Overcoming Challenges in Our Ram 3500 Camper Truck Build - Major Mistakes & Triumphs!
Автокөліктер мен көлік құралдары
In todays episode were trying new things, and fixing it when they go wrong! And building out the boxes, the final steel work on the habitat!
Thanks to hyperlight for helping supply us with lighting in the shop. Heres a few different links to save on their lights, I highly recommend them.
BLACK FRIDAY - hi-hyperlite.com/pages/led-li...
Hyperlite Led High Bay Light - Saturn Series
Website:(6% OFF Promo Code: BIS4BUILD)
hi-hyperlite.com/discount/BIS...
US Amazon 5% OFF Code: BIS4BUILD
amzn.to/47WCdID
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten
Пікірлер: 670
I definitely would’ve went with more composite materials to build this rig, can’t imagine how much this thing weighs and not even having any interior done.
Sorry to say Chris but the biggest mistake you have made so far is that you didn’t upgrade the suspension in the back because of the use of steel instead of aluminum. With what you have right now is probably pushing the weight limits before you start putting in cabinets, storage, refrigeration unit, heating and cooling systems, water storage, waste storage, wiring and plumbing, windows, doors, and there still is things like cushions and beds, etc. To fix it now you will need to remove the shell RIGHT NOW before it gets too heavy to lift. Before you ask how do I know? 20 years experience of building recreational vehicles just like you are doing. Oh, you also might want to check on the center of gravity and make sure that it’s not too heavy, you’ll have a tipping problem. Not trying to rain on your parade, just wanting you and the gang to be safe.
@brianswanigan9891
6 ай бұрын
I should have waited until the end to comment, you need to stop now!! The truck is already starting to squat down because of the weight. Please rethink the design. There needs to be six inches of clearance AFTER you put the interior in the camping shell, how much do you have right now? I’m sorry but your project looks like it is now becoming a little dangerous.
@BlueDually4x4
6 ай бұрын
@@brianswanigan9891 They haven't listened to reason on anything. It will get used once and parked like everything else. The boat still needs about 4k pounds of ballast to sit right in the water and I doubt that will ever happen.
@brianswanigan9891
6 ай бұрын
@@BlueDually4x4 I know, and it’s scaring the crap out of me. When we would work on trucks like this we would avoid the Dodge Rams because of their frame using a C-channel style. Even when I had to install a 5th wheel hitch on a Dodge I would collapse the frame and we would have to spread it back out and reinforce the frame. So we would use Fords, and something of this weight should be on a F450 at the minimum. I checked the weight limit on the Ram and it’s 5-7k. He’s hitting that with the camper shell along. I just hope nothing fatal happens.
@angerthosenear_yt
6 ай бұрын
Especially with what happened to a similar vehicle that Donut reviewed that broke quickly.
@Wick-d_Trucking
5 ай бұрын
I once made a small charge pipe from stainless steel cause I didn’t have a welder for aluminum. I thought that was ghetto and was ashamed of it. I painted it to hide it. This was like 15 years ago when I was only 20. But this is next level ghetto. This thing is gonna weigh 15k lbs and be super top heavy. Ambition strikes built an aluminum shell on a newer 3500 and were within like 100 lbs of the “legal” gvwr. They said it handled like garbage until they did some suspension work. This thing isn’t doomed for failure, it IS a failure.
Today for Thanksgiving I am thankful for this channel, and all the effort you and your crew put into making these videos for us. Whether it's a crazy single-seater, an off-road Huracan, a drill-powered bike, a boat, or an insane off-road custom camper, we're here for it. Thank you!
If you add heat/ac to this box; I advise ducting your heat to come out of floor vents and the ac from the roof mount/or vents. That way the heat rises all the way through the box and the ac falls all throughout the camper. Love the series and I can't wait to see it finished. Also I'm very excited for the door, can't wait to see how it works!
The channel needs to be called "O is for Oscar".
Chris, mount these boxes with bolts. You will be able to remove them if it is needed. Also, in these gaps between you will accumulate a lot of mud and dust from the road, and that will rust. So I think it is better to have them removable.
@jwalster9412
6 ай бұрын
Or he could just put many different layers of paint and some raptor liner and hope it doesn't rust.
@gamingpredator4226
6 ай бұрын
I would agree, but to be fair it will still take a couple years for rust to get bad and i dont think its a massive deal for them to cut them off and rebuild them if needed
@frankish5314
6 ай бұрын
Plus they don't use salt on the roads in the Pacific North West.. Rust is usually a non issue.@@gamingpredator4226
@tootone
6 ай бұрын
@gamingpredator4226 yeah if this were a production vehicle id totally agree. But for them it's nbd.
@RealElwood1
6 ай бұрын
Probably not going to be used often enough for, who knows it might be parked somewhere in the middle of nowhere for a few years waiting for a motor swap...
I love this build but I really want to see it on a scale . One hell of an apocalypse camper but HEAVY seems like an understatement 😅
@vadim7590
6 ай бұрын
Never seen a vehicle with 0 mpg 😂 😂
@microchrist6122
6 ай бұрын
Don’t most of these things get built by aluminum and fiberglass ?! I don’t get how they are using steel for literally everything
@cinnamonrollypoly
6 ай бұрын
Busses are built with all steel. It should be fine.
@brianswanigan9891
6 ай бұрын
@@cinnamonrollypolybuses have heavier suspensions than a 3/4 -1 ton truck. It won’t be able to go off-road due to the weight.
@cinnamonrollypoly
6 ай бұрын
@@brianswanigan9891 Uh, short busses are literally built on the E-350 platform, which is comparable to the dodge RAM 3500. This truck has duallies, so pretty sure it has the heavier suspension. It's built to tow. It can handle it. My brother has the same truck... It can do it no problem.
Ive said it multiple times in the past and ill say it again, Oscar is absolutely insane with that welding gun. Props to the guy for all his amazing work, he really puts out some top quality welds.
This thing is going to weigh more than an M1 Abrams
20:55 PLEASE I would love to see more of the 240Z and single seater!!
I remember you mentioning earlier on in this build that you’ll be getting a bunch of lead acid batteries to use with a power inverter. Just wanted to throw out a quick suggestion that you go the lithium (LiFePO4) route instead; the energy density is far better, they weigh significantly less, have a longer life, and are just generally way less finicky/tempermental. Renology is a fairly popular brand, but I personally went a cheaper route and went with ampere time (I think they changed their name to li-time). Then I found a charger-inverter, which when plugged into shore power will automatically charge the batteries, then when on battery-only it switches to inverter mode. I also added another DC-DC lithium charger for when we’re on the road, so the tow vehicle can charge the batteries too.
This thing is going to be too heavy to do anything... I was originally on board against the steel haters, but this thing is getting out of control quick. I LOVE the way its turning out, but I don't think it'll even be usable when its done...
I really hope your friend with the Porsche shop can get your 911 fixed. I bought my first 911 a few weeks ago and it's my absolute favorite car I've ever owned
I love this build from the start my only concern is tgat it's going to be too heavy. You should have used a combination of other materials to offset the weight
@tma4137
6 ай бұрын
Do you know what punctuation is? Or are you just an absolute pinecone? Also, learn how to spell.
@cameronsienkiewicz6364
5 ай бұрын
There are ways to make the truck suspension strong enough.. just look at the earthroamer
Love this thing! As an adventurous, camping person this is so cool. It looks great, boxes are beautiful addition plus pull out tables 👌
For the tables you should have used draw slides like on your kitchen draws. Alot better alot smoother and stronger no legs required. Have a look at some of the Australian 4wd channels for some inspo
I think you need to check out the boat, get it fully ready for any freezing weather!
Looking great! Have you ever thought about doing a body swap with a new Audi TTRS and an old Audi Sport Quattro? I’d be so hype for that haha
If this channel isn't renamed to *O is for Oscar* I'm going to riot! The dude is an absolute swiss army knife of a workhorse. He better get *all* the available raise budget dedicated to him.
Oscar did a great job! As usual!
@HarryCrackz
6 ай бұрын
This video was like 98% Oscar doing stuff
Sikaflex is the magic sealer you seek. 👍
@B - so much weight into this truck now - you could probably use it to chase tornadoes now! :D
Its awesome how you've been listening to the comments and feedback. If you could do a track day on all of your old builds that would be sick! Maybe all race each other or something lol
The vision, the hard work, the positive attitude when things go wrong are all ingredients that make this channel so good!!!!
Great fun to watch. Oscar is the GOAT of welding. I like the Carolina Squat too! Looking forward to the finished product.
Can't wait to see more on this rig! This is one of my favorite builds so far! ❤
Nice, personally would have built a steel skeleton frame, got it galvanised, and riveted alloy/composite panels on with marine grade sealer, but great build none the less
Oscar always doing all the work 🙆
Been waiting for some overlander action!
Oscar is really all out to do so much work. Kudos.😊
Even for non-automobile types this You Tube channel is interesting and enjoyable. The creativity and workmanship that goes into building the camper truck is admirable. Looking forward to watching more progress occur.
God damn Oscar did a great job in this episode!
Wow. What sweat I integration. For table and box. Sweet.
this thing is actually turning out pretty badass
I love the fact that you don’t put a lot of ADS (THX❤)
you guys are brilliant at this, better than any car program/show shown here in the UK,been watching since just before COVID hit and am never disappointed with any builds,iv even made a skyline on my gta5 to look like yours,great work keep going and don't change how you are
As long as you learn something.... it is not a waste. No matter the cost.
Great to see more work on the camper. Been patiently waiting for this.
Thank you for bringing it back!
It's like a Dodge... UNIMOG. Haha. I love it fellas. Keep on building! 👊😎
The camper is a really cool project. I like the idea of painting it with bedliner instead of traditional paint. How are mud flaps going to fit behind the rear wheels, what if the rear boxes get soaking wet in the snow in the mountains. You are lucky to have Oscar on your team for a project like this.
Insulated fiberglass panel instead of metal was my plan for light weight but you look ready for camping downtown Detroit
Oscar is the man!
FINALLY ITS BEEN HALF A YEAR!!! Miss this build
I am sorry I dont want to be rude or anything. I love your channel and have been following it from past couple of years. I dont know why you dont finish one project first and have a brainstroming session with your team and ask other before beggninng. I know you are the master along with Oscar it makes a great team. Just wish you take suggestions from others as well that would help you overcome these drawbacks well in advance.
You should build a wide body kit for the front end to include the headlight surrounds and grill. Angular like the camper …..
The camper is really coming along. It's gonna be so epic when you are done
Great project build. I'm glued to this one. The creativity is beyond reproach.
Always a pleasure to watch you guys bring thought to reality
im amazed on what this channel have become!
3m panel bond adhesive would fill all the cracks and be there forever
This truck is going to be ridiculously heavy when its done.
When you said about coating the fj in raptor 6 r 7 years ago made me feel real old! I remember watching the brz episodes god knows how long ago that was 😩
Chris, pls get some cheap covers for the cars just standing, with open doors and more. Excited project :-)
Happy thanksgiving from Mayflower park in Southampton!! Let’s face it, that’s where it all began!!
Happy thanksgiving 🦃
Highly highly highly recommend getting heavy duty drawer slides instead of just using that c-Channel as a slide.
I don't know what you're payin Oscar, but that man needs a raise. He did an awesome job.
Maaan would love 2 or 3 episodes in a week 😅
Happy Thanks Giving B is for Build! You should LS swap that porsche.
Awesome as always.Thanls for sharing and taking us along
Only one word needed SICK
13:00 this is a fight for the right to repair that we all need to get on board with. Louis Rossman is the guy everyone needs to support hes been fighting for it for years. He has a donation campaign you can help with if you believe in your right as a consumer to fix the things you paid for
Tons of fab on this thing, literally...
So stoked to see this build get finished!!!
Thanks for giving us content to watch on these holidays I needed It❤
Oh good, you added more weight
The "under boxes" were a pleasant surpirse, and Oscar did a great job.
Looking really good. Full time traveler here so we'll see you out there.
Wow, rad build!! Can't wait to see the finished product
Weve been using it and it works flawlessly
Love the Camper, just needs a lot of Diesel Power at the end😌
Yay the Truck is back.....and did I hear 2 Episodes a week???!!!!!!!!!
That truck is a beast great design
This is a mean looking truck… can’t wait to see it painted and completed on the road adventures 👍🏻😃
This is such an exciting build. Really love to see your design skills and problem solving applied to such a novel application. Hoping you do more compact campers in the future x
sO HAPPY FOR CAMPER TRUCK
This is going to flex a lot and will snap off the cab off road. Super sick though
Looks good Chris. I can’t wait to see it finished
Was just wondering about this while watching the drill bike video! Happy to see progress being made!
Should have filled it with tin / brass like the old days :P Plumber's solder just tap it into the gaps and go to town with a heat gun. The work on those storage boxes really shows off the skill you guys have perfectly. For the Porsche just buy some knock off software from China. Not sure if VCDS will do it since its basically VAG you might be able to put a module into say a VW and code it, then put back into your car (they do that here to code radios, ABS pumps and stuff with VW golfs and the gateway model, you provide the code you want for module, and they pre-program it with VCDS by connecting it to another car and send it back.). You can also find a decent electrical repair dude to unsolder the chips containing serials and place them into the working modules.
been missing this build. very excited to see how this turns out.
That thing looks so heavy. Awesome build
If your looking for mounts for rifles. I see space in your floor . Id look into a floor safe . Kinda like cubby in the floor of ski boats.
Glad to see this back in process
I cannot wait to see the murcielago...
The weight of this thing is going to be no joke!
Great to see this build back, been missed
I think it'd have been a good idea to run a few beads on the box's panels, at least those that can't be seen.
A nice paint job will be nice
This seems like it's gonna be insanely heavy. Is it even gonna be able to tow with all the weight added to the body? Happy Thanksgiving!!
@MechanicalMafioso
6 ай бұрын
Was thinking the same thing. Was wondering if maybe they need some more steel to reinforce it a bit more.
@cinnamonrollypoly
6 ай бұрын
He already talked about this. It'll be fine. If busses can be built on the same platform with all steel, then so can this.
Would love to see a Cummings diesel in that Porsche 😎
Coming together nicely boys! I’m liking it for sure 👍
Really curious to see what this will weigh when complete.
This thing is going to be heavy as hell!!!
There's a shop in Tennessee that will work on the Porsche, they don't charge too too much. It's called Blue Ridge Motorworks
Hell yeah great build glad it’s back
Lets go on a campingtrip 🎉
Man i love this build its really looking awesome i do think lighter materials would have been a bonus but no one can say this isn't a absolute beast of a camper
Oscar is the Stig of building!