Everything you need to complete this build: www.amazon.com/hz/wishlist/ls/2QGXVOBD1890O?ref_=wl_share&_encoding=UTF8&tag=junglecat0b-20&linkCode=ur2&linkId=8767672fb11f3a39e8c287147ec4be49&camp=1789&creative=9325 #ad

Both the box and the video, very well done. Someone else suggested it and I’ll second it: would be cool to see an update as you’re taking it out and using it. Thanks for the content! Keep ‘em coming.

Very tidy. Some good ideas there.

Turned out great, mad skills! Cheers

Fantastic 2 part video mate! I'm inspired to throw my rubbish cheap adventure king drawers out and have a crack at making a set similar to yours.

Very well done! I am in the process of building a drawer and slide system in my 100 series as well. Going down the rabbit hole and enjoyed this build, Thank you!

@JungleCatt

2 жыл бұрын

Thanks! Send/post some clips!

The end result is incredible man.

@JungleCatt

10 ай бұрын

Thank you!

Great job on this build. For the sleeping panels maybe a little wood wax to help things slide a bit better

Very nice! I’m a rookie when it comes to wood work so this is very informative. Sub’d for more!

Incredible work on the box!

Superb effort. Well done. I'd be well chuffed with that. I like it. 👍

Phenomenal video man! Would love to get the plans for this. I have an 80 series so there may be a few different tweaks.

You nailed it. It’s a nice peace of work

@JungleCatt

2 жыл бұрын

Thank you!

Great Job! The velcro reliefs looked closer to 4/32" deep than 2/16"

Nice build

Good job!

Good job … about to do something similar.. 👍👍👍

I REALLY like your design, it looks clean and well built... I am struggling with the design for my sleeping platform extension in my 2007 Chevy Tahoe. The way you attached the slides and made them stable was ingenous... Question for you if you dont mind, What, if anything, would you do differently in your bed slide design if you built it again?

@JungleCatt

2 жыл бұрын

Thank you! I think the platforms worked out pretty well and wouldn’t change much. One thing I noticed is that it would be nice if they were 3-4 inches shorter so I could still drive comfortably with both extended. Right now I only set up the passenger side if I have to drive anywhere. Here’s the design that inspired my approach: kzread.info/dash/bejne/gpd5y8-jaNXAqZs.html Good luck!

Where are you located in SC? I have a 2001 Landcruiser and I'd love to take a look at yours in person with the cabinets.

impressive

hey mate I love this design I hope you don't mind but i wanted to use this for my build in my 100 series Landcruiser .

@JungleCatt

2 жыл бұрын

Of course not! I got a lot of ideas from KZread too. Send some pictures if you do!

This is exactly what I am looking for , for my LX470 .. unfortunately I don't have skills to do it.

@JungleCatt

11 ай бұрын

Dude you can do it! Just take your time and measure very carefully!

You did a fabulous job. What do the sleeping platforms rest on when they are stored (i.e., what do they slide back and forth on)? The top of the drawer slide? Thanks.

@JungleCatt

Жыл бұрын

Thank you! That’s right they lay right on top of the drawer slides.

@randyrabidoux9291

Жыл бұрын

Sorry to pester, but I’m also curious if you used a furring strip or the like on the base closest to the second row seats. Maybe it’s just the padding on my flooring but my floor dips down toward the 2nd row pretty severely. That said, I don’t want to add height in the back that will cause the drawers to angle forward and rub the tailgate. Thx.

Really like your design a lot. Getting ready to do something similar on my 98 LC100. You didn't happen to make any plans for this, did you?

@JungleCatt

Жыл бұрын

I wish I did! Good luck!

I checked out your channel, it seems you are all about just repairing vehicles? I was hoping to see you take this camper out to camp in it to see how it goes, will that ever happen in your videos?

@JungleCatt

2 жыл бұрын

Maybe I’ll do a video next time I go!