The use of the T track is ingenious. I’m not into woodworking so I’ve not heard of it . Definitely a future mod for my pelican . Thanks for sharing.

@jeffakamax

Жыл бұрын

Highly recommended, they work great!

I'm Impressed . You did a great job fabricating everything . I'm getting one soon , I think I'll keep the trim on and just seal at the joints top and bottom . Love the Flag ! Thanks

Great video! Thank you for sharing. I just bought a brand new Pelican bass raider10E from Cabela's. I have a lot of great things in the making for it but great to see others projects! Cheers!

The BEST small boat mid video yet. Great logic, design and craftsmanship!

@jeffakamax

7 ай бұрын

Thanks!

Nice setup! It’s clean, great job I threw a casting deck on mine, these little boats are great.

Some great ideas. Thank you for sharing. Especially about the black trim.

Really like what you have done to your boat! We are using a lot of your ideas. Thanks for making your video.

@maryandersen3172

Жыл бұрын

By the way I just bought my boat NEW paid 1,100.00 for it at bass pro😫

@jeffakamax

Жыл бұрын

@@maryandersen3172 you'll enjoy it, they are great little boats.

I'd love one of the transceiver mounts. Very creative. 🙌🙌

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com I'll hook you up

Nice setup.

Nice job, my friend. I love mine. Thanks🙏🏿🇺🇸

Love the usage of 3D printing! What filament do you use? I know PLA isn't great with heat or water, I've used PETG with some success but found it can warp under high heat. I'd love to avoid using ABS but it might be the only filament appropriate for outdoor use that's exposed to water.

@jeffakamax

Жыл бұрын

I use PETG for the clamps and transducer mounts. Been using PLA+ with great success underwater. In some instances I've had better luck with PLA+ as it seems less brittle but less temp resistant.

Hello Jeff love everything you did with the bass raider how I'm very interested in the cart you built to move it around

I love your 3d printed pole holders! Did you make the file?

Great video, an thank you for that. I did buy one today at academy sports, $749.00 Not bad. So it's still in the back of my truck, and I will be working on it today, and tomorrow. thanks guys/girls. have a great one

@jeffakamax

Жыл бұрын

You will love it, they are a blast!

Great mods! What type of screws did you use to install those tracks? Are they stainless?

@jeffakamax

Жыл бұрын

Yeah, stainless screws and VHB tape

Hi Jeff, I love the mods you made to your boat! I have the same exact boat and I was wondering how you re-ran the wires through the hull? Did you just tie the new ones to the factory ones and simply pull them through? Also, is there any advantage to using 6 guage wire vs. the 8? Thanks.

@jeffakamax

Жыл бұрын

Yeah, I just tied the new ones in and dragged them through. 6ga is whats needed for 50 to 60 amps. If you are running a smaller motor you will probably be fine but I have a 65 and 55lb thrust I run on mine.

@paulbernardi2597

Жыл бұрын

@@jeffakamax Thanks for the reply Jeff. I thought the factory wires were kind of on the light side myself. I'm running a 55 lb. Minnkota so I think I'm going to do the same thing you did! I really like the Anderson plugs too I just have some basic 8-10 guage solderless connectors but one actually pulled out this weekend on me.

@jeffakamax

Жыл бұрын

@@paulbernardi2597 anderson connectors and some 6ga wire and you'll never have to worry about it.

Great video Jeff. How did you hook up the shock chords used in the trac? Are they pre built?

@jeffakamax

4 ай бұрын

No I just made them up with an eyelet on each end and mounted to the track with a t stud and nut

Jeff, would you be willing to share your guide files for your mods? Transducer holder, clamps and rod holders all look great!

Wow that’s some very cool upgrades, I just sent you an email.

Thank you for sharing, just curious i know you said you would 3d print the attachments for the transducer? but what about the sun sharde for the striker four, i let a buddy go out on my kayak and he knocked it off with the paddle :(

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com and I will print you one up

Can you make a video explaining the rewire? I just bought my first boat and want it wired this way

nice mods, just curious which ones you would do again or not after using the boat for a year. also, what about the pelican seat over the cushioned one? thanks for the vid

@jeffakamax

3 ай бұрын

If I were to build another one, there isn't much I'd change. I surely wouldn't use the plastic scupper plug again - lol. the Ergo 360 seats are much lighter and are mesh with breathe much better than a padded seat. No swamp-ass!

Outstanding, I'll be watching! How did you bond the lattice to the hull?

@jeffakamax

Жыл бұрын

3M VHB tape

Excellent video and suggestions ...but no need to go to 6 gauge wire for this application.

@jeffakamax

Жыл бұрын

Oem wiring claimed to be 8ga but looked more like 10ga. 60amps through 10 feet is borderline. I had some 6ga laying around anyway.

Wow this thing is Sweet! Where can I order one haha

How has the aquarium sealant held up. Thinking of doing the same to my angler 8s. Not sure what to use. I've seen people use flex seal and bed liner. Then I saw your video.

@jeffakamax

Жыл бұрын

Flex seal is a joke. The RTV has held up well! (Aquarium sealant)

@RWS73

Жыл бұрын

@@jeffakamax Thanks!

Need some rod holders to

I’d love some of those 3d print fittings

@jeffakamax

9 ай бұрын

You got it. Email me st jeffakamax@gmail.com

I wish I had gotten this information about the Rubber seal before I took the one off my pond prowler, oh my gosh, same thing happened to me I had to stretch that thing

What 3d printer do you own and would recommend. Do you have a link and also when i get mine would you be willing to send me the files for it. These are some of the greatest mods i have seen. Thanks. Also what size drain plugs and size holes did you install in the bottom. Do you have a link to them please

@jeffakamax

6 ай бұрын

Whats your budget for a printer? Check k my other videos for info on drain plus and supper plug.

@WiztekServices

6 ай бұрын

500 or less

@jeffakamax

6 ай бұрын

@@WiztekServices creality K1 or bambu p1p if you have a little more to spend.

@WiztekServices

6 ай бұрын

@jeffakamax thanks it looks like the bambu p1p is better so i will order that one and thank you

Can you add the link for the rod holders and transducer holders?

What size T track did you use? Does it work with RAILBLAZA EXPANDA Track Low Profile Kayak Accessories Mount Track

@jeffakamax

Жыл бұрын

Just basic T track. www.amazon.com/gp/product/B07ZV5R6CP/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&th=1

Hey Jeff. Where did you get your foam mat from?

@jeffakamax

Жыл бұрын

Was some old cord raceway I had laying around

Hey Jeff, what did you use to apply the lattice? what adhesive?

@jeffakamax

Жыл бұрын

Scotch-Mount Extreme Double sided tape. Same as 3M VHB but cheaper

@clintoncheetah7426

Жыл бұрын

thank you!

At the bow, what size schedule 40 PVC did you use for rod holders ? I bought 1&1/4 inch PVC but it doesn’t quite fit in the straps. My Bass Raider is new and the straps are quite stiff. Thanks in advance. Steve B.

@jeffakamax

Жыл бұрын

If memory serves, it was 1 1/4. A little heat from a heat gun or hair dryer will soften things up just a bit if needed.

@steveb.1701

Жыл бұрын

Thanks so much for the suggestion. Before I forget, I was about to put in an Atwood scupper plug when I came across your video. How did you go about fixing the problem? If you had to do it 5:34 over, would you still go with a scupper plug? Thanks a million for getting back to me. I really enjoy the ideas you come up with.

@jeffakamax

Жыл бұрын

@@steveb.1701 I replaced it with a stainless steel supper, no problems after that

@steveb.1701

Жыл бұрын

Smart. Thanks.

@steveb.1701

Жыл бұрын

Jeff: Would you mind posting the link to the stainless steel scupper assembly?

Hey Jeff really like your setup. Just got my bass raider and in process of setup. looked at a lot of different mods. I like your t track and the 3D parts. I would like to get those 3D mounts you made. let me know how to get my address to you. Thanks.

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com

I would like the 3 D transducer mount you have. Is that still possible?

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com

Does anyone have the stereo foam layout for one of these boats?

Love your mod!!! I would really love a 3D clamp and arm if you don’t mind? I would even pay for it 😊

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com and I'll hook you up

What was the length of the trolling motor. I think you said it was a water snake. Who makes it? Thanks.

@jeffakamax

Жыл бұрын

www.amazon.com/gp/product/B007SXHKFU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Have NO complaints on that motor at all! I cut the shaft down so it's shorter than usual. I like to be able to cast over it without it being in the way. Personal preference really. I also have a 65LB Haswing that is ESC controlled. Works great too but not good at FWD/REV prop cleaning to remove weeds.

any way you can provide the .stl files? I would love to print some of your mods.

Jeff in the beginning you said your battery was a 1000-amp hour battery, did you mean 100 amp hours? thank you kindly.

@jeffakamax

Жыл бұрын

YES! 1000aH would need a bigger boat...lol

How did you replace the original wiring? I just purchased the Pelican Bass Raider 10 e.

@jeffakamax

Жыл бұрын

I tied off the new 6ga wiring to the existing OEM wire and used that to pull it through.

@Fishin_From_The_Boat_804

Жыл бұрын

@@jeffakamax thanks

What size clamps did you use for your rod holders?

@jeffakamax

Жыл бұрын

2.5" if memory serves

Yes where did you get the rubber mat for the floor of the pelican

@jeffakamax

Жыл бұрын

Was some wire raceway I had laying around. Just an industrial version of an anti fatigue mat.

Where did you order the tape from that you put under your t track

@jeffakamax

4 ай бұрын

Amazon. Scotch-Mount Double Sided Mounting Tape Heavy Duty, Black Extreme Mounting Tape

I need one of them mounting just got me a pelican bass raider I’m a beginner angler and need some tips lol

Where did you get the track/screw/tape from?

@jeffakamax

Жыл бұрын

www.amazon.com/gp/product/B07ZV5R6CP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B07YFNT3RY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B00FUEN2GK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 here you go!

What did ya adhere the pvc strips on the bottom with

@jeffakamax

Жыл бұрын

The scotch version of 3m VHB

what did you use as a glue keel guards ?

@jeffakamax

Жыл бұрын

3m VHB tape

Hi Jeff...I would love to get the arm and clamp/mount as well. How do I get you to send to me?

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com

How long can you run your trolling motor on your lithium battery?

@jeffakamax

Жыл бұрын

If I'm out for 4 to 6 hours, I rarely use more than 40%

Hey I'd like u to print up the transducer pole clamps and transducer mont if u can

@jeffakamax

Жыл бұрын

email me at jeffakamax@gmail.com

Navigation, anchor and running lights!

can you add the link for the Transducer and other items? i have a 3d print farm. Thanks

@jeffakamax

Жыл бұрын

I'll send you the file.

@cdub806

Жыл бұрын

Jeff, fantastic build, I would appreciate the link as well.

Could I get the STL files for the build?

Do you have links for the rails that are on the boat and I’d like a transducer arm

@jeffakamax

11 ай бұрын

www.amazon.com/gp/product/B07ZV5R6CP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

@jeffakamax

11 ай бұрын

Email me at jeffakamax@gmail.com for parts

I'm steealing your t track idea. Any advice on where I could find a paddle bracket like that? Not having any luck.

@jeffakamax

3 ай бұрын

Steal away! Got mine from amazon... search. Kayak Paddle Holder Clips(Including Screws),Deck Mounted Universal Kayak Paddle Clip & Fishing Net Clip

@EricScherrer

3 ай бұрын

@@jeffakamaxsorry, I meant the metal bracket.

@jeffakamax

3 ай бұрын

@@EricScherrer the bracket that mounts the paddle clip for the T track? Just something I bent up myself.

@EricScherrer

3 ай бұрын

@@jeffakamaxI'll probably have to do the same. It usually comes out pretty bad when I do.

Great video. You are right these boats are hard to find. Think you can 3d print me one?

@jeffakamax

2 ай бұрын

Sure can. Email me at jeffakamax@gmail.com

@jeffakamax

2 ай бұрын

I forget the manufacturer, but there is a company 3D printing entire boats!

Would like to purchase the 3D parts for the transducer if available..

@jeffakamax

11 ай бұрын

Email me at jeffakamax@gmail.com

How did you glue the pvc strips on the bottom

@jeffakamax

10 сағат бұрын

@@robertnaughton5417 I used 3m vht

Hi! I would love a 3D print of your version Scotty arm!

@jeffakamax

Жыл бұрын

The arm is just pvc. Do you need the clamp and mount?

Hello, would you mind making me a 3D print of the transducer mount that you had in the video?

@jeffakamax

Жыл бұрын

The adaptor for transducer to pvc?

@tomspitzer8346

Жыл бұрын

I would need the clamps and the part for the transducer. That setup is extremely nice that you did.

@jeffakamax

Жыл бұрын

@@tomspitzer8346 I'll print up a set and contact you for shipping info.

@tomspitzer8346

Жыл бұрын

Sounds great! Thank you. What did you use to get the clamps to stay in the tracks?

@jeffakamax

Жыл бұрын

@@tomspitzer8346 www.amazon.com/gp/product/B07GS3YS9R/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

What sizes are your t tracks??

@jeffakamax

10 ай бұрын

I bought 4 foot lengths and cut them accordingly.

@slliks67

10 ай бұрын

@@jeffakamax Thanks i want to do this to my quest angler 10

lets seee more on this 1000 ah battery please

@jeffakamax

2 ай бұрын

I have a few eco-worthy 100ah batteries. Going on their 3rd season in 3 different boats.

I sent you a email bud. Im interested in those transducer clamps

Id like a set of the clamps and adapter..sent you email thanks

What size screws did you use to attach the T tracks?

@jeffakamax

Жыл бұрын

#7 5/8" stainless wood screws