No video
OTC AND MAYHEW TOOLS MUST HAVES- 58" DOMINATOR BABY
OTC AND MAYHEW TOOLS HAVE A COUPLE TOOLS YOU DEFINETELY NEED. 58' DOMINATOR AND OTC CONTROL ARM S HOOK.
MAYHEW 58" DOMINATOR
amzn.to/3aTFqwn
OTC S CONTROL ARM TOOL
amzn.to/3xFVDza
RING LIGHT
amzn.to/3tTNS6j
FLASHLIGHT HOLSTER
amzn.to/2QYhBfM
OBSERVER TOOLS FLASHLIGHT
amzn.to/3nn4UHu
STREAMLIGHT HEADLAMP
amzn.to/2QXPZaK
Пікірлер: 50
Great tips, Tony. I laughed when I saw that 15” round bar because I use the same thing - it was an output shaft from a Chrysler transmission.
@NutsandBoltswithTone
3 жыл бұрын
Sweet man. It works so good.
Good Morning brother, I bought the same long Mayhew 58C pry bar too. I bought it on Amazon for $50.93. It came to me yesterday and it is a beautiful awesome big long Mayhew pry bar. It is new and is the orange handle one. I could not believe the price. Thank GOD I bought it! Because after I bought it, it immediately went back up to $110.00 dollars. I love it brother. I saw our brother CP had one and it made me buy it. Now I see you have one to, so I know I made the right choice. I love the 10 inch handle too. Just like you said, about getting both hands on for more leverage. And it’s 100% Made In The USA!!! Now I need that S-Bar that you have. That is genius on how you showed us all to use it. GOD be with you always my brother and bless you always. 🇺🇸😎🇺🇸
@NutsandBoltswithTone
2 жыл бұрын
Wow that price is amazing. Good thing you bought it when you did. I have never seen it that low. I am happy to help and that S hook is amazing, I use it everytime I have to disconnect control arms or axles. Thank you for watching.
Cornwell has recently come out with a 72" pry bar. I don't have one , but i do have a 58" Mac i don"t use it that often but glad it"s there.. Need to get the hook though.. Thanks Tone, great job!
@NutsandBoltswithTone
3 жыл бұрын
Interesting 72" that almost seems too big. The 58" is about as long of a pry bar I think I would want. Thank you for watching.
Good video. I have the big Mayhew prybar, too. Use it more often than I'd thought.
@NutsandBoltswithTone
2 жыл бұрын
That prybar is amazing, and if you have the OTC S hook it makes suspension work a breeze. Thank you for watching.
LIKED THE VIDEO... HONEST REAL ADVICE... KEEP IT UP...
@NutsandBoltswithTone
Жыл бұрын
Thank you very much. I appreciate you watching.
Awesome vid
@NutsandBoltswithTone
3 жыл бұрын
Thank you and I appreciate you watching and the comment.
Thanks. These videos are great. They teach us how to use some of these tools properly. You should do more vide!
@NutsandBoltswithTone
2 жыл бұрын
Thank you very much and I plan to keep the videos coming. Thx for watching.
@canadiantrucker9574
2 жыл бұрын
@@NutsandBoltswithTone I haven't gone through all your previous videos yet but some good vid ideas would be: usage of bearing splitters, usage of OTC push pullers, U joint replacement, CV or Fwd axle replacement, fwd press in bearing tool usage (you wouldn't believe how few good videos there is on these jobs). Hope I'm not too demanding lol
Awesome video brotha! I have most of these that you showed. I do not have the OTC hook though, & I think that will soon change. I have a whoopin bar made from a strut ram that usually delivers the needed power. And a Snap-on air hammer for items that still won't move. And that Dominator bar is no joke, that is my big bar as well. Thanks for the tips my friend! 👍👍
@NutsandBoltswithTone
2 жыл бұрын
Thank you Brotha. The S hook makes life so much easier and you will be very pleased with how well it works. Thank you for watching.
My uncle always says if it don't move get a bigger hammer I use 32 Oz ball Penn and 4lb sledge and I have an old railroad box car pin that 6" solid metal It's a press tool and make shit move tool. I want the 58" dominateor pry bar in green haven't found it yet. I've never owned an air hammer yet. Good ol hammer so under rated
@NutsandBoltswithTone
3 жыл бұрын
So you for sure need the Dominator but not sure it comes in green. I am a big fan of a big ass hammer but an air hammer is needed in some cases. Thank you for watching.
Big fan of Mayhew love the pry bars picks and punches from them
@NutsandBoltswithTone
3 жыл бұрын
I only have the pry bar and I like it
@CountryMileGarage
3 жыл бұрын
@@NutsandBoltswithTone Mayhew does a lot of rebranding for tool trucks like Matco and I believe Mac
@NutsandBoltswithTone
3 жыл бұрын
@@CountryMileGarage oh gotcha.
Great content as always. I as well use the hammer very frequently. Most times I bust out the brass hammer and pound away without having to worry I will mushroom any machined surface or threads. I actually have 5 different hammers each serving a purpose but when 💩 gets brutal, I bust out the torch with a sledge and a Pre Work out supplement 😁, I was JK bout the supplement but a sledge and a torch combined you can knock out the earth out of its orbit.
@NutsandBoltswithTone
2 жыл бұрын
Very very true. I appreciate you watching.
I’m gonna order the 48 inch version which is also 3/4 thick. I think the 58 might be a little long for me. But I’m sure it’s great when you really need that extra reaching ability. If I can try it with a 48 inch bar or something is wrong
@NutsandBoltswithTone
3 жыл бұрын
Very sweet. I am sure the 48 inch one is awesome as well. I already have a 48 inch prybar. Yes the 58 inch one if for the extra length when you need it. Thank you for watching. I am very happy with Mayhew Tools.
@felixf5211
2 жыл бұрын
IIRC, their 44" is made from 7/8 stock.
Must have the S-Hook. We use it all the time.
@NutsandBoltswithTone
3 жыл бұрын
Yessir that is a for sure must
OTC is amazing
@NutsandBoltswithTone
3 жыл бұрын
Yessir and that control arm tool is not expensive at all
Game changing combo👍
@NutsandBoltswithTone
3 жыл бұрын
Yes it is thank you.
With the s hook will it pop the ball joints out of knuckles like the fords with the pinch bolt that go up through the bottom?
@NutsandBoltswithTone
Жыл бұрын
You will also need to hit the arm with a hammer while prying on it to get it out.
Great video and tips, I also never use my pickle fork, just sits in my box
@NutsandBoltswithTone
3 жыл бұрын
Thank you man I appreciate it. glad to know you dont use the pickle fork
This was a good one I need to find the otc s hook. Ty tone
@NutsandBoltswithTone
3 жыл бұрын
Thank you for watching I have a link in description for the otc s hook.
Hey Tone check out Nupla hammers on amazon theyre the ones matco and cornwell sell at 1/3 of the prices, they have some good big ass deadblows... Also another thing is the Hyper tough USA made pry bars at Walmart 36" bar is only $20! Sometimes ill jam a pry bar in place and use another pry bar to pry against it for extra leverage. Great video
@NutsandBoltswithTone
3 жыл бұрын
Thank you very much for the info I'll check it out. Thanks for watching
Damn that Mayhew prybar looks like a beast! My biggest one is a matco 42”
@NutsandBoltswithTone
3 жыл бұрын
It is a beast and the price is awesome.
@TurboTyTy
3 жыл бұрын
@@NutsandBoltswithTone where did you purchase it?
@NutsandBoltswithTone
3 жыл бұрын
@@TurboTyTy there is a link in description for it from Amazon
I had the same air hammer i just bought the new one mt2916 and it is bad and the new matco pry bar handles are not as good as the ones you have
@NutsandBoltswithTone
2 жыл бұрын
Well that is a bummer. I actually use my Olsa Tools Pry bars now, only use the 4 foot matco one, Thank you for watching.
As Eric the Car Guy says..." Hit what it goes through".
@NutsandBoltswithTone
3 жыл бұрын
yup. Thanks for watching