Great info from n this video. A very common problem in the States as well

Thank you for this. I bastardised another of your tips for this problem. After cleaning I mixed a hard stop of fine filler and emulsion and skimmed / filled the wall, followed by a very light sanding. The result was perfect and was paint, not paper. Surprisingly quick too. So thanks x 2

@PaintingandDecorating

Жыл бұрын

Your welcome thanks

Great video, just what I was looking for 👍👍

thank you you are epic of knowledge thank you

Ace work. Thanks for the tips!

@PaintingandDecorating

Жыл бұрын

Thank you

done a whole house that like this once ,was glad to get it done ,but it was a propper ball ache ,most people dont realise whats involved in painting ,especally with regards to bare plaster

@PaintingandDecorating

Жыл бұрын

Totally all preparation.. painting old is usually quick and easy.. but new needs more work..

I have just exposed a wall like this. Your video is super!!! I have really learned a lot to tackle this problem.

@PaintingandDecorating

Жыл бұрын

Thank you glad we can help. 👍

Toupret fine surface filler is a game changer for very smooth fine dents even like different thickness paint or even bad plastering, saved the day on many an occasion. B and Q do large 15kg tubs. Toupret is a no grining/flashing filler

@jigsorla9307

Жыл бұрын

Thanks, I think it's called Toupret smoothing filler on the 15kg tub.

What’s the dilution ratio for a mist coat? Thnx Sam.

If your paint mapping is quite thick from multi coats I would advise after scrapping/sanding and applying the diluted pva skim the wall with a fine filler. I use KNAUF FILL AND FINISH LIGHT. It's easy to apply with a large spatular or filling blade, and when dry easy to sand flat. This will ensure a proper flat wall surface if you want as flat a surface as possible. Large tubs of KNAUF fill and finish are around £40ish in the uk.

A good few years ago, I faced this horrible predicament after deciding to rip the wallpaper off in my bedroom. I was in tears, stumped over what to do about it and there was no way i going to skim the walls. In the end i made my first attempt at lining the walls. I would have tried this method if I knew of it.

@PaintingandDecorating

7 ай бұрын

Yes sometimes what looks like an easy job can turn into something mammoth. Thanks

Painted my entire house interior in Leyland contract Matt, it's the worst paint I've ever worked with, flaky, chalky, peeling garbage after a few months with prep

I've just bought a 5 bed 1972 house that's wallpapered throughout 😅 - I'm tempted to take the walls down and re-plasterboard, it'd be much quicker haha

@TheNomadicTrader

3 ай бұрын

Update: stripping the walls has battered the plasterboard but due to the wall construction (solid plasterboard not stud wall) I'm having to plaster everything. Almost done, having learned to plaster myself. Jobs coming along

@touristtam

24 күн бұрын

Kudos

I've found best solution steam off this old paint with a wall paper stripper let plaster dry repair any damage plaster.Reseal walls and repaint and hey presto beautiful new walls just like new the professional touch .

I know you said you’re wallpapering it but if you were to actually paint a wall with so much mapping you’d be better to line it or skim coat it or even Mirka it away? Not a diy’er but a decorator?

Try a 12" squeezy mop and bucket, "paint" the wall with water, wait 3-5 mins then wet again, wait another couple of mins, then use a 12" wide scraper, flick the paste muck onto sheets of newspaper. Then repeat. The 2nd wash and scrape will really get it off. Finish with a wet sponge to get any residue. On concrete floors, no need to cover with sheets, upstairs thick, old towels are recommended to catch the excess water from the two soakings.

i have an issue with paint mapping on my walls after stripping off wall paper. some panels i had virtually none and other its fairly bad like 50/50 with remaining old primer and plain drywall. Just for clarification. Mist coat is a priming coat yes? and the PVA primer you are using is diluted with what? Is the dilution 2 to 1 or 5 to 1? Finally, you gave the option of just doing a priming (mist coat) instead of the dilute PVA step correct? I've read that PVA is really more for new drywall and then you put another primer over the PVA which seals the drywall. Then you put your one or two coats of paint over that. Is this a correct sequence. there was some issue with people saying you should not put PVA on a wall that has already been painted. Sorry for all the questions but yours is the only video i could find regarding the paint mapping problem so well done. i think i was worried my only option would be to put on a skim coat. Thank you.

If stripping a vinyl wallpaper leaves behind a good sound backing paper, is there any harm in putting new wallpaper over the top - treating it as a lining paper.

@MrVocalist101

4 ай бұрын

Zinnser peel stop is good for this, did it a week ago and came out perfect, backing paper was in great shape so I just stabilised it with said product and new paper went on lovely.

Builders should be banned from painting inside houses (joke but no joke). They always seem to end up causing problems like this down the line (same in my house and I have had to strip a few walls down to bare plaster but this is very time consuming and noisy for the neighbours).

👍👍

@PaintingandDecorating

Жыл бұрын

Thank you.

This is pretty much how I was taught to deal with this. Thankfully tech has moved on a great deal and as pro's we can work smarter and not harder. I probably wouldn't have used diluted PVA to seal. I was taught in college and by my first employer to never, under any circumstances use anything with vinyl in it to seal bare plaster. My go to now is zinsser peel stop or gardz, but if it works for you guys then go for it. Great channel 👍

@ProfessionalPainterDecorator

Жыл бұрын

you're correct. PVA shouldn't be used, never taught that in college. peel stop or Gardz is ideal, Gardz being alkali resisting give you a good surface to work on.

@AspireDecorating

Жыл бұрын

@@ProfessionalPainterDecorator Hi again Phil, yep absolutely loving the gardz at the moment. Very reasonably priced too. 👍

@craigwilliams7516

Жыл бұрын

Have u tried diluted PVA?

👍👍👍

@PaintingandDecorating

Жыл бұрын

Thank you

Stanley blade will shift it

Sod that I will just wallpaper it with some superfresco

Please explain what’s a “miscoat. “

@fhellman

Жыл бұрын

in the UK a mistcoat is a coat of thinned down cheap emulsion that goes on bare plaster surfaces. The idea is to seal it. Then it's ready for decorating. But in the video he opts to use diluted PVA for the same purpose.

@spencercolgan

Жыл бұрын

@@fhellman thank you!!!

Or...5 minutes with a mirka and its completely stripped off and flat. No cleaning of paste, all the paints gone and the wall is flat. Cost you 600 odd quid to set up though so not a diy solution but pro's... No brainer.

@NiktheEnglishGreekCypriot

Жыл бұрын

I just spent 1700 on a bundle. M class extractor, and the deos and deros. Took a bit of getting used to as they kept bouncing off the surface but love it now.

@MrJimtimslim

Жыл бұрын

@@NiktheEnglishGreekCypriot I'm fully festool now actually. Just say mirka as like a generic name for that type of sander. I have four of them with various extractors. Irreplaceable now. Could not live without

@NiktheEnglishGreekCypriot

Жыл бұрын

@@MrJimtimslim yeah get ya mate. I was debating festool but I spoke to a few of the decorators i see in crown who all regretted the festool after trying mirka. Horses for courses though. Only downside with mirka is you have to hold down the trigger which can get tiring

@MrJimtimslim

Жыл бұрын

@@NiktheEnglishGreekCypriot there's not a lot between them. They're all good.

@NiktheEnglishGreekCypriot

Жыл бұрын

@@MrJimtimslim oh yeah for sure. In reality a dustless sander is a dustless sander. I got by for years just connecting them to my wickes hoover. Plus side is charging more for the better quality of work in a shorter period of time

Just seal it with Zinsser guardz or peal and seal

@gray3553

Жыл бұрын

Agree Steve, I never use PVA.

Brilliant...

@PaintingandDecorating

Жыл бұрын

Thank you..

Echo echo .. . Testing testing...

Stop using pva Zinsser gardz all day long

What is water to pva ratio?

@PaintingandDecorating

8 ай бұрын

Just thinner than milk and you're sorted. Thanks

Remove vinyl or film of first layer wallpaper. Then dash of stripping solution or Fairy with hot water.. towels down to catch water on wall. Use roller and dip into the solution Roll wall with it and don't be shy. Wait 5 minutes an comes off easy. Then sand the life out of the wall. Fill any areas needed Then seal with zinnzer GARDZ or if your lucky if it isn't bad Zinsser BIN. Boom. Water doesn't activate shellec paint. Neither does oil.

Lol just use a orbital sander with p80 sandpaper.... And then use like p120 then the p240 sandpaper! Seriously... 🤣🤣 just done my bedroom

@svmwasthesheet1971

Жыл бұрын

I was hoping to see this comment, exactly what I'm thinking to do.

It's not the only way,zinsser guardz would smash that,times have moved on work smarter not harder.

just seal with a solvent alkali resisting primer then surface fill pva isn't alkali resisting

@PaintingandDecorating

Жыл бұрын

It's okay because no salts are present..

Plaster skim, by the time you face fill etc

@PaintingandDecorating

3 ай бұрын

No it's a lot cheaper this way.

@TheWESTSIDE1967

3 ай бұрын

@@PaintingandDecorating but it won't be perfect as you need to face fill twice to even out , one quick skim & like a sheet of glass, done loads over 38yrs as a painter decorator

@TheWESTSIDE1967

3 ай бұрын

@@PaintingandDecorating each to there own

Cowboy here again with PVA. No paint manufacturer ever suggests this. Sand. Seal with diluted paint

@PaintingandDecorating

Жыл бұрын

Did you know they add PVA to paint for better adhesion.. if you don't know then don't use, leave it to the professional who understand the materials they are using. Thank you

@losttheplot26

Жыл бұрын

@@PaintingandDecorating hahaha. Professional. No paint manufacturer ever suggests that you use PVA. Plaster seal is a mist coat of diluted trade emulsion 30%

@neekoly2566

Жыл бұрын

@@losttheplot26 Just because they don't suggest PVA doesn't mean it's not a good idea

@GhostsOfTheAngelcynn

Жыл бұрын

​@@losttheplot26 you wouldn't get a Ford car salesman suggest you buy an audi would you. It's called business.

@losttheplot26

Жыл бұрын

No paint manufacturer has ever suggested such tripe! Yeehaa

wow pva A

Difficult to understand the first 1/3 of your video, plus sound of 'ocean' in background... then sanding noise, etc.

Peel stop mist coat not pva

@PaintingandDecorating

Жыл бұрын

What do you think painters did before peel stop? waste of money peel stop.

Or just stop all the messing around and get it skimmed with multi finish plaster and get a perfect new wall back !

@ka5269

7 ай бұрын

How much will that cost, though?

@DANMCMAHON08

7 ай бұрын

Hardly anything in it you will find decorators always find a way to try and bring the wall back to life with it be lining paper or filling and sanding as they can’t plaster ..me personally I can do both and plastering is the easiest and better finish 100%. The problem with this particular method in this video is you’re still not going to get a perfect finish !!!

i have been painting 44 years . if i worked like that i would have no customers. you are what i call a hobby painter.

@SunnyvaleTrailerParkSupervisor

Жыл бұрын

Its funny how everyone in the comments is a pro and has been for years. Gtfo and let us see your videos then. Your what i would call a fukin knob head

@jenschannel5324

Жыл бұрын

You might have been doing the job for 44 years but that does not make you an expert. You might be crap

@neekoly2566

Жыл бұрын

@@dfar2303 use Zinsser gardz, let it dry. Paint over

@I-am-SaltyPeanut

4 ай бұрын

Let’s see your videos then. What should we be doing then?

@MrILikeBreadsticks

4 ай бұрын

He even talks at 0.5x speed