Part 1 Replacing Ford's 3.5L Ecoboost VCT Units!
Автокөліктер мен көлік құралдары
In this video I will be showing my whole process of going about replacing the Variable Camshaft Timing (VCT) units on a 2017 Ford F-150 3.5L Ecoboost (In plenty of other models and years). The VCT rattling noise on cold start up and at idle is a common issue on these engines and I have done plenty of them in my career as a automotive tech. I am going to bring you along and show you the entire process of tearing down everything and getting to the actual VCT units and replacing them. This is not going to be a very in depth "How to" replace the VCT video, but more of just showing what it all takes to do the repair.
Hope You Enjoy and Godspeed ✌️
-------------------------------------------------------------------------------------------------------------------------------------------
--- Please excuse the poor audio quality and my breathing into the mic. I'm still trying to figure out the best audio recording options for these type of videos, so I will greatly appreciate your grace as I continue to figure that out. Thanks! 😊 --
--------------------------------------------------------------------------------------------------------------------------------------------
0:00 - Intro
1:10 - Removing The Front Grill
4:22 - Removing The Headlights
5:56 - Removing The Font Clip (Radiator Support)
10:28 - Removing Charge Pipes and Intake Pipes
15:42 - Positioning Coolant Hoses Out The Way
19:10 - Removing The Intake Assembly
20:37 - Disconnecting All The Electrical Connectors
21:20 - Removing The High Pressure Fuel Pump
24:12 - Removing The Valve Covers
--------------------------------------------------------------------------------------------------------------------------------------------
Outro Song: Quavi
Artist: Azucares
Link: www.epidemicsound.com/track/j...
----------------------------------------------------------------------------------------------------------------------------------------------
#ford #mechanic #engine
Пікірлер: 7
Super helpful video!! Thanks!
@godspeedautoshop
2 ай бұрын
Glad it was helpful!
Is there enough play in the AC lines that you could keep the condenser connected and just push it to the side or is removing those 2 lines a must?
@godspeedautoshop
Ай бұрын
I think removing those two lines are a must if you want to position the cooling module to the side. The A/C lines do have play, but I don’t think enough without damaging or compromising the integrity of the lines.
You must need to be incredibly experienced to put that all back together.
@godspeedautoshop
3 ай бұрын
It might look daunting, but luckily they give you workshop manuals just in case you forget.
Yeah you can do that with out doing the majority of that 😂