Please feel free to leave a comment. Thankyou.

@kevinguyatt9128

7 ай бұрын

very helpful understand the prepping and how important it is thanks learnt a lot

@Inexteriors

7 ай бұрын

@@kevinguyatt9128 Thankyou for watching buddy.

Concise and well described. No wasted time! I love it!

@Inexteriors

Жыл бұрын

Thankyou very much.

Excellent video, thanks for showing us your full process.

@Inexteriors

9 ай бұрын

Thankyou for watching.

Explained perfectly, thank you!

@Inexteriors

Жыл бұрын

Thankyou Very much.

Beautiful work and clear instruction. Thanks!

@Inexteriors

Жыл бұрын

Thankyou.

Great stuff. I'm almost there, just needed this to make sure I was doing it properly. Thanks!

@Inexteriors

Жыл бұрын

Just do your best and it will be ok. Thankyou very much.

Excellent mate thank you I'm now going to watch your video on how to cut in.

@Inexteriors

2 жыл бұрын

@Christopher Phealan . Thankyou Very much bud, Hope it helps.

Brilliant mate

@Inexteriors

Жыл бұрын

Thankyou Very much

This is the kind of instruction I feel like I would get in my first week on a jobsite. This is masterfully explained and edited. I'm getting ready to do some light restoration work on a midcentury home and am sure I will be back for more advice.

@Inexteriors

Жыл бұрын

Thankyou Very much for your kind comment.

This guy is an artist!

@Inexteriors

Жыл бұрын

Thankyou Very much.

brilliant thank you so much for sharing!

@Inexteriors

Жыл бұрын

Thankyou very much for watching.

Good man stevie

@Inexteriors

2 жыл бұрын

@Dan F . Thankyou.

Nice work buddy

@Inexteriors

2 жыл бұрын

@Matthew Bohney . Thankyou very much bud.

Thank you so much for this video. It's beautiful now. I wish I could do it like you do. ❤

@Inexteriors

9 ай бұрын

Sorry for late reply, been on holiday and the internet was very poor, As long as you you do your best it will be ok, thankyou for watching the video.

Great video, best one I have watched so far on this topic, straight to the point and informative 😊

@Inexteriors

Жыл бұрын

Thanyou very much.

Just found your videos….thanks for being so clear and precise…ready to attack the hallway now!

@Inexteriors

2 жыл бұрын

@Lukas Calvert . Thankyou very much. Best of luck with your project.

Nice one

@Inexteriors

2 жыл бұрын

@Mark Crotty . Thankyou very much.

Thank you! I needed this!!

@Inexteriors

6 ай бұрын

Thankyou for watching.

Great instructions! No messing about, no bullsh*t, just good, clear explanations. 1 new sub. I will be bingeing your vids as I am starting decorating my flat soon. 👍🏻

@Inexteriors

Жыл бұрын

Thankyou very much for your support.

Thank you 😊

@Inexteriors

Жыл бұрын

Thankyou for watching.

Thank you!

@Inexteriors

Жыл бұрын

Thankyou for watching.

Thank you for your tool list. I bought many from your Amazon shop, so hope you get a cut 🙏

@Inexteriors

2 ай бұрын

Thanyou very much, i do get a small commission. Thanks for your support.

Well explained thx you so much mate

@Inexteriors

Ай бұрын

Thankyou for watching.

Brilliant video - subscribed! ❤

@Inexteriors

2 күн бұрын

Thankyou for your support.

Progress not perfection ❤

@Inexteriors

Жыл бұрын

Thankyou.

@gypsygem9395

Жыл бұрын

Loved that, was just what I needed to hear!

Excellent video and you re good teacher. Is it the same kind of treatment after removing ceiling papers? If we see paper tapes on ceiling cracks after removing the ceiling papers, is there anything we should be aware of? The taped cracks look flat though. Many thanks

@Inexteriors

Жыл бұрын

It would be the same process on a cieling. Not sure what you mean about paper tapes on cieling cracks. lol

Great video, i have some very good wall paper in my hallway can i just paint it with 2 coats if i fill and glue any defects , thankyou.

@Inexteriors

Жыл бұрын

Thankyou for watching, This video will help.kzread.info/dash/bejne/qH2Fxa5yna24oto.html

Try toupret smoothing filler blue large tubs B and Q ,this along with all toupret range the best fillers it doesn't grin through paint.

@Inexteriors

Жыл бұрын

Will do, are they a bit harder to sand.

Hi love the video. I've just stripped the wallpaper in my room, do I need to prime the plasterwall before I paint it with matte white?

@Inexteriors

Жыл бұрын

Thankyou. If its bare plaster you need to mist coat it with a thined down matt paint, the mix is 70 percent paint 30 percent water.

Great video mate. Is there any reason you don't use an electric sander for the walls?

@Inexteriors

Жыл бұрын

Thankyou very much, just never have. Maybe i should try.

Hi Steve, having just watched a bunch of your videos as i progress my way through my delightful 19070's semi. I've just stripped one of the bedroom walls, multiple layers of wallpaper and now also have a flaking layer of old paint. How best do I tackle this stubborn paint layer in prep for fresh paint or probably a skim layer then paint? Cheers

@Inexteriors

2 жыл бұрын

@Gus Cowley .Give ithe loose a scrape and a sand, then give it all a coat of paint, then you will see what needs fine filling, maybe first fill anything you can see before you put the first coat of paint on.

@samuelcramphorn3874

Жыл бұрын

im in the exact same situation now. What did you do in the end?

Does the first sanding get rid of any wallpaper paste residue ?

@Inexteriors

2 жыл бұрын

@Danny A . It sure does, if you want to sugar soap aswell you can, to be honest i never have suger soaped in 25 years.

This was very helpful, thank you! I was looking for what to do next after stripping wood chip, sanding, initial filling and resanding of Victorian walls. I'm putting up 1400grade lining paper once the woodwork has been painted as the walls aren't perfect. Do I need to wash down with sugar soap and do a coat of paint before papering?

@Inexteriors

Жыл бұрын

Thankyou for watching,this video will help with what to do. kzread.info/dash/bejne/fGWIurWvdsSwpqw.html

@gypsygem9395

Жыл бұрын

@@Inexteriors thank you for your quick reply Steve! I've subscribed after looking up more of your videos (before I saw your reply). I love your motto, 'progress not perfection', it's going to become my mantra!

@Inexteriors

Жыл бұрын

Thankyou for your support, i am glad to help. Perfection does not exist, if you do your best, it will always work out ok.

I’ve got a house that is fully wallpapered and walls are not good when I’m removing it I think it was professionally done I’m left with brown plasterboard and painted patches I’ve been sanding filling to try and even it out your video is a great help

@Inexteriors

11 ай бұрын

Thankyou very much for watching, i am pleased the video helps. Let me know how you get on.

@sineadgilgunn3660

3 күн бұрын

I’m the same. Did you put a primer on after removal of wallpaper or just first coat of paint? I just imagine my walls will be bumpy 🤔

Can you please explain what’s the best way to set your ladder up to get at the top of the staircase?

@Inexteriors

4 ай бұрын

Hope this helps, kzread.info/dash/bejne/q3mI3JOMc8y9e5M.html

@jackiecole7005

3 ай бұрын

Thank you! 😊

how do get your easifill to sit right. I find when I try and smooth off I get loads of ridges etc and if I try and smooth too much it pulls out. Thanks

@Inexteriors

Жыл бұрын

Dont over fill, most filling situations require 2 fills. Fiill clean so there isn't much sanding. Also once everything is fully painted and everything is back in the room you probably won't notice the odd defect here and there.. Remember progress not perfection.

I was going to get paint from Home Bargains for the 'mist' coat or prep coat as it's cheap. Any thoughts on the downside to doing this?

@Inexteriors

2 жыл бұрын

@Dan F . I used valspar contract matt in this video as i wanted to help hide the blemishes in the walls, it is also good for new plaster. Let me know how the home bargains paint is for base coating when you are done, thanks for your support much appreciated.

What grade sandpaper do you use for second sand? 80 again?

@Inexteriors

2 жыл бұрын

@simon Ward . U used a worn down 80 grade sandpaper.

Very simple question. My wall still has small residues of wall paper glue is it fine to leave and start painting or would I have to completely remove all the glue?

@Inexteriors

Жыл бұрын

If glue is dry give it a sand, then a wash with some suger soap to be safe.

Awesome thank you.

@Inexteriors

8 ай бұрын

Thankyou very much for watching.

Matey, nice vids… get yourself a Mirka or like for sanding👍

@Inexteriors

2 жыл бұрын

@Jamie Padington . Thankyou very much.

Any particular reason ya use caulk board instead of a broader steel filling knife?

@Inexteriors

2 жыл бұрын

@Deekoh39 . Its just how i was taught, i also have a wider caulk board.

@deekoh3996

2 жыл бұрын

I’ve just never seen them Here in the US Interesting 🍻

@Inexteriors

2 жыл бұрын

@@deekoh3996 Lol, i think i know what you mean with the broader filling knife, i think they use the for dry lining here.

When I do the wallpaper removal I take everything of skimm the walls then sand then prime and it comes out MINT is that ok I find it easier PLEASE let me know what you think feedback please ty

@Inexteriors

Жыл бұрын

Sounds good to me my freind.

I've removed wallpaper and walls are painted in an old eggshell type paint. How do I prepare it to take a matt or vynil matt emulsion?

@Inexteriors

2 жыл бұрын

@Gail . Give it a good sand with 80 grade sandpaper to get a good key, then do a tester patch with 2 coats of matt and see what happens.

@housetastic3031

2 жыл бұрын

@@Inexteriors Thank you

@Inexteriors

2 жыл бұрын

@Gail . Let me know how you get on.

Great work! What paint do you use for base coat?

@Inexteriors

Жыл бұрын

Thankyou very much. It was valspar. www.diy.com/departments/valspar-trade-white-matt-emulsion-paint-10l/971878_BQ.prd?storeId=1232&&&ds_rl=1272379&gclid=CjwKCAjwge2iBhBBEiwAfXDBRziG_Wf3aJVU1vYsxQdY7lf5-NxsdMep0k3t7Wdncsn6Cb7hktzsuRoCCwUQAvD_BwE&gclsrc=aw.ds

@amritpalsandhu684

Жыл бұрын

@@Inexteriors thank you and I assume I can paint over this fine with other Matt paint? I want to put on dulux matt as my top coat

@Inexteriors

Жыл бұрын

@@amritpalsandhu684 Yes.

@amritpalsandhu684

Жыл бұрын

@@Inexteriors thankyou! 😊

Hi, i have taken the wallpaper off but it’s taken off paint underneath, so now just plaster. How do I prep the wall for painting? Do I now have to prime the plaster?

@Inexteriors

Жыл бұрын

It is a good idea to mist coat new plaster, this video might help. kzread.info/dash/bejne/qHV-0MqfgManotI.html

@christhewizardhubbard9176

Жыл бұрын

@@Inexteriors Thanks for the quick reply. And your video has been very helpful.

@Inexteriors

Жыл бұрын

@Chris The Wizard Hubbard Thankyou very much. I can't see what your walls, but you might want to give the walls a light sand first. I do have a video on painting new plaster from start to finish, just let me know and i will give you the link. Its an extended version of the mist coat vid but it shows the full process.

Hello mate, i have managed to remove the main wallpaper however bits from second layer of the wallpaper are still stuck, is there any easy way to take these off as i think using a scraper would take ages

@ehsanak4072

2 жыл бұрын

Also is basecoat important, i am using green colour as my main paint colour but can basecoat colour b3 any colour?

@Inexteriors

2 жыл бұрын

@Ethsan Khan ,Try soaking the bits that are left with water, then try scrapping. You can use the the green as a base coat if your walls are in good condition then a base coat is not required, if it is new plaster under the wallpaper then it will need a mist coat.

The brand of roller you are using please ?

@Inexteriors

Жыл бұрын

It is this one in the link amzn.eu/d/hPs5IYq

Wondering why you sand by hand, not an electrical/battery sander? At least the first round of sanding..? Other than that, nice to see the whole process. 👍

@Inexteriors

5 ай бұрын

Its just how i was taught thats all, i think you are right lol, time to move with the timea lol.

How long did this take you mate?

@Inexteriors

2 ай бұрын

If i remember the full staircase including ceilings and wood work took about a week. the customer striped the wallpaper.

I have removed paper but it has pulled bits of the original paint off therefore very uneven surface,worse than your blemishes,any ideas as sanding it will take forever as i think i will havecto feathercall areas where paint has come off. Is there anything out there you can paint on prior to emulsion to even the surface? Appreciate any help as do not want to go to he expense of skimmming walls

@Inexteriors

Жыл бұрын

Try this method of filling some of the areas in this video. kzread.info/dash/bejne/oZtqlbSYmdWyo7w.html Remember perfection does no exist. so follow the procces in the video but fiil the areas how i filled in the video i have left in the comments. You can use this ready mixed filler, if you dont want to mix the gyroc easifill 60. www.diy.com/departments/make-good-ready-mixed-jointing-filling-finishing-powder-compound-2-5kg-box/5060370713097_BQ.prd?storeId=&ds_rl=1272379&gclid=Cj0KCQiA-oqdBhDfARIsAO0TrGFUHkPASb682daGTaLR_FI2s0svvRolFp0tfHAflquNwKfP8xSBBa0aAuw3EALw_wcB&gclsrc=aw.ds Hope this helps.

@grahamcharlton861

Жыл бұрын

@@Inexteriors Many thanks for your swift response,will try the easyfill ovwr next few days,many thanks again

@Inexteriors

Жыл бұрын

@@grahamcharlton861 Let me know how you get on.

@grahamcharlton861

Жыл бұрын

@@Inexteriors will do

@grahamcharlton861

Жыл бұрын

Rubbed down,filled,rubbed down,filled base coat emulsion to highlight any areas,rubbed down again,filled still not so good, carry on tomorrow and try to improve it more

is there a risk of any remaining wallpaper adhesive embedded in the wall reacting with the paint?

@Inexteriors

Жыл бұрын

You can wash with suger soap if needed, to be honest in in 26 years i have never had a problem. A good sand has always done the job. Just make sure walls are dry before sanding. or you can coat it in zinsser guardz first, i have never used it, but i have heard good things about it.

@amritpalsandhu684

Жыл бұрын

Apologies me again, I’ve sanded my walls and washed down and then applied a mist coat, as I’ve then gone to do a base coat. The mist coat has some chalky residue, is this normal? Then when applying Matt emulsion on top neat, I can then see the mist coat underneath getting wet and thinning out, the wall then scratches very easily and the paint scrapes off. Any ideas? Can I apply Zinser primer over the top to seal? Or do I need to go back to bare plaster?

@Inexteriors

Жыл бұрын

@Amritpal Sandhu Hi, let it dry, give a light sand then apply the zinsser guards, it is hard to make a proper assessment without seeing it.. how much chalky residue is there.

@amritpalsandhu684

Жыл бұрын

@@Inexteriors thank you

I need help with my walls

@Inexteriors

2 жыл бұрын

@Daily Whatsapp . Whats the problem you are facing with the walls.

@dailywhatsapp3822

2 жыл бұрын

@@Inexteriors I removed the wallpaper from a property i just brought and it looks like the previous skim is cracking near the ceiling. Also the switches and sockets are loose. Watching your videos has given me some confidence, but still don't know what I'm really. 😉

@Inexteriors

2 жыл бұрын

@@dailywhatsapp3822 All you can do is your best, progress not perfection.

How much did you charge

@Inexteriors

4 ай бұрын

I cant remember now, it was about 3 years ago.

Coat on first. Then fill

@Inexteriors

Жыл бұрын

Ok

What does it mean to "fill cleanly?"

@Inexteriors

5 ай бұрын

When you fill cleanly, its easier to sand.

@shusseina

5 ай бұрын

Thanks. I understand it's easier to sand, but I don't actually understand what "fill cleanly" means. Does it mean, fill any holes flush and do not overfill them? @@Inexteriors

@Inexteriors

5 ай бұрын

@@shusseina yes because you can always give it a 2nd fill, most holes require 2 fills, some times 3, dont over fill thinking it will go in 1 fill.

G needs a haircut, top class content though 👍

@Inexteriors

11 ай бұрын

lol, i have had a few haircuts since, thanks for watching.

Treat yourself to a Mirka dust free random orbital sander and dust extraction machine. Sugar soap wash after sanding.

@Inexteriors

Жыл бұрын

Great

What is the Paint finish on the walls

@Inexteriors

2 жыл бұрын

Vinyl matt

Should have put a coat off blue zinsser on the walls first , then fill

@Inexteriors

Жыл бұрын

I will try one day, you mean the bullseye 123, i am slowly getting round to try all the zinsser products, very happy with what i have tried so far.

@weeali1965

Жыл бұрын

Yes seals , and zinsser gards good as well, seals old wallpaper paste and dry walls, top coat with any emulsions

@Inexteriors

Жыл бұрын

I will get round to using it, i really appreciate the feedback, its always good to keep learning.

You didn’t bond the wall first if there’s any paste on the walls still it will bubble through the paint

@Inexteriors

Жыл бұрын

It went fine lol, I would of use zinsser gardz if there was any problems lol.

so no need to skim yea mate?

@Inexteriors

Жыл бұрын

Let me know how you get on, remember progress not perfection my friend.

Wrong process on many levels

@Inexteriors

9 ай бұрын

Ok bud, no worries, we all do things different my freind, what would your procces be.

@beecee985

9 ай бұрын

Mirka or machine sander all surfaces, filler, light sand over filler, coat of zinsser guardz to seal in old paste residue, 1st coat of paint, filler, 2nd coat

@Inexteriors

9 ай бұрын

@@beecee985 I have only started using the zinsser products the last couple of years, never used the guardz, heard good things about it just like the other products. To be honest i have never had a problem with paste residue, Many people mention machine sander, think i will invest in one lol, i appreciate you engaging with the channel.

How not to decorate would be a better title

@Inexteriors

Жыл бұрын

lol.