Man i have to say, this is probably the best "how to" 3d printing channel. There is just something with "older" people that they explain everything clearly and properly. Its often i watch a video and end it with more questions than i had before the videom but now that i found your channel i find everything i need and alot more info i could need. Oh and there was a long time i wondered why people dont use a leveling tool to level until you explained that its not actually leveling but making the bed paralell with the nozzle 😅. Now it makes alot more sense

I'm loving this firmware. Thank you for highlighting it and doing your install video. Just switched from tevo printers to ender and your videos have been a great help!

I'm LOVING your videos SO MUCH, especially now that I got my V2 assembled. This UI looks fantastic. I'm definitely going to join your Patreon and even consider Jyers and Marlin! Thanks!

One of the top presenters on YT for 3D printing. Speaks very clearly. Gets straight to the point. Explains what needs to be explained. No BS. Love the links to related videos, the sample STL file and the firmware downloads.

I just started working with the Ender 3 v2 and this video along with the predecessor one on the JyersUI saved the device from a watery grave in the lake. Thank you!

Your videos are great, I love the detail and the pace. Now have my ender 3 v2 behaving again thanks to you!!

I really enjoy referring to your videos. I'm new to printing and you're making the process much easier, thank you!

Super good video. I've watched your previous video about the JyersUI and I am finally ready to upgrade the firmware, but seing this video I feel comfortable enough to upgrade it with the ManualMesh version. Many thanks! You've got yourself a new follower :)

I know this is an older video, but this was incredibly helpful. Most other tutorials about leveling just sort of gloss over the leveling process and don't even talk about manually setting up a mesh. I'm new to 3D printing, and was so frustrated I was about to throw my new Ender 3 V2 out of the window. lol Now things are printing incredibly well. Thanks very much for taking the time to make these videos.

Bought an Ender 3 V2 last weekend and I'd have been so lost if I hadn't found your videos Bryan. Thank you for the amazing content and being such an awesome educator!

@BV3D

2 жыл бұрын

Thanks for watching the videos! I'm glad they were helpful! 😊

Many thanks BV. I've been very happy with the JyersUI software, which I installed shortly after your video. In particular the way it captures BLTouch failures. Marlin had often (4 or 5 times) notified me that the BLTouch sensor had mis-fired by letting the Z stepper motor skip as it tried to push the nozzle through the build plate. Jyers just stops everything and puts a notification on the display. Love the auto meshing too, and the visualization of the leveling results. I had an issue with the left side being lower than the right. This feature helped me see (and correct) the problem.

He’s very informative and I enjoy watching his videos but for any of us older people out there doesn’t his voice resemble Casie Kasem while his looks reminds me of one of the Bee Gees... lol.. not an insult cause I always enjoyed listening to them as well . Keep up the great videos man!! I’m just jealous cause I can’t grow hair anymore lmao 😂

@BV3D

3 жыл бұрын

Coming up next on Creality Bedstand... 😂

@nosetron3044

3 жыл бұрын

Oh snap, now that you mention his voice, oh yes!

@Savage1776_

2 жыл бұрын

I've said the same in other comments

you my guy have taken all my frustration away with this info. i got rid of the bl touch and followed this video and after weeks of trying to get stuff printing correctly i finally have a working printer with great results.

You're simply incredible, I couldn't do it, but after following your instructions on G-CODE and Z-offset, everything was perfect. Man, thank you so much!!! Very much

This was such a useful video! Thanks very much. I too had the same problem of a quite pronounced dip in the middle of my Ender3 V2 bed and even levelling the sides meant that prints in the middle kept lifting off. After installing the Jyers firmware and following your instructions, the prints are perfect!!!!

Thank you so much for introducing me to the Jyer's UI for the Ender 3 v2. It really makes the printer much easier to use. I downloaded the 5x5 manual mesh version and it's working great. I've had to do some trial and error to get it tuned but I'm making progress. I'm an American residing in Ecuador. When I go back to the U.S. for the holidays I'm going to get a CR Touch to automate the process of fine tuning the leveling of the bed, but the manual mesh is a great help. Thanks again.

DUDE! I'm using this firmware and despite trying a bazillion times to use mesh leveling, your video taught me how to do it the good way! For whatever reason, since the mesh leveling process starts at Z=0.2, I assumed (wrongly) that I need to get a 0.2mm gauge and adjust the microsteps so in that particular point the nozzle is low enough to grab the feeler gauge. I was so wrong! I need to use the thinnest one I have (0.01 AFAIR) so that I'm leveling as near 0 as possible. Thanks a lot! You've just gained a sub. Keep up the great work! Woohoo!

Can't wait to get mine and get all this set up. Thank you for posting this video.

This is THE best 3D printing channel. Thanks Bryan!

Many thanks for the precise and very helpful instruction vlog on Manual Mesh Leveling for Ender 3 V2 ... you saved me a lot of time!

thank you so much! i cant explain how hard i have been trying to level my bed for the longest time with achieving no success, finally i figured out that my bed is warped from factory. and watching this tutorial, not only i was able to level my bed properly but upgraded my printer aswell with more features. I GOT A HARD ON WATCHING MY TEST PRINT COME SO SMOOTH.

I'm so glad I found this channel! Great info!

Thanks Bryan, I have done this on my Aquila using Alex’s latest firmware, it has worked well and my bed is now perfectly level.

Today was the day I decided to upgrade to JyerUI firmware. Your video was great it made me feel comfortable upgrading my firmware and the screen firmware. I've been running the stock frimware for last nine months. It was working good for me too. I like the new upgrade it seems to be working great. I also installed a homemade filament sensor and activate it with a new firmware. Thank you.

@BV3D

3 жыл бұрын

Hi! That's pretty awesome, especially with the homemade filament sensor! 😃

Excellent video. Answered all the questions I had before starting this process!

So glad I found you sir. Love your tutorials. Keep them coming please.

Bryan, thanks for posting your videos on KZread, always informative, and you make it easy to learn new stuff to help with running a 3d printer. I have a suggestion for a future video. It's possible to take an Ender 3 pro and convert it to using the V2 screen instead of the stock screen. One thing I haven't seen a lot of information on is the fact that if you do this you can then install and run the JyersUI firmware on it as well, providing you have a 4.2.x or newer mainboard. I decided to try the process and it was super simple to do. Doing a video for this conversion might be a good one to do to help folks out.

Great video Bryan! Very nice thing to link their Patreon page!

Yes! Been waiting for this vid!

A lot of your videos have been really helpful to me, thanks a lot!

@BV3D

2 жыл бұрын

Thank you very much, Agustín!

Hi Bryan, many, many thanks for this awesome video. I was sttruggling to get my bed leveled and almost gave up on it. It turned out that I have a bump in the middle of my bed, so until I found this video it was a matter of choosing between nice prints in the middle and not so good bed adhesion outwards or good adhesion everywhere and in the middle everything squished to the bed like crazy. (I couldn't get my products from the bed unless using brute force) Now, with the level mesh I have very nice prints all over the bed. I have ordered a BLTouch already and I wil install it, but this method already works perfectly.

Mr. Vines this video is simply one word.... AWESOME!!!!!

Just did this on both my Ender3v2s - worked perfectly! Thanks

Hi Bryan, Video as always is excellent and very easy to understand :) Keep up the good work Sir.

Very helpful and clear video. Thank you

im not the super awesome person, man, you are. Im enjoying watching these videos so much just because of you and the relaxed and friendly personality you have. The firmware is a bonus too, but you're the real treasure O:)

I was not ready for the hair. Magnificent

Great Videos you make, got it up and runing thanks 2 you it works like a charm🙂

thank you my friend I was almost a month without sleep a command line changed everything

Thank you! This is very useful.

Great and usefull instructive videos, thanks

bryan eres el mejor !! un gran abrazo desde argentina y muchas gracias por compartir tus conocimientos y con tanta buena onda. GENIO!!

took me a year to finally watch this. GOOD JOB!

Really good video! Got a new sub

The hair has it's own character xD. Very nice mane.

So I need to leave my comment and thank you Bryan for this tutorial and your video on updating the firmware to the JyersUI. Beginner's advice from my experience: The CR Touch is not such a necessary upgrade, but it helps so much ONLY when you understand how to manually level your bed, calibrate your printer and use the JyersUI features for manually trimming which are a Godsent. Thanks again Bryan!!!

@BV3D

2 жыл бұрын

Hi Angel! You are very welcome - I'm glad this helped!

Thanks so much for your explanation.

For clarification I’m trying to use the term “tramming” instead of “manual bed leveling” going forward, so you may notice that difference after Jyers UI is merged into the main fork.

@ScottLahteine

3 жыл бұрын

@@puretoronto I’m the friendly neighborhood project administrator of Marlin Firmware. But it was originally created in 2011 by Erik van der Zalm and others as a mashup of Grbl and Sprinter for Ultimaker and RepRap 3D printers.

@SoggyWaffles1984

2 жыл бұрын

I have been screaming this at almost every video I see (Out loud not online) :) Thank you

Thank you very much for this video, maybe i can finally get my first successful print :)

Awesome video thanks again!

The best video, just genius.

I am so sick of KZread unsubbing me. I've had to resub you for the third time now. 😉

@BV3D

2 жыл бұрын

Why does KZread hate me so? Haha! Thank you for continuing to resubscribe! 👍

Not quite up to the confidence of changing much on my new ender3 v2 yet but find your videos very good put mine together with your instructions and it seems to be working a treat got a few issues but I think it will be just time before I am getting to a higher level

Nicely done sir!

Thanks for the video mate.

@BV3D

3 жыл бұрын

No problem 👍

Awesome job buddy

@BV3D

2 жыл бұрын

Thanks!

You're the best man 👍

It would be cool to go over all of your upgrades on the ender v2. I love how your ender v2 looks. Thanks

Great info. Thanks...

You my friend are awesome. I watched the Jyers firmware video and got motivated to put the firmware on my printer after it has been sitting for about two months. That was easy peasy and now i feel confident in getting my bed level and getting my printer usable again. I'm no programmer and I've tried a few times to compile the Marlin from scratch but I kept getting errors and I think my VS code is set up incorrectly. Idk how that sorcery works so I gave up until your Jyers video popped up and I thought "what the hell, let's try it." Worked like a charm and my printer is currently making a mesh. Thinking of what to print my people for christmas. Thank you.

Thank You!

Hi there. Thanks a lot ! Your videos are awsome for a new guy in 3D prnting. I've finally managed to get that bed leveled correctly and it greatly improved the quality of my prints and my overall experience... Also have you ever heard of the Z axis not hitting the limit switch when homing? I need re-home it several times before it trigs the limit switch. I own a Crealty Ender 3 V2 and every other limit switch works properly for homing their axis. Thanks.

I enjoyed this video a lot! Can you explain more on setting of Z offset toward the end of this video? What value did you choose and why? Thanks!

@markalot9728

Жыл бұрын

Same, this why i watched the vid but the z set explanation was brief

Between the silicone spacers, nyloc nuts, and 5x5 manual mesh in Jyers, my leveling/tramming issues have been gone for months. Best upgrades I made on my Ender 3 v2.

G'day Bryan....i recently purchased the Micro Swiss DD and hot end combo, plus i have a 24v 50w Slice Engineering Heater cart, not knowing how to set some of the firmware i followed your intro to JyersUI now. Its got all the you need for ender 3 v2, so ive just installed the hot end and will upgrade the DD later after ive played with the hot end...cheers for your tutorials m8 from Sunny Queensland downunder!!

great video bryan

@BV3D

3 жыл бұрын

Thanks! 😀

Love the video! Celebrating my 1 month anniversary with my E3v2 and this really explains alot! I now have the 5x5HS version installed (and working correctly) and it has made a BIG difference. Thinking about dropping down to 3x3 to start printing faster. Quick question, what does the 'Viewer Asymmetric' option do and how is it enabled? Keep these awseome vids rolling and looking forward to more BV3D!

@michaellindborg1510

2 жыл бұрын

You dont have to probe the bed before each print! Just retrieve the mesh from eeprom in the start code.

Awesome videos, I'm looking to get an ender 3 v2, I got it all except the Z-offset Squish factor, how does that work?

Thx for the video =)

Your videos have been so informative and helpful. Can you do a video on the dual z-axis upgrade from creality for the v2? Are there benefits to this?

Great video

@BV3D

3 жыл бұрын

Thank you! I'm glad you enjoyed it! 😊

Thanks!

@BV3D

2 жыл бұрын

You bet! Thanks for the Super Thanks! 👍

Perfect.... Thx

Hey Bryan, I am already a follower of your channel and have learnt a lot since jumping into the 3D printing just a month ago. Let me tell you that I had been struggling to understand Manual Mesh bed leveling and your video (as usual) is the best in explaining the concepts as well as the steps needed. I just found out that JyersUI might not be a supported firmware anymore and going forward I am hearing that Mriscoc Professional is the firmware of choice for Ender 3V2. Could you please do a video showing step by step procedure on that firmware as well? Or is it going to be the same as JyersUI? Thanks and keep up the great work.

Good video that, to the point and spot on. Maybe setting up a BLtouch next please?

GREAT! thank you so mutch, super clear also for me, new to the 3d print world. Do you have collected all the settings and upgrades for the Ender 3 v2? thks

Ur the best!

Thank you. As a brand new Printer, I relied heavily on your videos to get my creality set-up this week-end. After having my BL Touch inexplicably break its probe on the side of the bed twice in my first four prints, I'm thinking of ditching it entirely and going with this firmware and leveling method instead.

I don't hardly ever move my printers once they're installed, so I have been using manual mesh levelling since it was introduced in Marlin. No need to go through the rigamarole of setting up a BLTouch or inductive probe. Like Ron Popeil says "Just set it....and forget it!"

@Jpvogel1965

2 жыл бұрын

The nice thing about a bltouch is that it easily allows you to change print beds without having to re-level. To me, that's the biggest advantage. You still want to level your bed as good as possible manually.

Many thanks for your guidance! I have installed the firmware and everything is great except after power cycle the option "Auto leveling" in UI is allways off and I'm going to switch it on every time I power up the printer. I have tried several times to store the settings and while the manual mesh settings are remembered this exact setting is allways off at power up. Do the M420 S1 option overrides this? Thanks!

Really useful tutorial for leveling and setting up Manual Mesh. One question I have is if you are using a feeler gauge instead of a piece of paper for the manual mesh setup, should you do anything different? I used one and my values were all much closer to .20 it starts you off with then what yours gets to. Also I printed the square that takes up most of the bed and it looked good at first but when trying to peel it off, all the individual diagonal strands separated. Is that because my bed is still too far from nozzle or just a byproduct of the one layer print?

Thank you ❤️👍

@BV3D

3 жыл бұрын

You're welcome 😊

Hey man I’ve got a serious issue I just added a bltouch to my e3v2 and during mesh it goes to the middle of the build plate ( facing the printer right middle section) and it’s only probing the part as it’s supposed to be probing across the mid section and starts hitting its limits opposite of the end stop is there a fix for this?

Hi Bryan- thanks for your vids! Did you tried the v2.4.7 board with the Touch screen and what is your take on it?

Question : so just add that m420 code, and no need to tick "enable mesh leveling" option before print? I've used mesh leveling before but didn't add any M commands in slicer, I kept going to level> tick the mesh leveling enable then print. Hmmm...

Hey my printer is not probing all spots . It will properly probe the first row spots of the 3x3 or 5x5 and when proceeding to next row it stick at on spot and start jamming up have you heard of this and is there a fix?

Hello Bryan, Thank you for such a informative video. I have just purchased a Ender 3 V2 and first attempt ended with filament all over nozzel and threading all over the item I was printing One thing I am not clear on with the levelling with the bltouch. Do you set the bed at fully tightened or loose?

Hello did you take out the E3V2- Default version 3x3-4.2.2 out before you installed the new E3V2 manual mesh 3x3 4.2.2?

Thanks for explanation Bryan! Can you make a sumarry of possible bed leveling methodes for the Ender 3V2? I´m using a BL Touch and I´m happy with it. Are there pros and cons for all the bed leveling methodes?

Hi Bryan- thanks for your vids! I've had a ender 3 v2 for a few weeks now, and with your help I have the jyers firmware/UI and everything is mostly working fantastic. I've done both manual and mesh leveling. Some of the more intricate things I try to print like things with gears, etc are still failing due to bottom layer squish / elephant foot / binding. Have you done any videos that address this? Also, it would be awesome if you could further explain the Z offset towards the end of the video. Do you check/change this offset on every print? Does it need to be set back to 0.00 if you want to manually tweak the mesh levels, etc? Everything else in the video made perfect sense to me except for that little bit on the z-offset! Thanks again!!

@jenswarth1672

2 жыл бұрын

same here - awesome video but did not unterstand how Z offset works and why it has to be done at all...

@jakewill8702

2 жыл бұрын

@@jenswarth1672 anyone knows anytihng more about the z offset

@user-ne6ej4wd7l

2 жыл бұрын

The Z offset adjustment is used to 'offset' the thickness of the paper used when the bed was levelled.

@siljeberg

2 жыл бұрын

​@@jakewill8702 The z-offset moves the nozzle closer or further from the bed. When you are doing your first test you finetune that distance with z-offset to get optimal bed-nozzle distance.

@siljeberg

2 жыл бұрын

@@jenswarth1672 It's not a necessity to do if you get it perfect. You just use it to adjust the bed nozzle distance if you feel you're to close/far. When i did this i was too close so i had to adjust like 0.4

Great Video i was actually waiting for the video but since learnt to do it myself its great to know i was right on target as a noob ;) But can you show the process before this one ? placement of the Z axis switch knob height for beginners ?

@patrickle1

2 жыл бұрын

As a noob I struggled with that as well! I even damaged my PEI as I was setting the Z-axis and then creating the mesh which now I know isn't the correct process :-(

Just noticed that the BLTouch can be used by Jyers for the manual bed leveling! No need for sliding the paper around anymore

@KingNothing22

2 жыл бұрын

you still need to manually level the bed first

@michaellindborg1510

2 жыл бұрын

@@KingNothing22 yes, but you use the BlTouch to do the manual bedleveling, instead of using the paper or Post-it. That was my point. The BLTouch probes the corners and guide you to turn the levelings knobs up or down.

Can you use JyersUI on the ender 3S1? I’m having major issues getting my bed level to get clean prints. There seems to be high and low spots and I when I attempt to fix it using the octoprint bed visualizer when I add tape to raise a low spot it seems to be doing the opposite according to a re bed visual. I’m curious to try the med leveling

How can be z-offset negative? as wie have a z-axis motor stop by 0.0z ? I just don't get it. Before we begin with manual mesh levelling, we adjust the bed. Tis is already 0.0. The values below 0 would scratch the bed, or I don't get it correctly?

This video helped my first layer tremendously after manually setting the Z offset for each point. Any chance you might know why the fan settings I have set in the creality slicer are ignored when going to print? I have my initial fan speed at 5% with regular at 90 but they never turn on automatically.

Hi Bryan, Great info in this video. I have tried this and then when my Ender3v2 (with a BL Touch fitted) goes and does a print there is a total difference... I am guessing the BL Touch overrides the new mesh saved and stuffs it all up.. how do I fix this please?

will this work for the standard ender 3 with a 4.2.7 board or is the new display of the v2 a must have... or could you get away with messing with the firmware and changing the display type back to the standard ender 3 model?

Hello. Congratulations very good video. One doubt. I have saw that my ender 3 is slow down Z changes when auto-leveling is active (after create manual mesh. My ender hasn't BLTouch) is it normal functionality or maybe is a trouble with the firmware? Thanks. I have JyersUI 1.3.5 with 4.2.7 board and Manual Mesh version (without BLTouch)

I just did the Jyers update. In my start-up commands I had a pause to allow me to tweak the Z offset before printing the job. After installing Jyers, these commands now result in the Z axis moving up and asking whether or not I want to purge more material. When I remove those commands from start-up, it executes fine. Any idea what's happening? I'd like to be able to use those pause commands with Jyers.

I added the line "M420 S1 ; Enable mesh stored in EEPROM" after the line "G28 Z0". but right after the new line i added i have this: " G29 ; initiate z-probing " , does it need to be deleted? it looks like the 9 point z probing it does before each print, I'm just worried that this will override the mesh, am i really off base here?