Painting Perfect Paint Lines on Foam Planes using Tape Without Peeling off the Original Paint
Ғылым және технология
#CallieGraphics #rcplane #edf #JustPlaneCrazy #AL37
Have your struggled painting a foam airplane because every time you lay down tape it peels off the original paint. Fret no more my friends. Just Plane Crazy is forever going to change the foam painting game. This simple trick was discovered while painting a custom AL37 for a fellow club member.
Make sure you like share and subscribe. Remember donations to the channel are also accepted.
Paypal Donations always excepted:
paypal.me/brendenmccormick280...
Follow me on:
Facebook Official Page: / officialjustplanecrazy
Facebook Member Page / 2135398913272660
Instagram / _justplanecrazy_
Check out the Merchandise @ teespring.com/stores/just-pla...
Пікірлер: 207
Genius!. Such a simple but effective way to cure a problem we have had since foamies came out. THANKS!👍
Thank you! We love our foamies and your painting masking suggestion is a big help.
Wow! Thanks for sharing 👍
Boom! Love it! Thanks for the trip bro!
@JustPlaneCrazy
3 жыл бұрын
Anytime my man
Thanks for the tip ! I tried it on a scratch built foamie. I just repainted my new Freewing F15 90 mm red,white and blue . I repaint all my models and this talcum powder trick works.
Awesome, can’t wait to try this out. Thank you.
Awesome tip!
Love it! Thank you
That was awesome thanks for all the tips and tricks.
I can't wait to give this a try. Thanks for sharing!
@JustPlaneCrazy
2 жыл бұрын
Thanks for watching. It works like a charm. Don’t forget to share and check knout my Insta account
Amazing.. Thank you!
Great tip! Will try next time, thank you!
You are my, and every bodies, hero right now.
@JustPlaneCrazy
3 жыл бұрын
Thanks my man. Share away
Awesome tip. You just changed my painting game tremendously. Thanks.
@JustPlaneCrazy
2 жыл бұрын
It’s worked for sooo many people so far. Best part it’s free. :-)
I knew there was a reason I hadn't gotten to tape off my T-33 to TV-1 conversion for the next color! Thanks so much for the tip!
@ret737
3 жыл бұрын
Just finishing up my T-33/TV-1 Jerry
Thanks!!!
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Don’t forget to check out my Instagram and share this vid
Excellent discovery! Now my paint jobs will become less stressful. You da man B!
WOW! That works GREAT! We'll be trying this soon too, thank you!
@JustPlaneCrazy
2 жыл бұрын
Thanks for watching and commenting
Game changer. Thanks!
@JustPlaneCrazy
3 жыл бұрын
I thought the same thing. Thanks for watching. Don’t forget to share away
It's great to always be learning something new,. This is great! Thanks!
Thank you for the new painting trick.
@JustPlaneCrazy
2 жыл бұрын
Best trick ever
I paint EVERY one of my planes - this is a great tip thank you !!
@JustPlaneCrazy
Жыл бұрын
Thanks for watching and comments. Great tip indeed. 😝😜🤨
That is cool, going to have to try this on my Eflite 90mm Viper project👍👍👍
You my friend are a genius. That’s awesome.
@JustPlaneCrazy
2 жыл бұрын
Some days I get lucky. Thanks for watching. Don’t forget to share it. Also if your into Instagram subs they are always appreciated.
Awesome tip!! I'm going to try it on my next repaint. Thanks for sharing the tip.
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Don’t forget to share share share
Thats A JUST PLANE CRAZY TRICK!!! W O W !!!
Mate. That is excellent. Thanks for sharing.
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Don’t forget to share away
It will change your RC life!
Thanks dude!
@JustPlaneCrazy
2 ай бұрын
Welcome
awesome
@JustPlaneCrazy
2 жыл бұрын
Thank u
Love it!
@JustPlaneCrazy
2 жыл бұрын
Thanks and thanks for watching
very cool
@JustPlaneCrazy
Жыл бұрын
Thanks
Thanks for the detailed instructions. Can’t wait to try on my trainer which has a lot of repairs.
I didn’t have any talcum powder and tried corn starch. Worked great. Thanks for your suggestions
@JustPlaneCrazy
2 жыл бұрын
Welcome thanks for watching. Don’t forget to subscribe if you didn’t and check out my Instagram. Thanks
Awesome, now I can move forward with other projects.
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Don’t forget to share and check out my Instagram
Nice 👍🏾
Oh boy that Hawk lives on😂😂
@JustPlaneCrazy
3 жыл бұрын
Lol. Well kinda
Sweet!
@JustPlaneCrazy
2 жыл бұрын
Thank you.
Excellent tip I'm going to do a repaint on my edge 540. Two tone. I will put this tip to the test. Thanks Brennan ✌😊🙏
@JustPlaneCrazy
3 жыл бұрын
Get it done. Thanks for watching don’t forget to share away and good luck on the repaint
Superb A+
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching and don’t forget to share
Awesome idea Brent 👊👍
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Share away
SWEET!
@JustPlaneCrazy
3 жыл бұрын
Thank u
Thank you very much for sharing this trick with other modelers . cheers from Austria
@JustPlaneCrazy
2 жыл бұрын
Your welcome. Don’t forget to share the channel and check me out on Instagram. Cheers mate!
I've used Talcum Powder to flatten glossy clearcoat, never thought to try this though. I'm curious about the durability though, either way...... Pretty slick!!
wow thank you to discover this trick
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching. Don’t forget to share.
Very cool indeed. Gave you the thumbs up!
@JustPlaneCrazy
3 жыл бұрын
Thanks and thanks for watching
You just saved my Ass, been wanting to paint tri colours (horizontal) stripes on my Airline model, RED on top, blue in the middle and red underneath a TRI Colours process, you killed it mate and thank you Sir! :-)
Great review so easy I will be doing this trick on my next plane good job☺👍👍
@JustPlaneCrazy
8 ай бұрын
It’s amazing for sure
WOW!!!!
Holy heck, great tip, thank you!!
@JustPlaneCrazy
2 жыл бұрын
Thanks don’t forget to sub if you didn’t share the channel to your friends and checkout my Instagram and or Facebook official page. Thanks for watching and enjoy
Talk about that super healthy cornfield in the back.
@JustPlaneCrazy
3 ай бұрын
lol. Yeah. We have a few around here
K, the laugh sold me. Hahaha Well done! :)
@JustPlaneCrazy
2 жыл бұрын
Lol. Thanks for watching
Thanks for sharing. I’ve been having paint peeling off my models with Tamiya masking tape. Super frustrating! I am going to experiment with this.
I’m just getting ready to do a whole repaint and going to try to remove the old paint and because it was going to be multi colored knew I would still get the peeling. Definitely going to try this out.
@JustPlaneCrazy
Жыл бұрын
Good luck
great tip ! I used ''Deluxe Foam Armour' to protect the paint/foam edges of the canopy, fuselage and battery hatch The problem is that it was a little tacky and would stick. Talcum powder cures the stick....
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching and sharing your experiences.
Boy is that ever so slick. Why am I just seeing this now LOL. Well better late than never I guess😂
@JustPlaneCrazy
8 ай бұрын
That’s true
Wow, what a game changer. I need to try this out. Thanks buddy, I guess after we can minwax to protect the paint 👍🏻👍🏻👍🏻
@JustPlaneCrazy
3 жыл бұрын
You got it. Good luck with your next one
OMG where were you 4 planes ago?! Lololol. Brilliant.
This has got to be one of the RC tips of the year. And how the hell did you know that I stuck my blue tape to my shirt before I used it???😂
@JustPlaneCrazy
8 ай бұрын
Lol we all have. I needed to find something better. For sure this has been a game changing trick.
Great tip ... What kind of paint works best
@JustPlaneCrazy
3 жыл бұрын
On epo any. I love krylon, rustoleum 2x and latex from Home Depot or Lowe’s shot through an airbrush 50/50 with water
Hey bud, we been doing this for 10yrs now....Im just kidding, Very cool to know. I've tried all the techniques you motioned and then some.Great tip Thanks.
@JustPlaneCrazy
3 жыл бұрын
Lol. Someone will always come out of the wood work and say that,,it’s a given. Still laughing. But it always gets my attn when I start reading it.
@PhilBender612
3 жыл бұрын
@@JustPlaneCrazy LOL..ya Im still laughing after writing it. There will probably be at least one guy that will say it... I'm glad you thought that was funny. thanks again for the tip.
Recently discovered your channel sir and I'm so glad I did! I will be painting my own AL-37 here in a week or two when I get back off the road (truck driver), so this is perfectly timed. Subbed!
@JustPlaneCrazy
4 ай бұрын
Thanks for watching. What scheme?
@supramaniac502
4 ай бұрын
@@JustPlaneCrazy it's not my bread and butter but I do pull a lot of freight for FedEx so since that was a plane I could get up close and personal with and take pictures, I figured I would go with that livery. Waiting on my Callie graphics order. Can't wait to get her in the air!
@JustPlaneCrazy
4 ай бұрын
@@supramaniac502 best of luck. It will be awesome
@supramaniac502
4 ай бұрын
@@JustPlaneCrazy thanks brother! FYI, you and my son have two things in common. Your name, and your love of RC aircraft. He's just as eagerly awaiting the maiden as I am!
I just posted this in RC Foam Fliers on FB.
@JustPlaneCrazy
3 жыл бұрын
Thank you. Sharing is always appreciated
Just getting ready to paint my foam plane trying to figure out how not to peel off paint .Thank you so much.
@JustPlaneCrazy
2 жыл бұрын
Your gonna love it. Good luck. What are you doing a repaint on?
@michaelwagner2925
2 жыл бұрын
@@JustPlaneCrazy you know when I was younger had a hobbyzone super cub and use to fly it at the firestation.Im retired now put in 35 yrs.Im 72 but when I fly I'm just a kid again.Still have the old girl.removing the guts and rebuild her with new parts fuselodge ect.Want her orange and yellow.You think I should sand new foam parts a little.
@JustPlaneCrazy
2 жыл бұрын
I would not sand the foam. I use minwax poly first then primer. Then sand
@michaelwagner2925
2 жыл бұрын
@@JustPlaneCrazy ok thanks
Thanks you saved me a headache
@JustPlaneCrazy
Жыл бұрын
Glad to hear. Thanks for watching
Krylon fusion is hands down the best paint for these or any repaint if you can find your color. I have used it on most if not all my repaints including my military jets. Your new technique appears to work really well, I have a repaint coming my friend Ill have to give it a try!
@funflier57
Жыл бұрын
Krylon Fusion doesn't attack the foam???
@JustPlaneCrazy
Жыл бұрын
Not at all as long as it’s EPO. Pretty much ever edf made today is.
@funflier57
Жыл бұрын
@@JustPlaneCrazy THANKS!
@meazy451
Жыл бұрын
Rust-Oleum 2x works flawlessly as well. And it's cheaper.
Damn Brendan gone and changed the game!
@JustPlaneCrazy
3 жыл бұрын
Dude. I hope so. Share away
@ret737
3 жыл бұрын
For real!
Cool, this should work for my foamboard builds as well as I often use tape to strengthen control surface hinge areas and when I pull of the masking it often rips the paint off the tape over the hinge
@JustPlaneCrazy
3 жыл бұрын
Perfect idea. Thanks for commenting. Don’t forget to share the vid in the foam board world
@AidanMacnamara777
3 жыл бұрын
@@JustPlaneCrazy What is the foam board world?
@JustPlaneCrazy
3 жыл бұрын
If you are part of any groups or forums or threads that deal with building foam board. Or maybe just a group of fellow builders. It helps when my channel gets spread amongst your fellow fliers. Thanks again for watching
@AidanMacnamara777
3 жыл бұрын
@@JustPlaneCrazy Ah, got you, good idea, will do that
WOOOOOO HOOOOO!! 🤠🤠🤠🤠🤠
This is genius!!! I normally mask my planes then might take a couple days before i paint them. Using this method do you need to paint right away or can you apply the baby powder, mask, then wait a few days?? Thanks man!!!
@JustPlaneCrazy
3 жыл бұрын
Thanks for watching and don’t forget to share. What the powder is doing is perfectly coating the tape to its lowest adhesion point. I don’t think it will matter how many days you let it on there. When I pull the tape off it feels like a post it note.
A great tip! Thank you for sharing. Does this also work on GfK?
@JustPlaneCrazy
6 ай бұрын
Gfk?
@willipreugschat
6 ай бұрын
@@JustPlaneCrazy in german: glasfaser verstärkter Kunststoff ( glass fiber reinforced plastic). A very smooth surface.
@JustPlaneCrazy
6 ай бұрын
@willipreugschat thanks. Than yes
@willipreugschat
6 ай бұрын
@@JustPlaneCrazy OK thanks. Will try it in the future.
Good tip! I noticed in the test part you rubbed it over the entire area and painted right over. Does this affect how the pain sticks or change the shade?
@JustPlaneCrazy
Жыл бұрын
In my testing it made no difference and absorbed it.
@BDTennessee
Жыл бұрын
@@JustPlaneCrazy thanks for the info!
Great Vids just ordered the AL37 Im planning on doing the American Lines version with the older livery the natural aluminum. What paint would you recommend. Or could I possibly skin in with like the heat shrink material used to cover sail planes. Ive seen some material that would give that brushed aluminum appearance. Just an idea?
@JustPlaneCrazy
2 жыл бұрын
I use Rustoleum 2x. Check out the playlists on my channel for more foam painting info
sticking the tape to your shirt once before you stick it on your plane does the same thing ;)
@JustPlaneCrazy
Жыл бұрын
Try it. You will be surprised in the difference between the two
@Kiromos
Жыл бұрын
@@JustPlaneCrazy my preferred method for a clean cut line is to put down a little bit of the base coat first over the tape's edge to seal it, then add your stripe and peel. That makes the perfect cut line.
Thanks for the video guide dear, i see that you paint on the baby powder...i need to clean the area before painting? Thanks and have a nice day!
@JustPlaneCrazy
2 жыл бұрын
You can wipe it off the f you want but it’s so light you can paint right over it
@vemadventures
2 жыл бұрын
@@JustPlaneCrazy ok thanks for the advice. I try to mask for paint my Al37 with the powder, many thanks for all!
Try that on the already peeled areas like you did with the first two pieces of tape. Do you think the results would be the same
@JustPlaneCrazy
3 жыл бұрын
I think on paint that’s already peeled anything will continue up to peel it up. But that wing was solid paint when I started. Every piece I tested had the same results. The engine nacelles at the end of the vid were a true at the moment test and result
I’m new to the painting game, do you remove the tape always right after you finish painting, or is it better to let it dry for a bit to avoid rubs & streaks? Thx for info
@JustPlaneCrazy
2 жыл бұрын
Either way works
😂that’s Awesome!!
Just curious. Does the talcum powder trick work as well with brushing on paint?
@JustPlaneCrazy
2 жыл бұрын
There are different methods for creating lines that don’t bleed through for brushing. The powder technic is used is used to help create the line and then be able to remove the tape without pulling g up the paint under it.
@iramiller2389
2 жыл бұрын
@@JustPlaneCrazy Thanks. I am about to brush paint some invasion stripes on a foamy P-47 Razorback and and wondered how to do it without pulling off the existing paint with low stick tape
🤯👍
Please tell me what the paints are your using I like to know especially the green
@JustPlaneCrazy
Жыл бұрын
It was a krylon color don’t remember exactly
@JustPlaneCrazy
Жыл бұрын
I am sure it’s in the build vid somewhere
Can you use acrylic airbrush paints on epp?
@JustPlaneCrazy
8 ай бұрын
Yes. It’s not the paint that’s ever the issue It’s the propellant used in the cans
@squaddingquads
8 ай бұрын
@@JustPlaneCrazy ah perfect what about clear coating?
@JustPlaneCrazy
8 ай бұрын
I prefer water based minwax if it won’t be getting wet
@squaddingquads
8 ай бұрын
@@JustPlaneCrazy I love inn the UK, unfortunately all we have is wet 😂
Doesn’t this lower the adherence of the paint sprayed on top of the talcum treated areas???
@JustPlaneCrazy
3 жыл бұрын
It’s such a small amount your using and really focused around the tape area not the paint area. I saw no difference in the paint that absorbed the powder
do you pull the tape off while the paint is still wet or wait until the paint is dry?
@JustPlaneCrazy
2 жыл бұрын
I have done both and it works perfect
@sailr
2 жыл бұрын
@@JustPlaneCrazy thanks. good to know.
how paint balsa model planes with cover paper
@JustPlaneCrazy
Жыл бұрын
Actually doing a build now. Eventually that will be one
I just tried the baby powder trick and pulled off all of my paint as if I had stuck on duct tape! Very disappointed, but to each their own. Maybe I need to rub it in more, I don’t know.
@JustPlaneCrazy
7 ай бұрын
Yeah not sure. I refinish all my models this way with no issues. I can’t tell you how many hundreds of others have tried it with amazing success. Try it again. Maybe you just have a really poorly painted plane prior to you getting it. Not sure 🤔
Off the subject a bit .... but which airline has lime green planes ?
@JustPlaneCrazy
Жыл бұрын
Custom build for this customer. His daughter builds 🦖 for the likes of people like Disney
So why not just wipe powder over the whole plane then , since it will not harm the paint ?
@JustPlaneCrazy
3 жыл бұрын
No point in doing anywhere u aren’t masking off
@t33jetman
3 жыл бұрын
@@JustPlaneCrazy But I do a lot of masking
@JustPlaneCrazy
3 жыл бұрын
Then go for it. I seen no difference in paint where there was and wasn’t powder
I just ordered my AL 37 I am so intimidated about not being able to paint it .
@JustPlaneCrazy
Жыл бұрын
Don’t be Acetone is your friend. The paint will come off if needed. Thanks for watching
@jerrya1356
Жыл бұрын
@@JustPlaneCrazy thanks sir.
Sorry but it is a good idea however I would remove the baby powder fro. The area that is being painted, by leaving the baby powder your messing with the moleculer adhesion, ie the paint may stick for a little bit but won't be on there forever
@JustPlaneCrazy
3 жыл бұрын
I get what your saying but saw zero difference in the area that was or wasn’t painted. The paint absorbs what’s there and it stuck just fine. It’s not like your coating them whole plane with scoops of powder. You focus on the area that’s getting tape. Multiple planes, multiple tests
Wonder if this could be done with corn starch... for less of the fresh baby smell...
@JustPlaneCrazy
Жыл бұрын
Lol. Give it a try
@kolbevilla
Жыл бұрын
Someone else commented and said cornstarch works too.
I need help painting a plane do you paint them for folks ?
@JustPlaneCrazy
Жыл бұрын
I have done many projects for guys but the time I get into them far exceeds what I can charge. So I no longer do it. I am now focusing on building some of my own projects
@jerrya1356
Жыл бұрын
@@JustPlaneCrazy okay I totally understand, any advice on what kind of paint and where I can find them I ordered some graphics from Callie , I want to paint it as a Southwest Airlines any advice would be appreciated.
@JustPlaneCrazy
Жыл бұрын
I have done many vids on answering those questions. He is a link to one set of playlists. Jurassic Park AL37 kzread.info/head/PLwAtpGIpRcU7TeHlLbKw7gm9XNsWC54eS I also have the toy story one and the avengers on on my channel. I like using Rustoleum 2x. Available at Home Depot
@jerrya1356
Жыл бұрын
@@JustPlaneCrazy thanks a lot for the info, I am going to start getting those things to make it work not sure how long it will take but I will start the journey as soon as today .
@JustPlaneCrazy
Жыл бұрын
The more time you take the better it will look
Please sell me that Jurassic Park AL or are you willing to do another one? I am being serious.
@JustPlaneCrazy
3 жыл бұрын
It’s worth discussing. That build was for a fellow member and the vids will be released over the next three weeks. Thanks for watching and don’t forget to share away
OH shite....! I have just stripped a 1.2m p-51 about 2 weeks ago... 🤬
@JustPlaneCrazy
2 жыл бұрын
Lol. A day late and a dollar short😝😜🤪
@Nothinglefttosay
2 жыл бұрын
@@JustPlaneCrazy not happy bro..! Really wish I had waited until I saw your video.. 😳🇦🇺
@JustPlaneCrazy
2 жыл бұрын
Dude. Wait until the next paint unveiling at the end of this month. Your REALLY REALLY gonna wish u waited. It’s so impressive I scare myself.
@Nothinglefttosay
2 жыл бұрын
@@JustPlaneCrazy keep me informed bro..! 🇦🇺🤘✊
The KZread name deserves a subscribe from me 😂🤦♂️
cocaine for planes
Yeah, but does the PAINT stick if powder left where you’re painting?
@JustPlaneCrazy
9 ай бұрын
No issues