Не зря говорят... Кто плохо красит, тот хорошо полирует 😂 👍

@user-lk5xf9pq4d

14 күн бұрын

100% и лака там не осталось 😂

@archibald656

14 күн бұрын

Всегда воюю с малярами на работе чтоб делали хорошую шагрень 😂

@dimaorlov2034

12 күн бұрын

Ага полирует так же как и покрасили​@@user-lk5xf9pq4d

@ValeraSamara

11 күн бұрын

3 маляра и все нужную шагрень делают.

@user-dv6oy1dc6g

11 күн бұрын

Только бараны будут матовости убирать эксцентриком, как на видео) В лучшем случае - будет переполировывать под роторку сначала. В худшем - табло набьют за такую работу)

Now I feel confident enough to spray paint the truck! 💪🏻😎

@modernvehiclecare

29 күн бұрын

💪💪💪

@MrJay-kb8xj

23 күн бұрын

I was thinking the same thing because I know it’s going to look like a bag of oranges smack the hell out of it.

@user-ww4rb8zr5t

23 күн бұрын

Не замучаешься целый грузовик шлифовать

@PatOffical.

23 күн бұрын

Bro I was gonna single stage my old Lexus soon

@jessecruz471

22 күн бұрын

Not a bad idea. Plenty on videos on youtube for tips. I'm painting a fender this weekend!

Меня тоже так учили,будешь плохо красить,тогда научишься хорошо полировать и даже шагру подгонять

@uaDimonuaDimon

22 күн бұрын

А где она там осталась?

@homelesdog1

22 күн бұрын

Да же БМВ и Мерсы с завода целюлитные, так что полировщику работы хватит.

@user-qx1dz5kj8t

21 күн бұрын

​@@homelesdog1на заводе красит робот в 4-6 рук. Там нет перепыла. Маляр красит одной рукой). Пока пройдешь к концу, начало подсхватывается, и не сливается с окончанием) . Вот этот перепыл так и убирают как на видео. Как раз левое крыло. Капот обычно последним красят. Опыл на застывшем уже крыле, с которого начинали машину. А нормальную шагрень конечно убирать и ненадо😊

@user-ih2zg4km9b

21 күн бұрын

Есть и нормальные так то лаки которые позволяют проходить машину в круг без перепыла, при хорошем помещении и полировать не нужно ничего

@alankerr8036

21 күн бұрын

​@@uaDimonuaDimon😅😂😅😂

Important notes from a career bodyguy; sand in an X pattern (crosshatch) and always use a soft block to wetsand when applicable, but always rest your hand flat across the top of the block to distribute even pressure. If sanding by paper with no block this becomes the most important step because you will create “finger marks” if you don’t distribute force evenly, and even more so if you sand in straight lines. Also it worked here, but don’t practice sanding over an empty marker slot or headlight or badge etc (any divot tbh) because of how sheet metal is formed, even though there is a divot, many times the edges of that divot are ever so slightly raised. This means that you have an extremely high likelihood of sanding through the clear and paint on those edges; ALWAYS sand around them! Otherwise this was a great video and a fantastic way to get into a higher level of detailing, or bringing old paint to new again for flipping cars! People like shiny. A lot can be looked past if you have a sexy shiny paintjob 🎉

@garethhopkins5301

20 күн бұрын

Nothing like some good ol experience

@j-fp9075

17 күн бұрын

I thought the same, he's not from the trade. Looks more like the detailing one.

@user-oj3wo8qn9l

14 күн бұрын

Такое ощущение что вы мой мастер с которым я работал . он меня так учил как вы говорите .

@danthesprayman2986

13 күн бұрын

Nah he likes hand sanding and leaving fingers in the clear after buff🤫

@Finetouchautopros

11 күн бұрын

How long are you suppose to wet sand on each grit?

3000 and 5000 are so much more effective with an orbital sander. But regardless you did a very nice job.

Best peel removal I've seen by hand no 3m plugs here

I absolutely love wet sanding. Sure it’s hard work but it is so rewarding.

@modernvehiclecare

2 күн бұрын

🤙

Never circle motions when sanding. Always up down or side to side. Chamge the angle. But never in circles.

@modernvehiclecare

29 күн бұрын

Yes yes yes

@gsrhatch14

28 күн бұрын

Why not in circles

@jacobshank9362

25 күн бұрын

I also use this technique as it’s more efficient, but I don’t believe circular motions really matter. Even sometimes that technique may be beneficial-someone who can finish out sanding marks, can finish no matter what

@azimpetra

24 күн бұрын

@@gsrhatch14so you don’t miss it, it ll leave tiny unsanded islands and might clog it up on certain spots. Meaning you have to go at it again, taking out more clear coat on unneeded area. The key is preservation, not perfection. If its a show car, its fine, since they’ll have more clear coat.

@user-fl3qu2pp6b

23 күн бұрын

Судя по всему ты тоже не шаришь. Замывать, шпаклевку, грунтовку, краску нужно перекрëстрыми движениями +,х. То есть по вертикали, горизонтали и по диоганали, в обе стороны. Тогда получится иденально ровная поверхность, без борозд от образива

It’s good to note that not all orange peel can be removed. What do I mean? Some vehicles have an extremely thin clear coat compared to to other vehicles. The orange peal you may be seeing is at the paint level not the clear coat level. Or the clear coat is so thin that you risk burning through. So be sure to check that out. Read the forums or whatever your favourite source first to make sure you know what you are dealing with and how best to tackle it. What works for this vehicle could be an enormous mistake on your own. Case in point the newer rams can be a disappointment on the level of paint correction. You can fix it somewhat but not all the way sadly.

@thatguy6214

22 күн бұрын

Yeah people need to understand this before sanding their fucking car without experience. Use a block too not your fingers.

@deven6518

20 күн бұрын

I sand base before clear. It doesn't destroy the finish

@gaylecoombs5510

20 күн бұрын

That is true but for people doing this at home even if they look at pics and videos I doubt they will be able to tell when they look at their vehicle

@TheLumberJacked

20 күн бұрын

@@deven6518 depends if this is a an existing car or not. My focus was on existing vehicles with good paint.

@Rabiiid

18 күн бұрын

@@thatguy6214 Chill out. You can only tell i painted my honda civics spider web cracks on the bumper with the perfect match tafetta white spray paint if you up closely. I didnt even care to even sand. It evem kinda shines lol. although i find it sooo odd my 2010 honda has thicker paint and clear coat then my chrysler 200 2015, its absurdly thin

Always said this. A pro painter does this fast and with same resault basicly everytime. BUT if you have time on your hands, painting is something everyone can do.

@Sidewayz_Gaming

23 күн бұрын

I would have to disagree massively. I have painted cars for over 10 years, seen a lot come and go. Even some experienced painters struggle with metallics for just one example.

@user-zj1ry8wz1z

23 күн бұрын

@@Sidewayz_Gaming im just a guy in the street. And I have never had a problem.. u can stretch it out and sand 8k between every layer and use like 4 weeks to paint.. but the resault would be perfekt flat. Other factors as mixing well, good base coat and generelt good prep is ofc important aswell. And what u say now is my perfect example. Give the same guys 4 weeks to do the job. And it would be easy for them. U know just aswell as the nextdoor neighboor that if you apply thin coat, take ur time sanding, the ressult will be good.

@billymanilli

14 күн бұрын

I can lay down paint very well... however when it comes to matching colors, my eyes just aren't there!

@user-zj1ry8wz1z

14 күн бұрын

@@billymanilli 100% I use Color gun to match exact color. Used parts are usully sun damage :)

@nathan12np

13 күн бұрын

Takes a long time to learn

AND you buffed until the compound was translucent. Bro, keep it up. Love seeing another detailer take incredible pride in their work. Nice work brother

@modernvehiclecare

2 күн бұрын

Thanks for watching bro!

Lots of experts on here. The end result looks great so let him do it how it works for him.

@jonymnemonic3213

10 күн бұрын

тут только перекраска так как это не надолго.

Honestly I just eat the peel

@modernvehiclecare

29 күн бұрын

😂

@GehMaFegen

24 күн бұрын

Are you stupid? You can't eat the peel........unless you boil it first

@katlehovuyani3198

23 күн бұрын

What the fick 😂

@georgepulido3258

22 күн бұрын

😂😆

@JMTB10

22 күн бұрын

✋🙂‍↔️

Good job 💪🏻

3M has the trizact 8000.... maaaannnnn they are the game changer for that gloss sauce finish!

looks awesome but for average person (such as me), results of finished job at 2k paper and later 3-step polishing would be enough and still makes smile on face 💪

Sic, 5000 grit. Total commitment. Great job. Far more patience that I have.

@MrMcSims

14 күн бұрын

не надо 5000. это бред

Block sanding should be done in a crosshatch pattern, like an X moving across the panel.

@modernvehiclecare

23 күн бұрын

Yes it’s best to always alternate sanding directions

@rc-t3k

21 күн бұрын

( X )

@Markreedervill

21 күн бұрын

Only if you’re trying to straighten something for polishing not really necessary

@als9622

21 күн бұрын

It’s is an “X” if you turn your head

@joaocgama

19 күн бұрын

​@@als9622Hallelujah, someone with a brain here!!!

As pointed out by others in the know, X pattern up & down. Still came out well.

Beautiful work. I was only taught to use 1000-1500 so my mind was blown to see the 5000🤘🏻😆 I’d love to learn to make paint look like glass like that.🖤

Paint in the correct conditions you won't get orange peel! What's your booth temps and humidity set to?

@minimumeffortenthusiast8242

18 күн бұрын

Doesn't matter. That wasn't the purpose of the video. The purpose was to show how to turn a crappy paint job to a way better result, regardless of who fkd it up to begin with.

@AnthonyDurand1

14 күн бұрын

Why spend 1000s in a professional shop if you can get the same result from Maaco if you do a little of the work yourself? Cheap paint jobs are legendary if you make sure it's not painted in a dusty car park

Polishing a turd great job 👏

@KLOKSLAG1911

20 күн бұрын

😂😂😂

Black is the hardest color to work with also. Came out great.

Muy bueno!! Me gustó el video .. Bárbaro .lo felicito .. muy bueno el trabajo.

Scholl s20 black will clean that up from 1500.

@MHal312

21 күн бұрын

Or 510 3d

@uberrandomperson

18 күн бұрын

Almost anything will. But its cheaper when you have to use less polish. And higher probability of success. Its a do it proper do it once kinda deal

@MHal312

18 күн бұрын

@@uberrandomperson sandpapers more expensive than polish usage.

One word of advice. Never use you fingers on any sand paper

@modernvehiclecare

26 күн бұрын

3000 and 5000 are foam backed. Just use a pad for the regular sheets

@Crsf84

24 күн бұрын

@@modernvehiclecarejust love youtube one word for advice type comments. Geniuses without looking everywhere ..

@palledrengens

23 күн бұрын

Using only ur fingers will put more pressure under the area u hold, and not much around, always use a pad that puts pressure even on the paper!

@alman6581

23 күн бұрын

@@palledrengens fully agree. Anyone that's ever seen a light sand using a hand instead of a block, will see the issues

@palledrengens

23 күн бұрын

@@alman6581 i've sanded some things in my life, especially headlights 😵‍💫 i miss the old days with glas.. i used to run a set of German "flüsser" light bulps H4 110/145 only did an upgrade on the relay so it didn't burn, the headlights looked sharp always, plastic is shit, the sun aint here for dancing, it means business and this a good job he does, but i would have repainted it or sanded it with 600-1000 and then given it some new clear coat.... But he doesnt say if it was painted in a heated booth, how much pressure he used or if he painted it while it was under 30° celsius....when i hobby paint thing, i ALWAYS heat up in between 30-35 degrees Celsius and leave it to dry in a heated area..i made a "green house" of plastik to put over with a ir lamp above, even though it is painted with spray cans, it looks as if a pro painted it, but i also sand the primer 3 times between layers before i paint, first i "dust it" then i give a 1st layer wait 24 hours and then wet sand it in ice cold water, dry it of and let it heat up against, 2 layer, sanding and then 2 layers of clear coat, sanding and polish😎👌🏻 stupid amount of work, but i like it, i enjoy making my own things, "build not bought" 😉

Re-clear coating is recommended as the film may not be thick enough and may peel off with a single-action polisher.

BROTHER. Well done. Dont know the amount of time this took, but looks well worth it

@modernvehiclecare

10 күн бұрын

Thank you bro!

I stop at 1500 and use a real buffer your learning though, use 1200 to cut thru peel and other shitty paintwork. That small buffer comes in handy though wish I had one.

@ricksmith1574

29 күн бұрын

I'll go to 3000 for certain jobs. No need for 5000 though

@modernvehiclecare

29 күн бұрын

Im using Rupes lol show me a “realer buffer” 😂

@ultimateflyful

26 күн бұрын

@@modernvehiclecare oh god lol, I could imagine trying to do a whole car with a 3 inch buffer, you crazy bro lol. try dewalt rotary buffer with a wool pad haha save you probably a day.

@modernvehiclecare

26 күн бұрын

I use the 3 inch on fenders and trunks man lol I have the 6 inch as well 😂

@ultimateflyful

26 күн бұрын

@@ricksmith1574 i've went to 3000 also when I was younger, but since I learned how to buff with wool pad and leave no swirls it doesn't seem any different to me, I guess would you rather spend a little more time sanding or a little more time buffing everyone does things different. edited: for anyone trying to learn with wool pad main thing is keep the thing flat on the surface, push about 20 lbs of force and slow down. you will feel the buffer pulling the paint when your doing it correctly. touch the paint if it's to hot to touch stop buffing you about to burn it, i've buffed a few and seen smoke come off the paint, haven't burned one in years.

Молодец!Отличная работа!

@user-ul2le4iq2u

19 күн бұрын

Полировщик да, молодец. А вот к маляру есть вопросы...

Good work. Word of advice as someone who did stone polishing, spend enough time on each layer to fully remove the scratches from the previous grit, you will save the effort of pushing hard and wearing down your higher grit pads. You never really make something truly flat, but the scratches become smaller and smaller until you can't see them with many materials

@modernvehiclecare

12 күн бұрын

Great tip! Thanks!

There's a cut between the spray and the first sanding and the surface looks smoother...

@calvinblinkee

17 күн бұрын

Dude this is a typical procedure to remove orange peel. There's no need for trickery.

So.... you're a magician???

@modernvehiclecare

29 күн бұрын

😂🤷🏻‍♂️

Or someone that can paint to start with 😅🤣

Big Respect Bro👏

@modernvehiclecare

19 күн бұрын

🤝🫡

I just let the elements take care of the buff job.

После 2000 можно спокойно полировать

@user-xd7sw1si5q

18 күн бұрын

Не черный цвет

@MrMcSims

14 күн бұрын

@@user-xd7sw1si5q всем пох.

Mirror painting ✨ 💪🤩👍

I gotta repaint my 370 and this is perrrrrfect

@modernvehiclecare

14 күн бұрын

🤙🤙

Try starting with 1000 for real heavy peel, then step it up to a finer grit 1500, then 2000. You can go higher than that. But thats what you number 1 compund is for, taking out all those little sanding marks and imperfections. Other than fish eyes, dirt in the clear and so on.

@modernvehiclecare

29 күн бұрын

I have tried 1000 but I find that it’s a bit too aggressive. It’s possible for flat panels but I wouldn’t start with it around edges at all

@jasonlouis5498

23 күн бұрын

I find I get the best results if I just make sure I do a really good job with the 1500. Then 2000, 3000 and start compounding. Comes out pretty good.

So is it really a crappy paint job if you’re just fixing the clearcoat?

@modernvehiclecare

29 күн бұрын

I would say so lol

@pielucas439

28 күн бұрын

Yeah, I see plenty of newer vehicles with the clear coat peeling off after as little as 6months. Automakers just don't care anymore

@ArtistRide

23 күн бұрын

​@@modernvehiclecare at least he leave you enough coat to remove before paint.

Well done my man

Pro tip: before you start ANY sanding you wanna make sure you remove any contaminents on the vehicle. Wash with water + dawn soap and then clay bar. If you just painted the car disregard, just make sure your surface is clean of any debris ✌️

@modernvehiclecare

11 күн бұрын

Great tip!

Meh! Just hit it with a heavy spray of rattle can high gloss clearcoat and call it a day. 3 minutes later and you're back to Miller Time!

NEVER sand with your fingers 👊🏻

@Alexkasai

22 күн бұрын

You can if you know what you’re doing, just got to be aware of contact point and pressure level, some of the surface like vents, gap between lights and body, or the interior piece I like to do it w my fingers bcs I’d be finished sanding w the time I’d take making a new block that fits the shape

@jacobparsons5942

22 күн бұрын

Get them waves bruhhh

@ModifiedTaco

21 күн бұрын

It’s so fine it’s not gonna matter.

Excellent. Now just 15 hours of the rest of the car to do 😂😅

Lmao there goes the clear coat lmao .

Everyone’s willing to spray paint there vehicles but not willing to get to that final finish! Looks great!

It doesn't matter which way you sand as long as you don't over sand it. Circular motion does not give you even ssnding results. Just make sure you have enough clesr coat to play with or you will regret it. Do it in stages. If you need to keep sanding, then go for another round. Get a clear coat measuring device, it helps.

that trizac is good shit man

@modernvehiclecare

10 күн бұрын

It definitely is man

Is just superb.!!! 👌😍😎

@modernvehiclecare

20 күн бұрын

Thanks!

Better hope there's enough clear on there to do that . Seen people try that go down to the paint 😂

@modernvehiclecare

2 күн бұрын

🤣

nice. how long would it take?

Granite ,solid surface polishing pads?

The trick is the smile!

This is great ❤

@modernvehiclecare

12 күн бұрын

Thanks!

Then follow with perfect finish on a soft foam pad…

Always do long full strokes, done stop in the middle of the pannel

If you've never done this, make sure you mask up all your edges, otherwise youll rub through and will ruin your paint. With enough experience youll be able tonstop before the edge and see the changea as they happen, then adjust your motion..

@modernvehiclecare

22 күн бұрын

Good advice!

Now i can see dust on my phone great job .😅

Now it's a thin shitty paint work 😂 Just kidding awesome video, absolute fascinating

@modernvehiclecare

4 күн бұрын

Haha thanks!

Я может странный, но мне нравится покраска под "шагрень". В меру, конечно)

You have earned a subscriber...

@modernvehiclecare

20 күн бұрын

🤝

Must this be done by hand? Is there no tool that can achieve the same result?

Чел просто мастер своего дела.... Респект

@modernvehiclecare

22 күн бұрын

Thank you

Mirror Finish

Are you canding down the humps on the clear to get a smooth finish?

У меня бы такую работу не приняли бы деталь без шагрени это косяк! Потому что можно покрасить на улице а потом так же полирнуть и топо все ок, но нет как раз таки мастерство маляра заключается в том чтоб покрасить деталь так чтоб полировка не требовалась, покрасил высушил собрал отдал так это должно работать в идеале а шкурение лака это удаление дефектовпричем желательно точечно чтоб не испортить шагрень на всей детали а на видео вся деталь это дефект😂

You can probably make rust shiny when you polish it😂

Novice: Orange peel is impossible to get rid of. Modernveliclecare: Hold my orange juice.

is the sandpaper just not coarse enough to scratch the paint??? up until this point in my life i thought sandpaper would scratch the shit out of your paint

Hey dudes I’m clueless when it comes to this.. is he sanding the clear coat? Or the paint before applying clear coat?

Solid work

А такую полировку 13- ти элементов полной покраски покажешь?

@user-tq3ug6ur5j

11 күн бұрын

Видео на 2 дня никому не нужно😂

As long as you have enough clear coat

Pretty incredible have to say

@modernvehiclecare

20 күн бұрын

Thanks

Hammer geil. Hat der Kotflügel nur Lack oder auch Klarlack?

I like that happy face! 😅

what polisher is that? great video

@modernvehiclecare

2 күн бұрын

Thanks it’s a Rupes LHR75E

Here is an idea, how about you become proficient at spraying so you dont end up with every vehicle looking like a welders mask?

Products list please , is that a random orbit polisher ? Make model ?

Do u do that before the clear coat or after?

Which buffer is that?

Good work

@modernvehiclecare

14 күн бұрын

Thanks

По такому глянцу Хорошо определять крашеные детали👍

Now you've gotta match that texture to the rest of the panels. Next time, use an OPR pad to gradually reduce peel to match that other panels.

So I can just wet sand my old white original paint on vehicle ? And polish and it will look better your saying ?

Man that peal went away as soon as you sprayed water

My old boss once told me to never use my fingers to hold the sandpaper instead use my palm or something flat so you dont create low spots

Is this the same as grinding your welds?

Good job

Orange peel magician

@modernvehiclecare

4 күн бұрын

Haha thanks

Отличная работа 👍

Peel is there to stop UV damage.

Would be beneficial to tape the door line. But maybe he will continue there

Superb ❤❤❤❤

@modernvehiclecare

16 күн бұрын

Thanks!

When i do this, does it break the clear coat, do i need to paint it again, or can i leave it like that after polish?

You can skip the 5k and go straight to the last step. Done it hundreds of times, try it.

Nice orange peel removal, is it me or do you see a face in the clear coat at around 26 second mark?

30 лет назад. Наждачка 1000 (если смог найти, обычно 500), а дальше зубная паста "Жемчуг" на фетре. Эффект тот же, но без понтов.