Get the amp here*: amzn.to/4ctb3uQ Or watch this video: kzread.info/dash/bejne/mauklsF6qa_Qe5M.htmlsi=TiUehiJeR5ZV2SF5

Been waiting for this lets see the results!

Always enjoy the "Do They Make Rated Power?" videos.

@DIYAudioGuy

Ай бұрын

Yes, they're a lot more fun when they actually make rated power.

@danrussell9357

Ай бұрын

@@DIYAudioGuy This one would be pretty close if there was 14.4v constant power and 1Ω steady resistance. I like how they gave it a specific number instead of just the general 1,500w. You would have a lot less content if you only posted videos of amps that made stated power ratings : ) Thanks Again

Without even looking at the internals I would guess this is an off the shelf, older design, clone, class D amp that Hyanka put their name on. I do like the extra adhesive on the top of the transformers and inductor. Unfortunately, it doesn't look like there's much adhesive on the bottom to actually hold them to the board. I definitely don't like those thick bars pressing the FETs against the heat sink. It would be very difficult to get even pressure on all of them. Maybe if they had something soft and spongy to press against them they would get even pressure, but I don't see that. More than likely there is a few sets that have very little pressure on them and they are likely to run hotter than the rest. When the amplifier is pushed hard those are going to be the ones most likely to fail due to overheating. Wait a minute, it looks like those FETs don't have normal thermal grease under them. That looks like RTV type thermal compound. They are glued into place. That is not good. Eh, it's probably fine as long as you don't wire it low or beat on it too much. It does not inspire confidence.

@DIYAudioGuy

Ай бұрын

Thanks for the info.

Rated power output is usually recorded at 14.4v but it can vary between brands. I know many Taramps amps only require 12.6v to achieve rating in most cases, but many more brands will do rating at 14v+

@DIYAudioGuy

Ай бұрын

No doubt I could get more power out of an amp if I had a better set up on my test bench. But I don't test enough amplifiers to really justify spending more money on a bigger setup.

@Special.Purpose.Weapon

Ай бұрын

​@@DIYAudioGuy Beer !!!! 😂

@DIYAudioGuy

Ай бұрын

@@Special.Purpose.Weapon Ha! That was an odd typo. I could definitely use a better beer setup!

@soldjahboy

Ай бұрын

@@DIYAudioGuy I feel you. I think what you have going is more than respectable and does a pretty good job of giving a more real-world result I think. Not many people can maintain over 14v in their vehicle anyway, unless you're stacked with high output alternators and enormous battery banks most of us DIY car audio hobbyists will often be sitting in that 13v zone :D

@DIYAudioGuy

Ай бұрын

@@soldjahboy The ECU in my truck controls the voltage. It is rare to see anything above 14 unless it is a cold day. So I get what you are saying.

How to pronounce Hyanka is like the debate everyone had about what is the plural of Prius 😆😆

@DIYAudioGuy

Ай бұрын

🤣

Williston audio Labs Big d would love this amp if it had Tiffany style RCA's😅😅😅😅😅😅

@DIYAudioGuy

Ай бұрын

🤣

knew those internals seemed family and well, they are very common. my hollywood excursion (german brand) hxa 3k, rated for 1,8k (did alleged 2,35k on their amm-1) also has very similar internals

3:01 Yep! I have a friend that he would never admit that he is wrong. I was explaining the exact same thing about her DS18 monoblock and that day was the first time I heard someone say "Maybe it's a dual block instead of a mono block" guess who dipped out of helping to install the sound system...yep, me.

tks for a reactive load dyno are nice but in real time great tks for your time

I like those style slanted deep inputs when you get the wire in there it really really holds plus more surface area for contact with the wire which really don't matter on such a small amp but on much larger amps it can help

@DIYAudioGuy

Ай бұрын

These were much deeper than any I've ever used.

Skar rp1200 vibes

@DIYAudioGuy

Ай бұрын

Yep.

@JasonWW2000

Ай бұрын

Do you mean the rectangular shape and black color? Other than that, they are completely different. How are they similar? Similar power?

1500 watts MAX POWERRR

i got this amp to 1600 watts on my subs .5 ohms rose to 1.6 i made a video on it. in real time car testing

@bretk7916

27 күн бұрын

How do we find your Channel

It looks pretty solid looking at the amp guts...shame it dodnt meet power.

@DIYAudioGuy

Ай бұрын

To be fair, I don't have enough capacity on my test bench. Body

It’s a decent sub amp but the Recoil RED1200.1 for $125 on Amazon is a smarter choice

For the amp specialists, it would be good to know the model of all of the mosfets on the side of the heatsink.

@DIYAudioGuy

Ай бұрын

I did not see any model numbers on them, I'm assuming I've got to take part of the amp apart to get to them?

@JasonWW2000

Ай бұрын

​​​@@DIYAudioGuyYeah, you'd have to remove the end caps, them remove those silver side pieces on the exterior of the heat sink and then undo the screws that pull on the thick metal plates. I'm not sure it would be worth the effort.

@LatvianVideo

Ай бұрын

@@DIYAudioGuy gotta take off the bracket which presses them to the heatsink, then the model should be visible

@Carl_Jr

Ай бұрын

​@@LatvianVideo Or, you could contact the manufacturer and ask them. 👍

looks like it might be a decent budget amp.

@DIYAudioGuy

Ай бұрын

That's what I thought. Plus there are a ton of brands out there that seem to do well in the marketplace even though everyone knows that they don't quite do their rated power.

Very close to Skar RP1500

@DIYAudioGuy

Ай бұрын

Another cookie-cutter amp.

@rolandomota7474

Ай бұрын

​@@DIYAudioGuy That means good or bad?

@DIYAudioGuy

Ай бұрын

@@rolandomota7474 neither.

Looks like audiopipe

@DIYAudioGuy

Ай бұрын

Probably an off-the-shelf design.

1500 watts of unqualified gæ