Props for useing the original mounting clips off the stock radio

You fast forward through the most important part (the wiring) 👏

Hi. Thanks for the video. I have that same model truck replacing my dash pad and decided to remove and paint my interior panels. Also decided to do my headliner as well. It was sagging. I then decided to upgrade my radio and speakers. I was giving an Q-Bomb 12" subs for a 2009 Dodge Ram 1500. Really dont fit my Chevy but i will make it work. I dont use my back seats anyway. You were very helpful. Kenwood 2din you have an new home. I brought the Wire kits RAP-GM-4001. and you will need an GM-6 or BAA4 Antenna Adopter.

Good job. You love the word "basically"!

It helps to when pull the steering wheel down all the way as far as I'll go

Good job. Thanks for the info!

Where did you get the dash cap? My original one is nearly gone, currently using a carpet type cover.

Hi, super job. Will you do a "flashing security light" fix how to video soon?

A metra harness adapter would be a better idea instead of splicing into the factory harness, keeps you from potentially damaging any of the wires in the factory harness. It’s like $5, and as a bonus you can wire the whole thing on the bench using a pinout, and connect and secure wires with solder and heat shrink. I like what you did with modifying the bezel, how’s the job holding up after a few years on?

Hey Scott where is the Internal amp for the truck stereo?

The radio on my truck is like a demo one they used at walmart so it displays all that stuff😂

@stangordycustomknives1068

3 жыл бұрын

they all do that, you can go into the settings and turn off demo mode.

@capnjack2454

3 жыл бұрын

@@stangordycustomknives1068 I thought someone just stole the demo one from walmart

Would t it had been easier just to buy the double den dash and install it with the way u fixed to stereo?

I need help with my wires if you could send a picture of the wires you had hooked up so I can see

What stereo is this?

Where can I find those blue wire connectors so I won't cut them off from the original??

@ScottsGarage17

6 жыл бұрын

You can get those in the electrical sections of Lowes or Home Depot.

Lol "BJ weld"

@articat568

4 жыл бұрын

Jeff Robinson was thinking the same thing😂

You can bring the steering wheel down some more that will help

Mines stays with time on and black screen and drains my battery anything I can do ?

@bigabescanal2799

5 жыл бұрын

The wiring was not done correctly. Tye ignition wire is probably hooked up to the constant 12volt wire instead of the ignition wire. Not sure what color the wire is. Do some research on it.

What is the make of the radio

@silentbravo

6 жыл бұрын

7 Inch Double Din Touch Screen model 7010B, found on amazon at www.amazon.com/Double-Screen-Receiver-Bluetooth-Support/dp/B01IEV4C7I

Hey so you live in phoenix i live in phoenix and in sure you like money like every one else..... Can i pay you to do it? Like on a saturday you have free. If not cool and love the content great vid

He said BJ Weld (10:31) LOL

My dumb self went to walmart and got a dremel and sanding sponges. Ill be adjusting the plastic for a good fit. Guess what I forgot? Electrical tape and wire strippers to actually install the radio itself .-. Stores are closed today since its thanksgiving. Cant go out tomorrow because it will be black friday. I have to wait until Saturday. Update: So I was able to get it done after a month of fighting with the radio. I didn't measure properly and my radio wasnt wide enough. Got it settled properly. All was well. Key word *was* Guess when my dumb ass is doing this Thanksgiving? Starting again with another 00 GMC Sierra because mine got totaled by my idiot uncle. Gotta get another radio too. Insurance company wont let me take mine because it "affects the value". Fun. Well, this time I'm going to update the speakers and put in subwoofers. I'm not messing around this time!

@yuron8210

5 жыл бұрын

cool blog bro

What size is the screen

They sell the double din dash kit now. Lol

Dude a wiring harness and a bezel from an 03 and newer fits a double din stereo

@dickmick5517

5 жыл бұрын

Might fit the radio but the heater controls are not the same.

This explains why you can't buy a double din conversion kit (I have looked). The factory unit is Din and 1/2. You can just buy a conversion kit that creates a little storage space below the receiver and install a single din receiver. They make them with video screens that retract into the receiver. You can buy a new bezel for double din receivers but they cost around 150 dollars.

@morbjrn5265

5 жыл бұрын

The only ones I can find was $300

@Mark0003260

5 жыл бұрын

@@morbjrn5265 You can find single din receivers with DVD player, GPS and rear view camera for about 160 on Ebay. Of course, they are Chinese and not name brand.

@Mark0003260

5 жыл бұрын

@@morbjrn5265 You can find a kit on Ebay or Amazon for 200 that contains a wiring harness, new bezel, double din bracket, and antenna conversion. You can also buy a used bezel and buy the double din bracket for 20 bucks.

@morbjrn5265

5 жыл бұрын

@@Mark0003260 I go through crutchfield. They dropped the price. I don't trust ebay or amazon when it comes to stuff like that. Well I dont trust Ebay in general. Crutchfield never let me down before.

@Mark0003260

5 жыл бұрын

@@morbjrn5265 I used to use them exclusively but they aren't cheap so I thought I would give this Chinese one a try.

Who can guess who this guy sounds like?

@hemi5.7awdpursuit5

4 жыл бұрын

No

@coalovd7761

4 жыл бұрын

1994/1989 Chevy Silverado 4x4 Me I can’t ( ͡° ͜ʖ ͡°)

4:32

Everything always gotta be so difficult with gm fuck

You didn’t show us how to hook it up right & you didn’t show us how to wire the power cord plug.

What u didn't show us how to hook up the power, that's the trouble I'm having right now ,please send me something on the power hook up, I have a yukon same scenario, same stereo and all ,why did u skip that important part ,exspecialy for that install ,I watched the whole damn video and u left it out ,wtf