tear down to evaluate all damages not to mention if you just tape everything off it creates soft edges which degradate and fail over time because of UV exposure your color may match you failed miserably at a quality paint job

@Spieshecker

3 жыл бұрын

Very pleased to hear you have such good numbers, well done. Actually you are in some ways missing the point of these videos, yes these are filmed in training facilities but they are intended to show process. I would agree that removing parts is the best way to operate but not everyone has the luxury of being able to do that. We get a lot of positive responses to our videos and the information given in them, sorry they don't work for you.

@deanholloway7755

Ай бұрын

Thats it, you tell the manufacturers training centre how to use their products and completely miss the point that it's a training centre not a body shop. Brilliant 😂