Use and settings in the torch to heat and bend mild steel
Жүктеу.....
Пікірлер: 32
@TehArtfulDodger13 күн бұрын
Thanks for the awsome video
@mikesanders401211 ай бұрын
Best details on the valves & gauges settings. More of that is good
@DmitriyGolovinov5 жыл бұрын
Thanks for this quick intro!
@ouchmykryptoe Жыл бұрын
Very helpful thanks!
@eldigitom96804 жыл бұрын
good video
@SuperOpinion8ed7 жыл бұрын
I'm very new to all of this but here's what I've heard the consensus is: 1. 1/4 turn on acet, but open the oxygen all the on the tank. The O is high pressure and you need to back seat the valve. Opening part way can allow O to leak around the stem or seal. 2. Supposedly they changed the "A before O" to "O before A". Not sure why but from what I heard the forever was was A then O and now the society of welders or whatever decided the other way was better. Glad I don't need a new tip for heating. I used that one for cutting for the first time and now needed to heat something. Thanks.
@paulmichaud3230
5 жыл бұрын
What I have seen and read is that torch manufactures say to shut off O before A, but nearly everyone else says A before O. I'm nearly positive that when I was in shop class thirty ago the teacher told us to shut of the preheat oxygen first. That is the knob closest to the tip. That agrees with the book that came with my new torch. If you hear a loud snap when you turn the knob off, don't do that again! My guess is that they changed the order because everyone forgets which oxygen to turn off first so if you turn off the acetylene first there is only one knob and the only downside is the soot build up.
@brooksamon
9 ай бұрын
Simple way to remember is you only ever want the acetylene alone. So startup: acetylene then oxygen. Shutdown: oxygen then acetylene.
@mitsosgeo8453 ай бұрын
Those tips are made for cutting if you do heating you will broke them . The oxygen jet must flow from the inside to cool them too
@PandaMan023 ай бұрын
safety goggles for acetylene are available on amazon for like $10-15
@MrGiXxEr5 жыл бұрын
Safety Sally's gonna Safety Sally
@IanMossMakeMoss5 жыл бұрын
And scene. Haha. Good tutorial
@marynollaig41243 жыл бұрын
Gave you a thumbs up.
@colinlpeace Жыл бұрын
You probably want to mention why the acetylene is so volatile. It’s because of how it’s stored in the tank. Proper psi is really important because sometimes the cylinder can’t produce enough gas and that can cause blowback. Especially in a colder environment.
@lajoswinkler
8 ай бұрын
It's not so volatile because of how it's stored in the tank. It's stored in the tank the way it is _because_ it's so volatile. It's volatile because of its molecular structure.
@colinlpeace
8 ай бұрын
@@lajoswinkler Uh… I dunno. Sounds like semantics to me. It’s not just stored in a tank. There’s a monolithic filler and acetone in acetylene tanks that can interfere with the air pressure when the tank is low or cold. And conversely, pressure increases the warmer it gets. So yeah it controls the volatility but in certain conditions it does it too well.
@DennisNeale5 жыл бұрын
And while I'm at it, you need to explain to people why it's imperative to open the oxygen slowly, and why it's wise to turn your body and face away from the tank when doing so.
@Yeye3040
5 жыл бұрын
You forgot dark glass
@---ny4ys
5 жыл бұрын
@@Yeye3040 for a cutting torch? Nah. I might wear some safety glasses for fear of slag, outside that, no need
@cranetrucker12982 жыл бұрын
Why did he wave his hand in front of the nuetral flame?😂
@georgesiatos98488 жыл бұрын
this tip is for cutting
7 жыл бұрын
George Siatos Yes. He says so at 1:20.
@alannorthcarolina1776 Жыл бұрын
What regulator output pressures did you use?
@mikesanders4012
11 ай бұрын
Give him time to answer, it's only been 5 mo
@inthelandofmilkandhoney4573 жыл бұрын
Other channels say to shut the OXYGEN off First.
@jeremiedaniels813
4 ай бұрын
Don't!
@stevepope548410 ай бұрын
Please! Heat is hot Ok Gauges???
@neverready01570 Жыл бұрын
This guy reminds me of the gun range instructor who fired the gun accidentally.
@jaredtansley32366 жыл бұрын
101 lesson bro Set your station up before you start your Video lol 😂
@TM-tz9rr Жыл бұрын
ALWAYS SHUT OXY OFF FIRST!! wth man you going to get these kids fried
@saloram9903 жыл бұрын
OMG this video shouldn't be on KZread is very unsafely
Пікірлер: 32
Thanks for the awsome video
Best details on the valves & gauges settings. More of that is good
Thanks for this quick intro!
Very helpful thanks!
good video
I'm very new to all of this but here's what I've heard the consensus is: 1. 1/4 turn on acet, but open the oxygen all the on the tank. The O is high pressure and you need to back seat the valve. Opening part way can allow O to leak around the stem or seal. 2. Supposedly they changed the "A before O" to "O before A". Not sure why but from what I heard the forever was was A then O and now the society of welders or whatever decided the other way was better. Glad I don't need a new tip for heating. I used that one for cutting for the first time and now needed to heat something. Thanks.
@paulmichaud3230
5 жыл бұрын
What I have seen and read is that torch manufactures say to shut off O before A, but nearly everyone else says A before O. I'm nearly positive that when I was in shop class thirty ago the teacher told us to shut of the preheat oxygen first. That is the knob closest to the tip. That agrees with the book that came with my new torch. If you hear a loud snap when you turn the knob off, don't do that again! My guess is that they changed the order because everyone forgets which oxygen to turn off first so if you turn off the acetylene first there is only one knob and the only downside is the soot build up.
@brooksamon
9 ай бұрын
Simple way to remember is you only ever want the acetylene alone. So startup: acetylene then oxygen. Shutdown: oxygen then acetylene.
Those tips are made for cutting if you do heating you will broke them . The oxygen jet must flow from the inside to cool them too
safety goggles for acetylene are available on amazon for like $10-15
Safety Sally's gonna Safety Sally
And scene. Haha. Good tutorial
Gave you a thumbs up.
You probably want to mention why the acetylene is so volatile. It’s because of how it’s stored in the tank. Proper psi is really important because sometimes the cylinder can’t produce enough gas and that can cause blowback. Especially in a colder environment.
@lajoswinkler
8 ай бұрын
It's not so volatile because of how it's stored in the tank. It's stored in the tank the way it is _because_ it's so volatile. It's volatile because of its molecular structure.
@colinlpeace
8 ай бұрын
@@lajoswinkler Uh… I dunno. Sounds like semantics to me. It’s not just stored in a tank. There’s a monolithic filler and acetone in acetylene tanks that can interfere with the air pressure when the tank is low or cold. And conversely, pressure increases the warmer it gets. So yeah it controls the volatility but in certain conditions it does it too well.
And while I'm at it, you need to explain to people why it's imperative to open the oxygen slowly, and why it's wise to turn your body and face away from the tank when doing so.
@Yeye3040
5 жыл бұрын
You forgot dark glass
@---ny4ys
5 жыл бұрын
@@Yeye3040 for a cutting torch? Nah. I might wear some safety glasses for fear of slag, outside that, no need
Why did he wave his hand in front of the nuetral flame?😂
this tip is for cutting
7 жыл бұрын
George Siatos Yes. He says so at 1:20.
What regulator output pressures did you use?
@mikesanders4012
11 ай бұрын
Give him time to answer, it's only been 5 mo
Other channels say to shut the OXYGEN off First.
@jeremiedaniels813
4 ай бұрын
Don't!
Please! Heat is hot Ok Gauges???
This guy reminds me of the gun range instructor who fired the gun accidentally.
101 lesson bro Set your station up before you start your Video lol 😂
ALWAYS SHUT OXY OFF FIRST!! wth man you going to get these kids fried
OMG this video shouldn't be on KZread is very unsafely