Peavey XR8600, XR8300 - 1200 Watt Class D Powered 9 Channel Mixer
Музыка
Peavey XR8600, XR8300
They feature new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System).
Audio Savings 2012
Пікірлер: 32
Thanks for the video, Bill
It was fixed by the warranty . It is a great powered mixer for small gigs . I sold it a few months ago . I'm using powered speakers now
hola GREG HELM me gustaria muchisimo que tuvieras un video donde explicarias las bondades de este hermoso aparato pero en español o la traduccion. UN MILLON DE GRACIAS. SALUDOS DESDE PERU.
Great video, thanks for this. My question is how many monitors can I gang in on this head? I was told only two but I wondered if I could connect 4 passive monitors in series?
looks like a mighty fine product to me.. loaded with wonderful features. Love the graphic with feedback indication ! and wow 600 a side..really? that's pretty good!!
This mixer/amp was in a location that needs a feed for video. I pulled the rca out but the signal is too hot. Is there no control over that output? thanks
With the XR8600 would i be able to connect 4 300w speakers to the amp directly? Am i correct in assuming that the 600w per channel is allocated Amp 1 600w & Amp 2 600w, since amp 1 and amp 2 has two connectors each is it equivilent to 300w per connector?
Microphones to amplifiers used for Paevey XR8600. Why would I use a 3.5mm mic plug into trouble without? Please guide me, I thank you much.
I would think the XR8600D model is lighter than the XR8600 because it employs a switch mode power supply. The XR8600 uses the much heavier toroidal power transformer...
Can you use the two amps for right and left, then use another outside Monitor power head for your monitors? I was thinking you could use one amp for the mains, the other amp for subwoofers and run an outside Monitor head coming out of the "MOnitor" Jack in the front... Anyway of doing this?
@glanemann
8 жыл бұрын
+Jack Shaw That is what I do. I run one speaker each amp, then use a balanced cable from the monitor out to a powered floor monitor.
is this thing better than a bose sound system
can you work powered active speakers of this or do they have to be passive speakers
@furiousgeorge00
6 жыл бұрын
Outputs on the back are for passive speakers. The front of the 8600 has a "line out" which you could run to an additional powered speaker or a second amplifier's input.
Also, could you explain all the 1/4" Jack inputs and out on the bottom right? Thx
@terrywilson4118
4 жыл бұрын
From left to right you have 5x 1/4'' jacks and 2 RCA jacks.... J1 is the effects on/off defeat jack for a remote plug in footswitch, J2 is a line level post EQ monitor mix output to an external amplifier etc, J3 is the same as J2 but for main front of house mix @line level output, J4 & J5 are direct line level inputs to the 2 internal power amplifiers.. The RCA jacks line level outputs to a recording device such as a tape deck or DAT recorder etc...
mine has a sound problem. all turns on ok, but no sound at all.... help?
I'm not getting any sound from my speakers using my peavey xr86000 I've checked all cables and connections all led lights are functioning
@rongus2299
4 жыл бұрын
I'm having that now... Lights on I can see sig/ clip lighting up for each channel just no sound... It was working for 15 mins then just stopped... Had it 2 years.
@roboexp16
3 жыл бұрын
I had this problem then was fixed by warranty. Now years later it has happened again and no idea why. Any luck with finding a solution?
what's wrong with it today?
I just picked one of these, and it is REALLY HEAVY!!!! it's not lite. Why?
@moggiee1
4 жыл бұрын
You must have the analogue version - much heavier!
Please can you give the description in Spanish ?
i bought mine on 5/10 /10 used it for a lot of gigs . today it's not doing well ......... 2 days after the 2 yr warranty is up , not happy at all ..........
How would this when I want to send to subs?
@terrywilson4118
4 жыл бұрын
If you are using active powered subswoofer cabs, you connect to the MAIN 1/4'' main mix output jack...
@kennyplay5982
4 жыл бұрын
@@terrywilson4118 ok. I see that there isn't a volume that gets sent to the sub, so it's a guessing game to get the right volume. Thanks
I just bought a used one xr8600. It is 42 pounds!!!
@terrywilson4118
4 жыл бұрын
Yes, The XR8600 is heavier than the XR8600D models
please put subtitles in Spanish because I have an old peavey amp and used that brought me to my house and need to know how it works because the focus of power and turn not on, by the way the team that I have is the same that is in the video. ....