Our Volvo 345 Fails to Proceed!!!

Автокөліктер мен көлік құралдары

On the way to lunch in their early 80s Volvo 345 it has a hiccup and then dies on the busy A1307. Will they get home before they starve to death or will the residents of Cherry Hilton have them removed for lowering the neighborhood property values with the skanky little Dutch car?

Пікірлер: 51

  • @labellamaffia
    @labellamaffiaАй бұрын

    Love the sound of that car cranking and not wanting to start. And Sion is so handsome too!

  • @alsodriven

    @alsodriven

    Ай бұрын

    You'll be giving him a big head lol

  • @robertngreen6
    @robertngreen6Ай бұрын

    I love this old Volvo - it's so charming - even if it doesn't really work at the moment!

  • @alsodriven

    @alsodriven

    Ай бұрын

    Will be sorted soon

  • @chrisbury4635
    @chrisbury4635Ай бұрын

    Strip and clean the carb, take a spark plug or spark tester with you on the road test and if it does it again then check for a spark, if no spark then it could be the coil or ignition module if no points.

  • @mrcogginsgarage7062
    @mrcogginsgarage7062Ай бұрын

    Hello chaps what you have there is a dose of vapor lock these used to do it with monotonous regularly try re routing the fuel line from the pump to the carb,after that look at the ignition system might well be the condenser failing when warmed up . Deliveroo ?..

  • @grrfy

    @grrfy

    Ай бұрын

    yep,longer fuel lines seemed to help back in the day

  • @SiedCymraeg
    @SiedCymraegАй бұрын

    Looks like a vapour lock issue - your fuel line from the filter goes over the top of the engine, so it's going to get warm. Try routing the fuel line away from the major sources of heat in the engine bay if possible?

  • @sebastianohalloran9093
    @sebastianohalloran9093Ай бұрын

    The 345 is the same age as my partner and I! 80s carb fed Renault engines often used to experience vapour lock problems. Usually the F series rather than the Cleon but rerouting the fuel line might be a start. It strikes me that it is too lean when hot? We experienced similar issues with our fuel injected Renault 21, but in our case it related to a NTC sensor being fitted instead of a PTC which made the engine management computer think the engine was getting colder when it was getting hotter! Good luck, we went through all sorts of checks first and feel your pain!

  • @alsodriven

    @alsodriven

    Ай бұрын

    Siôn has 3 of these and none of the others do it so we think it's more of a faulty component

  • @lucythemoggy1970
    @lucythemoggy1970Ай бұрын

    you could see how stressed sion was after it broke down.

  • @alsodriven

    @alsodriven

    Ай бұрын

    He was a poor wee mite that day

  • @lucythemoggy1970

    @lucythemoggy1970

    Ай бұрын

    @@alsodriven haha

  • @OliverPickard
    @OliverPickardАй бұрын

    Sions a bit quiet at the beginning chaps, if the coils over heated in the past or the ignition is tired and there's a dirty jet it can cause a hot running issue ive just solved something similar on the Dyane

  • @alsodriven

    @alsodriven

    Ай бұрын

    We are working on mics, that one was useless and in the next video we forget to bring the better replacement one we bought. We really are useless

  • @OliverPickard

    @OliverPickard

    Ай бұрын

    @@alsodriven I'm not much better I'll be damned if I can get dad to remember to wear his

  • @davidyoung9561
    @davidyoung956116 күн бұрын

    I had a similar problem with my 1984 Volvo 340DL when I was driving it home from the place of purchase. Everything was fine until I hit heavy traffic on the M6 motorway. It suddenly cut out. I got it towed to a safe place off the motorway. Half an hour later, it started up fine and all the time I was on the move, no problem. One thing with that engine is the siamese inlet/exhaust manifold. The hot exhaust manifold causes the inlet manifold to get too hot and this causes the incoming fuel mixture to vapourize and results in the engine cutting out. A solution is to stove enamel the inlet manifold to cure the overheating problem. The Renault 5 has the same problem. Wheeler Dealers had a Renault 5 turbo with the same problem. They cured it by stove enamelling the inlet manifoild.

  • @alsodriven

    @alsodriven

    15 күн бұрын

    Yeah it's a common thing on the R5 Turbo Thankfully ours was something else

  • @spainter1985
    @spainter1985Ай бұрын

    My cutting out theory was going to be rust in the tank, blocking the pickup or rust being dragged through to the carb but having seen the cleanliness of the fuel in the filter - I'm doubting that! If the filter was that full when it cut out, I'd rule out a supply/pump issue. The only thing I can think of is a sticky needle valve in the carb or float issue preventing the needle valve from opening. Worth checking for spark at the plugs next time it cuts out I guess too!

  • @hueyw1916
    @hueyw1916Ай бұрын

    i briefly owned a 340, it was a bad time, no nostalgia here I'm sorry to say, but top marks for saving this one!

  • @alsodriven

    @alsodriven

    Ай бұрын

    It's stonky but we love it

  • @RamshakleRetro
    @RamshakleRetroАй бұрын

    I would have said coil as well. If the LT connection breaks when it gets hot then it will have to cool before it makes connection again. And unlike the HT connection the LT hasnt the juice to jump. My initial thoughts were fuel evaporation, but you basically ruled that out.

  • @Daz_Stap
    @Daz_StapАй бұрын

    Sorry you had a failed mission. On a different note, with that registration, I'm sure the Volvo would be well received at an East Coast Retros meet!

  • @roooooooory
    @rooooooooryАй бұрын

    Oh god Sion's poor face when the inevitable happened! 😢

  • @Zadster

    @Zadster

    Ай бұрын

    Like a puppy that just had its food bowl taken off it!

  • @sebastianohalloran9093

    @sebastianohalloran9093

    Ай бұрын

    @@Zadster he needed a hug!

  • @fulwell1
    @fulwell1Ай бұрын

    Things to check with this - there is a gasket (cork I think) that sits between the carb and inlet manifold that seems to either go porous and let air in, or flattens out and lets heat soak up into the carb (I can never remember which one it is!); they were also hellish guilty for vapourising the fuel (I think there was a mod that had a little fan that cooled the carb) that also involved re-routing the fuel hose. This is, of course, all assuming that it is the B14 engine. Also, the Renix ignition units could fail (if it uses one) - they are essentially a glorified coil.

  • @colinblick8946
    @colinblick8946Ай бұрын

    Had one of these….1.4 Renault engine…..crash bars in the doors….gearbox on back axle…. Aluminium prop shaft…., which failed on my car and left me stranded at side of the road😵‍💫😂has yours a dodgy fuel pump?? Mine was a 340

  • @jedrick001
    @jedrick001Ай бұрын

    Funnily enough as I think I’ve mentioned before, apart from passing my driving test in a 345 back in 1984 my friend had a 433 in the later 1980s which would randomly cut out and you would have to wait until it decided to go again. He ended up selling it 😂

  • @hueyw1916
    @hueyw1916Ай бұрын

    its burning lean- that may or may not be a red herring who knows- but too much air in the mix somehow by the looks of it.

  • @icascone
    @icasconeАй бұрын

    Sadly not answers... just wanted to say I liked the story of this car and in many cases it is how a cars manage to survive it's period where the car value is well past 10 years old but somehow the owner keeps it and takes care of it... Almost like love story... End of rant...

  • @alsodriven

    @alsodriven

    Ай бұрын

    We like that rant ❤️

  • @colinblick8946
    @colinblick8946Ай бұрын

    Sticking float bowel?

  • @stephenperry9425
    @stephenperry9425Ай бұрын

    It sounds like a carbarator vapour lock.

  • @johndawber3401
    @johndawber3401Ай бұрын

    Hope you've got some food now!

  • @ciaran_socal
    @ciaran_socalАй бұрын

    This might come out of left field, but… Does this car have a Renault engine? Does it also have electronic ignition? There is a sensor wire that goes down for timing or something. If that is faulty, it can cause a vehicle to stall after a while when running, and not start again for about five minutes or so. Just an idea. 🤷‍♂️

  • @alsodriven

    @alsodriven

    Ай бұрын

    Going to replace the electronic ignition and see if that helps. It's a very cheap old after market system

  • @ciaran_socal

    @ciaran_socal

    Ай бұрын

    @@alsodriven that sounds smart! 👍 Maybe check if any sensor wires attached to the EI module are also included.

  • @dombooth86
    @dombooth86Ай бұрын

    Might be worth dropping the tank & having a peek inside or could be a dodgy fuel pump maybe worth taking it off & getting it tested

  • @jlucht1000
    @jlucht1000Ай бұрын

    Into the Naughty Corner with it!

  • @alsodriven

    @alsodriven

    Ай бұрын

    It's part fixed... Bit more to do

  • @fhwolthuis
    @fhwolthuisАй бұрын

    Your voice is hardly audible 😅

  • @hhgttg69

    @hhgttg69

    Ай бұрын

    glad someone else has mentioned it as i thought it was me.

  • @alsodriven

    @alsodriven

    Ай бұрын

    Trying out new mics They are not great unfortunately

  • @markf4720

    @markf4720

    Ай бұрын

    Eh? I could hear everything fine!

  • @alsodriven

    @alsodriven

    Ай бұрын

    @@markf4720 it seems that phones play it fine, some TVs are not great and a lot of laptops just can't. We have another new mic in the next video so hopefully that is better

  • @RamshakleRetro

    @RamshakleRetro

    Ай бұрын

    Was quiet but ok on my ps4, but I have headphones on.

  • @Phiyedough
    @PhiyedoughАй бұрын

    Sound was very weak on part of the video.

  • @alsodriven

    @alsodriven

    Ай бұрын

    We are working on that...

  • @terryatkinson3182
    @terryatkinson3182Ай бұрын

    Coil? Cinquecento would never fail to proceed, touch wood 😂

Келесі