Just a terminology note for future vids. You keep referring to bolts/nuts as T10 or T7. That would be a torx bolt/nut. All of the ones you mentioned are just 10mm and 7mm hex nuts.

After taking off the stock pipe, I was shocked that not a single KZread video on these hardpipe "upgrades" shows the fact that the stock "resonator" is literally just a hollow pipe like any of the aftermarket ones.

Well, I don't own a Paddy Hopkirk Mini - but he drove me round a rally stage in his mini once! Nice guy, very fast driver!

@TheMINIVlog

Жыл бұрын

That is so awesome!

Nice clear video, always good when you show the clips and how they work out of the car.

Nick, that was such a fun day and the installation was awesome 😊. I’m glad to relive it on your channel. The video came out perfect! Until the next install 😉

You are the most gentle mechanic I’ve ever seen. 😂 But I don’t blame you when you’re working on someone else’s car, especially if it’s a special edition like that one!

What does the wiring harness do in the blow by vent tube? Thanks

Easier and safer to just unbolt the MAF sensor and leave it inside a ziplock bag instead of messing with the clip which can break.

Where did you bought the red MINI sticker on the engine cover? Thx

What are the reasons/benefits of this mod? Does it increase turbo noise or exhaust note? Thanks!

@RichsMINI

Жыл бұрын

Yeah, there is a little more turbo noise and in Sport mode the exhaust note is a little louder 😃 The pipe allows for smoother airflow to the turbo and I’ve noticed better gas mileage and a much smoother idle

Thanks for sharing in detail this mod. Did you change the wheels, turn signals, and belt line? Just curious as yours is a little different looking. I noticed it did not have the 37 side markers.

@RichsMINI

Жыл бұрын

Of course and you are correct 😊 The wheels are from my previous MINI and I love the contrast with the Chili Red paint. I installed the piano black belt line and the LCI2 black exhaust tips to match the other black accents. I installed the LCI2 side scuttles to keep the “37” ones in perfect condition.

@benbenji

Жыл бұрын

@@RichsMINI That’s awesome, I had heard about several variations, and really like how yours has turned out. I wish we could have had the famous lights in the front but oh well right? Could you share where you bought the belt line at? I’ve searched high and low trying to find a hood one, and I’ve not been great at locating one yet.

@RichsMINI

Жыл бұрын

@@benbenji Thanks 😊, I would love to have the driving lights but don’t want to drill into the crash bar. I got the belt line from Flow MINI online. www.minipartsdirect.com/oem-parts/mini-waistline-finisher-piano-bla-519059-51135a0b944 I just found another BMW parts site that has it at a big discount. www.bmwpartsworldwide.com/oem-parts/mini-waistline-finisher-piano-bla-519059-51135a0b944

Greetings. You installed the C-clamp onto the pipe and simply pushed down on the turbo inlet? It just clicks into place? Thank you.

@TheMINIVlog

6 ай бұрын

Correct, it will click in when the clamp opens and then clamps down in the channel on the tube is in the correct spot.

Is there any reason why you didn't add an aftermarket air intake while doing this mod?

@TheMINIVlog

Жыл бұрын

It only really adds noise and not so much power. Not enough to be worth it anyway

@stevenmiric2616

6 ай бұрын

@@TheMINIVlog that's what I thought until I installed full Eventuri intake on my MINI... IMHO, worth the price!

Do you reckon you would need to gold heat wrap the hard pipe if potentially turning the car in the future?

@TheMINIVlog

Ай бұрын

At this point probably not? It does not seem to be an issue so far.

@chrisjfox8715

3 күн бұрын

​@@TheMINIVlog well not issue but it can only help, wouldn't it?

How are the IAT temps after this? I thnk that aluminium pipe connected directly to the turbo can't be a good thing

@TheMINIVlog

Жыл бұрын

We checked them the other day and they seemed to be in a reasonable range and don't appear to be too much warmer than stock

@desireebirmingham2420

Жыл бұрын

@@TheMINIVlog I had the same question/s concerning aluminum. In Texas it is already quite hot, any warping down the road with the pipe? I know we could put some heat wrap on it. Thoughts?

@TheMINIVlog

Жыл бұрын

@@desireebirmingham2420 I've seen others wrap it send they didn't appear to have any negative affects so if you are worried about it, I'd say go for it!

@chrisjfox8715

11 ай бұрын

​@@desireebirmingham2420I'm a newb but I would think that a better intercooler, as long as you can afford it, would be a much much more effective investment than heatwrapping the intake pipe. Heat tape won't hurt but I can't help but think that its benefit would be neglible on top of the intercooler later cooling the air way down anyway. Thoughts?

@desireebirmingham2420

11 ай бұрын

@@chrisjfox8715 I think you are correct, if the money is there. have friends that do their own work on their MINIs. They've put the tape on, even with an intercooler. Myself, I do not have the cash for an intercooler right now, upgraded to an Eventuri at the moment.

1:13 hex Not T10 ?!