I finally got to use this double drop coat method on the Tacoma bedside,it's much better technique than mine by far, i was able to see the difference under my portable sun light. I'm 47 ,who says you can't teach a old dog tricks.you did to me ! thank you again !

@MOTIVATEDPAINTERS

7 жыл бұрын

+audi4ever haha I'm so glad my friend!!! It worth spending hours editing to see a comment like this one! Thank you!!

nice video bro keep moving forward💪

Great video and a precise informative commentary.

@MOTIVATEDPAINTERS

5 жыл бұрын

Thanks my brother !!

Great videos learning alot thanks!!!

Thanks for sharing your knowledge.

👍 good tips 👌 thx for your time

Hey Gabriel I'm a subscriber and really love your videos they've helped me a lot improving my work to a better result, my paint and clear are pretty good I've only got trouble on waterbase colour matching most of the time my colour looks lighter or darker even though it comes up as a 4 or 5 on spectro, I always check the colour before spraying it looks really good and blendable but when I paint most of the time you can see the difference, please I know you're very busy with work and videos but if you do get the chance please make a video of how you choose the colour how you mix and how you choose the colour thanks man

@MOTIVATEDPAINTERS

5 жыл бұрын

Hey brother thanks! I suck at color matching hahaha I would try to use a different gun and see if that makes a difference. Sometimes the gun sprays in a way that changes the color but I will try my best to do a video

Thankyou, that was great

@MOTIVATEDPAINTERS

7 жыл бұрын

+Tosh twentythree I'm so happy that it helped!

Always paint edges and difficult areas first to avoid runs. Your wheel edges as well which you didn’t do. I always change my overlaps sections on each coat. Never the same twice like you did into the fender and quarter panel It helps make sure you get proper mil all across each panel. Hope that tip helps guys out.

@bstevermer9293

4 жыл бұрын

Frosty You should make your own video !!

You only get stripping or corn rows is PPG, you did a good job btw considering the junk paint..

I know this is an older stream but Im curious on the hood. You masked the hood to the edge of Im guessing a body line but how do you not get a variance in the colors or a tape line? Its awesome how you tend to try and answer all the questions from the viewers.

Thanks

The blender helps as well

Please do u have some idea how can make a clear very very smooth never orange peel I use clear ec520 thanks for u bro

Hey buddy. Great job making your videos, teaching, explaining and how you live your life with your approach to all of this. Very inspiring.. I see you using this blue paper masking or plastic.. why do you use this instead of the clear bag that comes from the roll? Thanks

@MOTIVATEDPAINTERS

4 жыл бұрын

Thanks so much!! We are now. It was because I have 5 preppers and they all do things differently

As a suggestion to viewers .... Can you mention how much paint , primer etc , clear was mixed for each repair , ie bumper xx oz used, or door xx base mixed. Can you also show us how you make let down cards for colour matching tri coats or difficult colours to match during blending

@MOTIVATEDPAINTERS

7 жыл бұрын

+henri I will try my best 😀😀

Does the iwata lph400 work for base with ppg water base, I have the nova for clear I am switching from solvent to waterbase or should I look into getting a sata 5000hvlp for base

How long did u wait in between coats

I’m spraying solvent base coat on dealer jobs... quick question. I know for water you lower your pressure on the drop coat, but what about solvent??? It’s been a good 6 years since I’ve sprayed solvent and I think we used to RAISE our air pressure for solvent. Do you know???

@MOTIVATEDPAINTERS

5 жыл бұрын

I believe you are right my friend

doing a nardo grey soon haven't painted it before. it's a solid should I do a control cost as well. Haven't done a solid colour in a very long time been doing Metallics

@MOTIVATEDPAINTERS

7 жыл бұрын

+Sahil if there is not mettalics don't control coat but if you are having trouble blending of leave your pressure at 28and pretend you are applying a control coat

😍😍😍😍😍

Hey man, I’ve heard that if you put the control coat on when it’s flashed you can run into adhesion problems with the clear. Basically you are putting on a mist coat. What’s your opinion as a expert and your experiences?

@MOTIVATEDPAINTERS

3 жыл бұрын

All paint lines are different. Ppg you are supposed to let it flash off before applying control coat and also clear coat

hi my Friend, how's everything, thanks again for your job,thanks for your time, because in USA Time is very expensive,But you find the time and do these cognitive videos for us.thanks. bro tell me please, im going to buy iwata ws400 as a told you before, so better to buy 1.3 or 1.4 for clear???

@MOTIVATEDPAINTERS

7 жыл бұрын

+Sergey Hovhannisyan I would buy a 1.3 my friend. Thank you so much for your kind words

@sergeyhovhannisyan1116

7 жыл бұрын

MOTIVATED PAINTERS thanks again bro.

@MOTIVATEDPAINTERS

7 жыл бұрын

+Sergey Hovhannisyan my pleasure!!

hey man, what's the wax and grease remover you're using to wash the panels ?

@MOTIVATEDPAINTERS

7 жыл бұрын

+Alejandro Magana hello! It's called prime wash and it's made by calsco

Motivated painter,why are you using the Sata 5000.? Didn't you say you like & prefer the Devillbiss base coat gun..because of it's lower psi ability...!!

@MOTIVATEDPAINTERS

7 жыл бұрын

+Arianamarie Fernandez because I have multiple jobs on the go. So I have different guns I use 😀

What's right pressure on sata 5k hvlp for drop coat 1.2/1.4 ?

@MOTIVATEDPAINTERS

3 жыл бұрын

18 psi

👍👍👍👍👍👍

How do you make sure you don’t cause the car you’re painting to look seedy after clearing after your drop coat?

@MOTIVATEDPAINTERS

4 жыл бұрын

Few things is make sure you are reducing the base like factory says. Also painting temp between 75-80 degrees also you can use a wet bed

@TheRealSirPreame

4 жыл бұрын

Thanks I will try that and let you know the results. Currently I tried turning the heat off to do the drops and i got a cleaner results. But I’ll try the 75-80 range.

Came out nice How much paint did you use 👍

@MOTIVATEDPAINTERS

5 жыл бұрын

Haha this was while ago!! No idea

@timothyadonis4970

5 жыл бұрын

😊 ok 👍👍👍

Hello, what do you use for the control coat?

@MOTIVATEDPAINTERS

7 жыл бұрын

+nylsson lopez depending on the gun I drop my pressure to 15-18 psi and I move faster. Not sure if that was your question

What is control coat or what to use as control coat please some body answer

@MOTIVATEDPAINTERS

5 жыл бұрын

Look at the silver playlist. It's the last coat before clear. All paint company call it something else but it's a coat to get the mettalics to stand up properly

What reducer do you use? I use T494 and I think it dries too fast causing mottling

@MOTIVATEDPAINTERS

3 жыл бұрын

I use the same but I think ppg has a slower reducer for super dry areas

@intraw831

3 жыл бұрын

I think we use it but rarely, other people in the shop recommend it for tri coat

If you lower the pressure when applying the drop coat, isnt that going to make the particles/metallics larger?

@MOTIVATEDPAINTERS

7 жыл бұрын

+Brulserz the control coat is supposed to be applied at a lower pressure that is the way to get the Metallics to sit the way they are supposed to 😀 that's what ppg says anyways 😁😁😂

@Brulserz

7 жыл бұрын

And if you are spraying solvent based, whats the deal then?

@MOTIVATEDPAINTERS

7 жыл бұрын

+Brulserz I don't spray solvent so I can't pretend to know that my friend

@Brulserz

7 жыл бұрын

I understand. Thank you.

@MOTIVATEDPAINTERS

7 жыл бұрын

+Brulserz your welcome! Please forgive me for geeing no help 🤤🤕

When doin your lighter colors do you use 490?

@MOTIVATEDPAINTERS

3 жыл бұрын

Yes I tend to!

This is ppg solvent base?

@MOTIVATEDPAINTERS

7 жыл бұрын

+MILE VOJVODA no it's PPG water-based envirobase

@MILEVOJVODA

7 жыл бұрын

Sry my Engl..no metalic particles inside black base?

@MOTIVATEDPAINTERS

7 жыл бұрын

+MILE VOJVODA neither is mine!! Straight back BMW 668 no Metallics

why are you only masking half of the car? is your spray booth that good???

@MOTIVATEDPAINTERS

7 жыл бұрын

Luis De Leon we spray mask the rest of the car it protects it from overspray 😀

@luisdeleon2703

7 жыл бұрын

MOTIVATED PAINTERS oh okay, I never seen that trick before lol

@AlexS-wl3nc

6 жыл бұрын

MOTIVATED PAINTERS i have heard of spray masking, but i didnt know anybody actually uses it. I always figured it was quicker just to bag the car.

what pressure is your control coat

@Irfan-or9sd

5 жыл бұрын

Can you reply?

@MOTIVATEDPAINTERS

5 жыл бұрын

18 PSI 😁

@Irfan-or9sd

5 жыл бұрын

@@MOTIVATEDPAINTERS thanks

really nice video. Can i send you dm?i have a question for you that i really need to talk about so i could understand it.hope i get a reply from you thanks keep it up. nicee 👍⬆️💯

Durr the way you say blend makes me mad 🥴THUMBS DOWN!