Bodyman and painter here- also raced/maintained sprint cars for 25 years. Not many people can do basically everything to restore a $200-300k car. I am extremely impressed with this guy!

As a retired 4X ASE Master Technician, I really appreciate the research that you had to do in order to ensure that you were using factory techniques to replicate the look. It shows your enthusiasm to be the best restorer you can be. Well done!

Great series! The good things are: I am learning a lot. Interesting commentary. And no distracting background music! No bad things.

A masterclass on how you do it correctly. He is an absolute artist at the height of his craft. Anyone who restores mustangs or Shelbys should watch this series.

This guy is just AMAZING......what a craftsman.....i'm hooked on this restoration, Jerry. Great work

@thewriter2549

9 ай бұрын

Appreciate your comment and agree.

@puttervids472

8 ай бұрын

⁠@@thewriter2549is the red oxide ppg dp74 ? Looks close if not. Dp74 is the original stuff. Haven’t bought any in 3/4 years. Since I shot the last underside , which was a 68 Dearborn car , wouldn’t shock me if they stop making it. It’s the best there is.

@robertrobecki3425

7 ай бұрын

Niesamowity? 😆😆😆 Niesamowite smarowanie uszczelniaczem na gołe blachy i to palcem 😆😆😆. Wyczyszczone, wyspawane blachy zabezpieczasz wpierw podkładem epoxy. Później uszczelniasz złącza, spawy, zakładki blach. Konserwujesz podłogę, wnęki kół, slody progów, wnętrza tylnych błotników. Na to dajesz podkład albo tlenkowy, albo akrylowy, a na to lakier. Profile zamknięte i wnętrza progów zapsikujesz woskiem do profili zamkniętych. Wtedy masz zabezpieczone i wilgoć do blach nie dojdzie.

@puttervids472

7 ай бұрын

@@robertrobecki3425 fo shizzle my nizzle. 😬.

@josemmariscal9943

7 ай бұрын

L

This man is such a perfectionist and the knowledge he possesses is amazing. That Shelby is going to look even better than the factory build.

What a craftsman. I can’t wait to see it up close and personal.

Dang Jerry this is just fascinating to see and watch how he explained every single action he takes to seal this Shelby. And listing to him refer to the word "Concourse" has got to be music to your ears haha! Thank you for sharing this experience with your subscribers it's quite an honor actually.

@thewriter2549

9 ай бұрын

Thanks for taking your time and kind words.

This guy is doing a great job, he explains why he is doing it the way that does. I am about at the same point in restoring my 67 Shelby. We changed the way we were doing some of the work to the way he does it. Thanks again for another great video.

@thewriter2549

9 ай бұрын

That is good to hear. Thanks for your comment. We'd like to hear more about your Shelby like color and how it is equipped.

This is Jedi level knowledge of the Shelby. Just incredible

As great as this video series is so far, I absolutely cannot wait to see the finished product. Thanks to guys like him restoring the classics!!!! The attention to detail is phenomenal and well deserved.

@thewriter2549

9 ай бұрын

When finished, we want to show Jason driving the car, initially, as he gets it running, followed by the brothers that sold me the car, and Dan Bailey, that found the car.

What a lucky man you are Jerry to have such a craftsman restoring your car. Just phenomenal work!

@thewriter2549

7 ай бұрын

Yes, without which I wouldn't have bought the Shelby because I could not have gotten it restored.

I wish there were more videos of this guy...these videos of him, just the last 4, have answered over a dozen questions I have on my mustang restoration.

@thewriter2549

7 ай бұрын

I have been thinking about making part 5 and on as subscription only for maybe 5 bucks per month and add one part per month. Views are much lower on tech articles, so I lose money doing this work - expenses exceed income here. Each segment is long and takes over 100 hours to edit. Part 4 took 3 weeks and 130 or so hours to edit. I won't sacrifice quality for speed. What do you think? Would you subscribe?

Jerry, it's been a pleasure so far, watching your baby come to life. Looking forward to seeing her finished. You have an excellent set of hands & eyes, doin your ol girl justice.

@thewriter2549

8 ай бұрын

Yes, and bringing back this car made me want to find another one to bring back. I didn't think it would be so fun.

@eddybear771

8 ай бұрын

@@thewriter2549 I'm looking forward to getting my 67 Shelby as well. Even if it takes 20 years to restore.

THANK YOU SO MUCH for this video series. I was born in 1957, in 1973 my first car was a1967 Ford Mustang Coupe 6 cyl, 3 speed in Red with Black bucket seat interior. Have been in love with that year Mustang ever since, & the 1967 Shelby has been in my heart since the movie Bullitt, with Steve McQueen in 1968. I still go back and watch that amazing chase scene over & over. AND MAN is that guy working on your car talented !!! THANKS. I now live in a mobile home park for 55 year olds plus folks, & in this park alone there is a 66 Mustang coupe in Red, a 1954 Chevy Coupe in Red & White, & a 1964 Buick Skylark Special 2 door coupe. 🤗

I love watching this professional, his knowledge is unquestionably perfect. So enjoyable to watch.

*Jerry!* It's always a pleasure to watch a true craftsman performing their work. The combination of experience, ability and especially *care* is so rare these days, sadly. The difference in the level of effort between this sort of "lifetime" work vs. the typical body shop collision repair is *huge* and why it costs so dang much! (There's many similarities between that Ford of yours and equivalent Mopar unibody construction of the day, Jerry 🙂 ). Looking forward to the next episode! - Ed on the Ridge

I started watching the restoration from the barn find to the turntable. The gentleman you chose to do the restoration is absolutely a master in his craft. His attention to detail is incredible. I am looking forward to the next video in the series. I agree that it’s great that there is no background music because I want to hear what you and the restorer have to say!

A rotisserie off frame restoration is the only proper way to do a car or truck it’s absolutely professional what this guy is doing totally respect him.

I’ve really enjoyed these videos. I seldom watch the long ones but these kept me glued. This 67 is from my era. I’m 74 and couldn’t afford the mustangs but my first car in 1968 was a 1960 Falcon 😂, but, found a mustang that had caught fire and totaled and it had a 289 HP with a 4 speed trany that went into the falcon rear ended and all. Sleeper for sure. Never done any racing but played with it a lot. It was funny when I saw someone working on side of the road and I’d bark tires through 3rd and got funny looks cause everyone knew a falcon couldn’t pull your hat off your head. Drove it for several years and parked it on my dads farm and younger brother played with. Wasn’t supposed to but dad sold it to a crusher. Already had the trans and rear end out and gave it to a friend that restored mustang’s.

Incredible workmanship by an experience craftsman. What knowledge and experience he has. Just amazing to watch and hear him explain the different aspects of a great restoration. I can't imagine what he charges an hour, but his workmanship is worth it...

Coating all of the metal inside and out is the kind of attention to detail I like to see.

He is a master at car restoration. Jerry definitely pick the right guy for this restoration!!

@thewriter2549

3 ай бұрын

I would not have bought the barn find 1967 Shelby except I had Jason to do the restoration.

Thanks so much for sharing this whole process with us Jerry. So happy for you…this is such a special Shelby. Your videos & narrations are always so top notch and bring us so much joy.

@thewriter2549

6 ай бұрын

Thanks for watching and understanding. I spend most of my time editing the video. This was 100 hours or so.

@daytonpyro

3 ай бұрын

is the car done? hope there is more to come@@thewriter2549

Thanks for sharing this with us Jerry

@thewriter2549

9 ай бұрын

sure, very welcome

Amazing resto

Wow! What meticulous detail this guy does! Very impressive!

i worked on these 60s 70s cars back in that day i saw these cars coming off the truck at the dealer i worked at, these cars were a car when they went to throw a way cars i was sick never was the same i was a body man, very good work young man you would have liked those days.

I resto-modded a 69 Mach 1 back in 2016,I did basically everything you've done here...Nice job..

Sure will be a beautiful looking Shelby when she's done.

This is the definition of professionalism 👍🇺🇸 Well done sir 👍

Fantastic video! We really appreciate the two of you giving us this outstanding content!

@thewriter2549

8 ай бұрын

Thanks for recognizing how much hard work this is.

Coming along very nicely.

@thewriter2549

9 ай бұрын

Thanks 👍 We have a half dozen or more of these to go.

I commented before the video, OMGAWD was this an incredible video to watch, such great detail to everything. Thank you for sharing

@thewriter2549

9 ай бұрын

Oh, that was you? I saw that, thanks!

Cant wait to see the results Jerry!! I watch your channel just for this build!!!

@thewriter2549

4 ай бұрын

Do you have any ideas why Part 1 and Part 2 have been popular, but Part 3 and Part 4 have been watched far less and for far less time per video? I am guessing a smaller group of people want to see more detail, which is why I slowed down on these.

@jimriley4757

3 ай бұрын

​@@thewriter2549 any updates on your restoration project? I'm looking forward to Part 5.

A true craftsman

Lookin good my friend.

Wow looks amazing

Verry cool seeing your car come together .

@thewriter2549

9 ай бұрын

It still doesn't feel like mine, maybe because I have yet to drive it.

Fascinating. Thank you for the Master Class restoration insights!

very nice work this painter restorer is very knowledgeable and informative in laymen's terms he knows his shit it was very enjoyable watching this car getting treated to a mani pedi this afternoon

The restoration is looking good. I’ve never noticed the middle line that goes 1/2 down the roof. Wow

@thewriter2549

9 ай бұрын

That line continues down the fastback's rear window.

watched all 4 parts. amazing work.

Fascinating the need to imitate the imperfections of the original manufacture in order to be concourse. I saw elsewhere that the final paint needs a small amount or "orange peel" to imitate the factory paint of the period. If you buff it to a glass finish, you will lose concourse points. Thank you for sharing this fascinating process! (my OCD I can't resist making my seam sealer neat. LOL)

@thewriter2549

8 ай бұрын

Where "elsewhere?" See if I wrote the article because I've written lots of articles about orange peel in factory paint.

@SaltFlatMonte

5 ай бұрын

​@@thewriter2549 That's fun to think about - I grew up reading your books and articles! My dad was a fan and was always against "over-restoring" these cars. I distinctly remember him lecturing me about orange peel when redoing his bro's Boss 302 in the early 90's. He shot the car with single stage and held out against base/clears until it was no longer possible to get/find those original style materials. He reluctantly painted his '72 Mach 1 in RM base clear around 1999 on top of the same PPG primers you used. Even then it was quite expensive!

It's looking good Jerry!

@thewriter2549

9 ай бұрын

Thanks, body work and paint is next.

Poetry in motion - by any standard!

Me too, keep it coming can't wait till the finish.

One day I’ll have him restore a Mustang for me! Great job!

Love this stuff......I've got a line on 68 Mustang convertible that we are going to need to rotisserie and I've going to use these vids for the base restoration.

Definitely going to be amazing 🎉🎉🎉❤❤🤍🤍💙💙

Excellent Work! That car will be stunning

I missed this one somehow...got it now.

Very nice work, I'm enjoying this project. Thanks to you both for sharing.

@thewriter2549

4 ай бұрын

Thanks, but I'm trying to figure out why parts 1 & 2 were popular, but parts 3 & 4 were watched far less. Do you have any idea? That's why I delayed so long on editing part 5. I'm thinking maybe only hard core people are aboard now.

@BrianJessome

4 ай бұрын

@@thewriter2549 Yes it looks like a lot of folks went right past part 3 to part 4. That's a tough one to explain. One thing for sure I appreciate how you guys just get right to it, no BS. It as close to a shop class as it gets.

Watching this car get a second life is fascinating, how long until episode 5? I'm addicted... :)

@thewriter2549

7 ай бұрын

I'll try to get to it after the story I'm editing now.

@justaskmeiknow5584

5 ай бұрын

​@@thewriter2549Jerry its been two months now and no new episode. Hope everything is going well

@thewriter2549

5 ай бұрын

@@justaskmeiknow5584 Thanks for your concern. I had impacted kidney stones that cost me two months. My thanks to the Mayo Clinic in Rochester I should have a new video edited and online by mid January.

This dude is awesome! But makes me nervous with no eye protection.

Very nice Good job

Good work

Congratulations on your Shelby! Thoroughly enjoying this series. Hope you're feeling better these days. Looking forward to seeing the rest. I would be a willing subscriber should you go that route! Cheers from Montreal!

@thewriter2549

5 ай бұрын

Thanks, and especially for your response on the subscriber question.

Does he have a waiting list 2 years out ?

Cant wait to see all the job done to this car till the end

Do you have part 5 posted yet? Loving this series!

I've thoroughly enjoyed the first 4 parts, when can we see more?

That’s incredible work, skill and knowledge. Industrial paint is amazingly good but amazingly expensive. I use it on some projects and it’s so different to “normal” paint, it sticks to metal like shit to a blanket, is extremely durable and will generally be more tolerant of poorer preparation. It goes on thicker and seems to go further and one coat is normally enough so I guess the high price actually saves time and money.

So awesome, love this restoration

@thewriter2549

8 ай бұрын

Thank you very much - more on the way.

Awesome work I would like to have the bottom,trunk also add rino liner sprayed on.

Wow so much work... is this overkill? Or is something less expensive and labor intensive an option for bringing say like a 22 yr old mustang like a 2001 bullitt with gas tank filler area rust and some electric issues and such?

Good information.

This entire series should be added to all high school shop courses…if, in fact hs shop course still exist. Do they?

Hell yeah ❤😁

Love mustangs

What about the mechanicals like engine and electrical... does he do those also? Or only body work?

Can’t wait for part 5

@thewriter2549

4 ай бұрын

Do you have any ideas why Part 1 and Part 2 have been popular, but Part 3 and Part 4 have been watched far less and for far less time per video? I am guessing a smaller group of people want to see more detail, which is why I slowed down on these.

@MegaWingman7

4 ай бұрын

@@thewriter2549 I actually watched part 4 first and then went back to watch how the quarter panels got replaced

Who is Jason,does he have his own shop? where is he located? This guy is a master craftsman.

@thewriter2549

8 ай бұрын

Yes, he's in Hereford, Texas.

👍 BEAUTIFUL ❤️

Over $1000 for one gallon of red PPG paint.....WOW!

@thewriter2549

9 ай бұрын

Careful not to spill.

Hey Jerry, love your content and the restoration of your car. Got a question, do you have engine and tranny for it? I hope you have it, it Will be not so easy task to find one these days i think. Much love from eastern Europe🙂👌

@thewriter2549

9 ай бұрын

Yes, got 428, 4-speed, dual fours, intake and air cleaner. All original. Thanks for asking.

Great work. What material was used to fill the panel overlap seam between the quarter sail panel and roof? The factory used lead.

@thewriter2549

Ай бұрын

Jason showed that material and explained much about it. I can't recall the name or I'd say it. I guess you all skim through the video. I get it. I do the same thing sometimes.

Nice work. What is the difference between a red oxide epoxy primer and others? Why choose that one?

@thewriter2549

8 ай бұрын

Jason explained that when he was spraying on the red oxide primer to the bottom of the unibody. I'd have to go back and get those quotes or risk remembering it incorrectly, so if you can go back there you will get the full explanation.

Hi Jerry, good evening! I would really like to know the name of the equipment you use to attach the car chassis and turn it at 90°C? I found a way here at the workshop to close holes in the bodywork using cast iron (melted). A ceramic plate is positioned under pressure behind the hole and the molten iron comes on top, for a quick and well done job, then just finish it off. I would like to know the name of the machine, thank you.

@thewriter2549

7 ай бұрын

I'll have to get hold of Jason and get the information for you. I'll see him next week. Thanks.

He's seam sealing leaves alot to be desired rest of the work looks great

Great video this guy is good! Where is the video installation of the quarter panels ?

@thewriter2549

Ай бұрын

Part 3 - kzread.info/dash/bejne/i6p4yLmkms3FeLg.html

Is there a part 5 coming on the restoration?

@thewriter2549

8 ай бұрын

yes, there is a part 5, a part 6, clear up to part 12. The editing for each part takes over 100 hours of computer work to complete.

Hi there, have you anymore videos of this rebuild, cheers from Aussie

I have 2 projects that i am working on can always take some good advice

PPG INDUSTRIAL BLACK NO SANDING and color is it single stag or base and clear clear is hi or low solid ???? Love your cars my 70 mock 1 ppg 13327 blue help my car on rotisserie and got it primed k 200. and DP40 gray in under blacked out

Any sign of next episode?...great stuff

@thewriter2549

4 ай бұрын

Thanks, the reason I slowed down is Part 1 & Part 2 were popular, but Part 3 & Part 4 were watched far less. I'm asking a few people their ideas why. Thanks.

What kind of spray gun are you using

I noticed the rollbar is installed. Would this have been installed at Ford or at Shelby? Also the plate for the rubber snubber at the front of the leaf springs, same question, installed at Ford or Shelby? TY

@jasonwhite6254

4 ай бұрын

Roll bar and snubbed was installed at shelby

What happened to the rest of the video’s? Wanted to see it completed,

@thewriter2549

4 ай бұрын

Impacted kidney stones put me a couple months behind. I'm going to be making the remainder of the restoration videos KZread subscription-only at $4.99 per month, cancel anytime. Is that something you would subscribe to?

@jimgummere5561

4 ай бұрын

I hope you are feeling better, and those things don’t return. I’ve really enjoyed watching the mustang build, but I just watch because I appreciate the craftsmanship. I would not be interested at $4.99 month.

@chriscaine348

4 ай бұрын

@@thewriter2549 I'm also very interested in seeing the rest of the restoration as I've been following this build since the beginning. But I wouldn't pay to see the videos. Just my two cents.

Its is easy for someone to sit at home (like me) and watch and nit pick this resto....however in this case I will. I spent 20+ years in a paint shop working for a global Automotive company and sealer was my speciality and I find it hard to believe even in 1967 that Ford USA would had applied their sealer then the operator running their fingers over it...... certain area's yes like deck lid's bonnet's etc the corner area's but the rest normally by gun then brush especially inside the floor pan as for the original "bead sealer" not touching the seem that would had been beacuse the operator was lazy and didn't do their job right and the quaility control operators at the end of the line in this process would had missed it (happens 5/100 cars or so) depends on the operators at the time. Apart from that it was most enjoyable to watch job does look amazing.

@thewriter2549

8 ай бұрын

If we could talk to several assembly line workers back then. Otherwise, don't you think it's fairly easy for restorers to see the remnants of the work including fingerprints in the seam sealer?

@peterbrady5273

7 ай бұрын

@@thewriter2549 no….. have you ever work in an automobile company in their paint division for 20 plus years ?? If you had or have you would understand the point I’m trying to make.

@thewriter2549

7 ай бұрын

​@@peterbrady5273 I think I understand your point. I'm not disagreeing with what you are saying. My source here is the restorer. Maybe an assembly line worker can respond here.

@peterbrady5273

7 ай бұрын

@@thewriter2549 as I originally said it’s easy for me to sit in front if my 75 inch tv and nit pick the resto … however your right would be good to hear it from a line worker definitely. If I had a Mustang to be restored I’d take it to this guy in a heart beat definitely you can see his attention to detail and his passion for his work which is a rare event in the modern world…. I learnt my craft from old school tradesmen who used to draw and draft vehicles by hand in a drawing board not like today even though I was brought up in the CAD era of manufacturing then it n to automation etc. I’m looking forward to the rest of the build and I wish you well.

@SaltFlatMonte

5 ай бұрын

​@@peterbrady5273Sorry to nitpick in return but how many pre-1990's USA cars have you seen apart? Build quality and QC was really that bad in many cases. The seam sealer is always a mess on these cars. This Shelby is being restored as close to its as-built condition as is practical. Like Jerry said, you can see witness marks all over the original seam sealer showing brush strokes, finger swipes, blobs, etc. It's plain as day. Nothing really to dispute.

BUTTTTT SEALER

How is the progress going on the GT going? Had to rewatch due to withdrawal symptoms. 😂

@thewriter2549

3 ай бұрын

Finished the Shelby last summer. Got behind on the edits because they take over 100 hours each. I don't know why parts 3 and 4 had far less views.

@buffdoc46

3 ай бұрын

@thewriter2549 Glad to hear it got finished. Do you have pictures on Instagram of the Car finished?

@thewriter2549

3 ай бұрын

No, I want the car to be revealed in this series.

Hi all I cannot find the rest of the series can anyone help, cheers

Question, what supplier made the quarter panels you used?

@thewriter2549

8 ай бұрын

Dynacorn

@tombuer7708

8 ай бұрын

@@thewriter2549 Thank you! Yeah, I went back to a previous video and found that information. Looking at buying some fastback quarter panels for a project I have and have heard some suppliers didn't fit the same as the originals.

@thewriter2549

8 ай бұрын

@@tombuer7708 I think today's quality quarter panels fit better than original Ford quarter panels. Did you notice in part 3 the product Jason used in place of lead that the factory used? And he said that new product is better than lead.

@tombuer7708

8 ай бұрын

@@thewriter2549 Yeah, I used to be a bodyman years ago and know about that "all metal" filler.. I drove a 67 fastback years ago and want to "recreate" the fastback I had that I sold in the mid 1980s.. btw, those were coupe quarters he cut off. The second of the part number started with 65, that's Ford's code for coupe. Fastback was 63 and convert was 76.. It's been many years since I did much body work so some of the tools and some procedures have changed.

It’s been 25 years since I’ve painted a car….nbut back in the day there was no way you could touch something with your bare skin before painting it. It would blur after it dried. Paint must be a lot better now.

Who is the guy doing the work? Very talented.

@thewriter2549

6 ай бұрын

Jason White (Jason White Restorations in Hereford, Texas)

@billcarlson1730

6 ай бұрын

@@thewriter2549 You picked the right guy Jerry.

When is the fifth one coming out??

@thewriter2549

7 ай бұрын

Probably about a month. I may put this series in a special subscription-only part of the channel that has special content that only subscribers can access. How do you feel about that?

Dip tank to clean it then dip tank to seal it

Ep 869 what is I want it for my fastback but how i can find ?? I want the color

TBH I don't no any car painter the only uses one hand as you have to learn to use both as your arm gets tired and going into a corner...