That's how all cars should come from the factory. I always wanted to do the rocker panels and fender wells on mine. Rock chips and scratches are inevitable in those areas.

I don’t know how I feel about the bed liner I prefer the nice glossy finish but like always it looks amazing

I always had this thought that all black car with a red bed liner engine bay would look cool with a fully chromed out engine. In my mind in, it would look like a jewelry box

Hey bro quick tip on the threads in the engine bay when painting. To advoid having to clean all the bolts after you take them out. Use the little foam ear plugs. Squish them and set them in the tread holes then paint and remover befor dry with needles nose plyers. 👌 eBay can get bulk earplugs really cheap

Thanks for killing it brother!!!

Looks kinda dope like putting wrinkle red in the engine bay I think I would was the entire under body sprayed with it as well awesome video as per usual thanks bode 🥰

I've reduced raptor liner about 20% and put it down with a 2.0mm primer gun, results always look good.

@123suzukisamurai

9 ай бұрын

What do u thin it with?

@dropinbiking92

9 ай бұрын

@@123suzukisamurai reducer

Love the content bode. Keep up the great work you do top quality work.

Wow, that's great stuff, Adam. I like this texture. Thanks for sharing. Have a great weekend, Dutch regards, Nico.

Good job bro😎 i jst finished my bay painted Red too thanks for the vids 👍

I never thought of doing something like that to an engine bay, but it's a great idea & it turned out looking great as well!

Thank you for the information and I know more now than I did before, hopefully I cam get my truck done.

You did real nice job on it. And explained it really clear we can understand it.great job, I am thinking about doing on a 67 chevy soon

Ive used that stuff painted my integra and a friends truck its an awesome little kit

Super cool result - looks easy to do as well.

This is what Kyle should do to his engine bay when he comes back with a much brighter red though this came out kind of orange to me or maybe its the camera either way it came out killer, I really like the look of the Liner.

Most definitely would use it. Did my whole Jeep Cherokee before. Great stuff. My 08 Tahoe is next!

Turned out great!

Yo that intro hit home! Coming up quick, little girls been practicing her lines hard. Can't wait to watch it.

I've always wanted to do a full car Nice work

Looks like red valve cover crinkle paint! Looks good! 👍🏽

Definitely looks good

Thats it, I've turned the bell on for all notifs! Love the content!

I always used the pray bomb technique for the guide coat, 97 cent can of spray paint and it always worked well!

Your the man Adam!!!! Keep on rockin!!!

I coated the inside and out of my dually fenders to protect them from chips etc. Sanded outside than primed and painted them. Worked great.

I think the car would look great with the whole thing raptor lined ! Not to mention the benefits you would get from weather and corrosion etc …

looks great

Awesome video Great work!

Brian rolls up mic’d and ready 😂

@BodeVision

11 ай бұрын

That’s filming lol

The car is going to look killer bode awesome job as usual

Being that I live in the northeast, I was thinking of raptor lining the hole underside and wheel wells of my civic. Looks easy to apply. The hard part is tear down and prep.

I would totally do this on my project car 👍🏼

Durable wrinkle coat paintjob. It's the best. I've done 2 Cara before in raptorliner. Comes out amazing. I want to do my bike and the 2 cars I own now with colored on 1 and just black on the other .

It's definitely a feature I respect and love to see. Also has its purposes for sure. But my build style I probably wouldn't do unless I was doing track racing or rally.

Great video once again👏👏

I dunno why but I absolutely love anything with bedliner on it, love the idea of something that looks great but tough as hell. I want to apply the same on the exterior of a project car BUT with a more finer texture output than the usual heavy texture that off roaders use on crazy Jeep builds for example.

When I restored my 3000GT I did bedliner spray in the wheel well areas. I didn't use this system, I just used some rattle can Rustoleum or something, but same basic thing. I might look into the Raptor kit for the wheel wells for the Eagle Talon I am doing now.

I wait lile 10 to 15 mins. Used to say 30 mins but also says depending on humidity etc. We all do things diff. It looks great

Lookin good

Better content every video 😮

I would put clear coat over it to make it shine and pop more. Also I would do the wheel wells in black and the whole underbody as well.

I'm sort of on the fence about the finish in the engine bay, I don't think I would want it on my car but for what you are doing here it looks nice. You are progressing well with the bodywork though, thanks for sharing

Looks amazing.. Im not sure of the bed liner finish.... I really like the shiny paint

superb

Being from upstate ny, I am going to try to do as much bedliner as much as I can. I am building a winter beater k5 now so I don't drive my good one in winter

Love to do this with my ej1 but worried to do it myself

AS A SUPERVISOR AT MY JOB I REMEMBER CO~WORKER TELL ME "WHY DON'T YOU HAVE THAT MANAGER STANCE" I TOLD THEM ( WHAT STAND / STANCE YOU TALKING ABOUT ?¿?I'M YOO SUPERVISOR NOT A MANGER ) AND @3:43 THAT SURE WAS A GREAT EXAMPLE OF WHAT MY CO~WORKER DID SHE SURE MADE ME LAUGH BRAIN DID IT JUST RIGHT AND THAT ENGINE BAY CAME OUT AMAZING CLEAN EVEN NOT IT'S KYLE TURN TO BRING HIS EMPTY ENGINE BACK TO THE SHOP KEEP IT UP BODE ✌🏼OUT

That stuff is so durable

I want to do this to my dc5 now kinda.

I like bullet point, step by step. I'm hear to learn. Thanks for making this video.......I gotta knockout a 4wd Surbarban.........Yikes!

That 100k subz look good 👍

Kyle needs to do this to his hatch

🔥🔥🔥🔥

Ear plugs I find to be a great alternative to covering up bolt holes before spraying liner as well, won't have to clean the hell out of the bolts before reinstall and ear plugs are disposable and cheap. Just a helpful tip lol

@mikehatter1800

7 ай бұрын

Cigarette filters there on ground there everywhere perfect for threaded holes I use them when painting motor cycles

i have been building a widebody lifted da integra and have been contemplating on using the exact same stuff in the exact same color to paint my body. still not sure. think if i also build a exo cage i would for sure but not sure without it.

i wonder if you can flatten the tip a bit and get a wider pattern

Depends on how cleanable it is Can you clear over bed liner?

I’ve been waiting for someone to do this. KZreadr Tommy fyeah doesn’t do the bays bc he’s color matching to the outside of the gtrs but he does a black raptor lining in the wheel liner area and the rest of the metal underneath the front fender to protect it. If I ever pull the engine out of my truck this is what I want to do.

The raptor liner wouldn't have been my choice but I will say the fact that it is tinted red is cool. Once the motor and all the shit is back in the engine bay I bet it will actually look pretty cool.

I’d love to see you put a clear coat on top of that

It looks nice but my only worry is keeping it clean. When you think of bed liner in a truck bed it's always dusty because the texture holds onto grime and because it's a little soft and rubbery stuff sticks into it/stains it that way as well. I would bet it's not as temperature resistant as paint either and might crack or peel after a few years. That said sometimes stuff just works, hopefully you can update us on the build in a few years and see how it held up. Bedliner inside is just a win I think, so much easier maintenance. I would do it to my own car but idk how I would hide all the wiring that went under the carpet.

Damn bro this looks very sharp 👌 bed liner in the engine bay area that s fire 🔥 #bodesqaud #projectredhatch

How do you plan to color match the paint with the raptor liner, I would worry it would clash if the reds were off.

Adam love the work. Like to know if you would be willing to paint my 240sx.

Fuel

I am going to do the interior of my car white tint

You can thin the bed liner with Urethane reducer & Urethane activator will kick it.

Hell yes i would can u give me the paint brand u use for it plz ty

that looks awesome! my only question is raptor liner going to hold up over time to the heat cycles an engine bay gets from an exhaust?

@BodeVision

11 ай бұрын

Would you think this is less durable then a regular clear coat? Because engine bay paint is not rated to be high temp it’s always just regular paint

@jack_of_all_trades_52

11 ай бұрын

​@BodeVision raptor liner isn't all that durable anyway and whatever they use to make it wrinkle or texture may not like the heat. I wish I could have an engine bay as clean as one you would do with your attention to detail

@AJ_Irving

11 ай бұрын

@@jack_of_all_trades_52 it holds up fine to heat we use in on rally cars all the time for inner arch’s and floors underneath only issue I get is my exhaust tunnel discolours but temp is logged at 350deg Celsius at that section of system.

I am not a fan of the Raptor liner in the bay...but you executed it nicely as usual. Sometimes customers request some weird shit!

What type of primer did you use on top of old paint?

I did this to my ek 6 years ago girl ran stop sign hit me and bedliner held up made body stronger

Out of curiosity how far do you have to bring the paint down to bed line?

Damn that engine bay is going to be dope. If I had a chance I would go black. On my car.

That engine bay looks fire 🔥 #dadjokes Great vid as always my dood

Looks great but that’s going to be a nightmare to keep clean in an engine bay with dirt, grease and grime

Hey Adam...Kinda Off Topic Question for ya if you see this...I have some Polyurethane Rear Bumper Flares and I want add some extra structure to them and do some remolding maybe too...What material will bond to Polyurethane?....Fiberglass Milled strands stuff?....or will a BONDO Brand fiberglass repair kit work?....Any advice is Much Appreciated dude!!!!

I've considered it for my car, but I hate how much dirt always seems to get stuck in bed liner. Living in an area with red clay dirt everywhere, having nooks and crannies for the dirt to get even more stuck in would drive me to distraction!

Great video love your work but noooooooo to bedliner in the engine bay. Too late now though it’s in there forever

@DeBoSS212

11 ай бұрын

Itll be really difficult to clean

What’s your opinion on the Transtar paint line?

@BodeVision

11 ай бұрын

I really like transtar base coat as it always had great coverage for me.

I am building a overland civic I want to paint it with army green bedliner, would it be stronger with 3 or 4 coat?

@BodeVision

11 ай бұрын

4 coats isn’t going to necessarily be better then 3. I would look into the dts sheet for the product that you’re using

@rallyvic4176

11 ай бұрын

@@BodeVision my goal would be to make not only the paint super resistant, I would love to make it absord some little hit to help keeping it as much dents as I can. I don't know if this is the best product but I tough that could be a very good option

Normally you use 3 or 3.5 oz of base coat to tint it …. That way you have perfect color match with the rest of the car ….

@123suzukisamurai

9 ай бұрын

So it mixes well with ppg paint. Was wondering if you had to buy their tinted or not

@ZILAwelds

9 ай бұрын

@@123suzukisamurai yes the regular deltron or Omni not their water based stuff

Can you apply the bedliner in white and paint with normal paint after?

@BodeVision

11 ай бұрын

I was wondering the same thing. Once it’s cured I would think you could. Not 100% sure though

@95TurboSol

11 ай бұрын

It seems like you could but wouldn't it be prone to chip though? I think it might defeat some of the purpose of bedliner being tough.

Always use 🦎

Just curious did you sand down the engine bay before spraying. I want to do my bed on my truck. And everyone said i have to sand it first to make it rough.

@somdood3292

11 ай бұрын

paint adhesion is always affected by whether or not you rough up a surface first. If you dont sand the paint/primer has less surface area to grab onto; therefore its more likely to peel or crack eventually as opposed to properly bonding and becoming one with the surface

@BodeVision

11 ай бұрын

If your bed is clean and it has glossy paint on it you’re going to want to dull the surface. Even getting in there with a scotch brite and some elbow grease will do the trick

@davidbranly7919

11 ай бұрын

@BodeVision thanks man I appreciate it

@davidbranly7919

11 ай бұрын

@@somdood3292 thanks man.

clean looking, i'd do it to mine. not a fan of acura painter. nice guy, but you don't need him.

I’d do it on mines

Looks Amazing! Not a fan of the bed liner finish...

They sound the same but look different 😂

I disagree @ 4:54 some of us absolutely love all the fine details you show. Maybe a second channel with more in depth stuff 🤷‍♂️? Some of us could just watch this kinda stuff for hours and hours

@BodeVision

11 ай бұрын

That’s a solid idea. A channel dedicated to the details

looks orange

Just show the car being painted with three bed liner like the title says

So much orange peel - smh my head. This was a joke by the way 😄

It’s not gonna match the color of the car when It’s painted

What a waste of an empty engine bay. Raptor liner isn't all that durable either, it scratches almost as easy a paint does.. with all your attention to detail what a missed opportunity to have a clean engine bay.

Did this to my civic when I when’s K best paint protection and looks glossy still 🦾🤘🏽

I didn’t like paint society, until he finally petted the dog ❤

Instead of sueing bolts to protect the threads and having to take them out while it’s still wet you can use ear plugs they work a lot better for stuff like that

They offer me a Hummer2 painted professionally in Connecticut. Will you buy it? Im not sure about resale if I decide to sell it.

@PelukaUSA

8 ай бұрын

With bedliner type pait, yellow