Oscars Mustang Gets Lowered And Custom Wide Fender Flares!

Автокөліктер мен көлік құралдары

In today's episode were lowering Oscar's Mustang down on new springs and struts, and then building custom widebody fender flares and installing the 2016 side skirt.
Thanks to maximummotorsports.com for the awesome struts, springs and camber plates.
Thanks www.nittotire.com/ for always supporting our builds with the best tires.
And thanks to gomobiletires.com/ for getting our tires on our wheels!
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten

Пікірлер: 1 200

  • @matthewmachin5614
    @matthewmachin56143 жыл бұрын

    Sorry just lost me with those arches😩

  • @supernovaf1

    @supernovaf1

    3 жыл бұрын

    The front ones aren't as bad as the rear but both are no bueno.

  • @AJKlos

    @AJKlos

    3 жыл бұрын

    Really hope he sees that and changes it. You’re right the back is a lot worse than the front

  • @pilsonandrew

    @pilsonandrew

    3 жыл бұрын

    Agreed 🤢🤮

  • @Not-Great-at-Gaming

    @Not-Great-at-Gaming

    3 жыл бұрын

    IMO, the example didn't look good either. Was hoping it would look better on this car, but not so much.

  • @numberyellow

    @numberyellow

    3 жыл бұрын

    Yeah, i was liking this until the wheels and arches.. the vintage wheels look better, and there are better-looking ways to do the arches... also, that side skirt....what the actual fuck? Also, there's like no room for the suspension to travel, so every time he hits a bump, his tires are going to be rubbing.. It WAS looking awesome, now i think it's just gonna look kinda nasty at the end. That all said, at the end of the day, It's Oscar's car...he's the only one who has to be happy with how it looks.

  • @HazaVSGames
    @HazaVSGames3 жыл бұрын

    does anyone else think that these fender flares look terrible

  • @therestorationshop

    @therestorationshop

    3 жыл бұрын

    Gonna wait and see where this goes but yeah, looks pretty bad. I was hoping they'd make a nice car not a hack.

  • @toolzshed

    @toolzshed

    3 жыл бұрын

    They are going to add a wide body kit

  • @notologo

    @notologo

    3 жыл бұрын

    Yes i do

  • @davelangford2439

    @davelangford2439

    3 жыл бұрын

    @@toolzshed No their not, the flares are instead of a wide body kit.

  • @davelangford2439

    @davelangford2439

    3 жыл бұрын

    @@therestorationshop It's their cars and are doing what they want to do, the whole point of this is to do something different and fun.

  • @ruessrolloff2114
    @ruessrolloff21143 жыл бұрын

    I love the apocalypse car concept, but this just doesn't seem like the build for it. This car could be really nice and Oscar deserves a nice 'stang for all of the work you guys are putting into it.

  • @ironmonkey1512

    @ironmonkey1512

    3 жыл бұрын

    yeah it does seem too nice, but it could look good with a patina finish

  • @poeticlydead

    @poeticlydead

    3 жыл бұрын

    Chris can't seem to stick with a theme here.

  • @unknowngringo

    @unknowngringo

    3 жыл бұрын

    Preach... Oscar deserves better

  • @daniesalex7073

    @daniesalex7073

    3 жыл бұрын

    I suggest they build an apocalypse car for now and then make it a real nice body swapped stang

  • @andyhipe

    @andyhipe

    3 жыл бұрын

    Hes just lowkey jealous that his mustang was taken away so hes ruining oscars car xd

  • @electroncommerce
    @electroncommerce3 жыл бұрын

    Are those fender flares intended to be a joke? Poor Oscar, what a butcher job to a potentially super cool car.

  • @jonathanwells5119
    @jonathanwells51193 жыл бұрын

    I have never seen anything more hack job than cutting down the hub spigot 😂

  • @thirty3dev

    @thirty3dev

    3 жыл бұрын

    You don't live down Alabama boy, this is actually consider professional.

  • @luckycordel

    @luckycordel

    3 жыл бұрын

    @@thirty3dev Not in my shop! lol and yes I'm in Alabama!

  • @drewmiller3462

    @drewmiller3462

    3 жыл бұрын

    That grease cap is there for a reason..

  • @thirty3dev

    @thirty3dev

    3 жыл бұрын

    @@luckycordel lol

  • @jakob.k_design

    @jakob.k_design

    3 жыл бұрын

    Even before he said how he would solve the wheel spacer issue, I thought it is gonna be the jankiest way possible.

  • @TheMrbear186
    @TheMrbear1863 жыл бұрын

    This was going in a half-decent direction until this episode, now it's hurting. Cutting those hubs was really stupid, dangerous and unnecessary. Come on man

  • @jasong712

    @jasong712

    3 жыл бұрын

    It’s even worse now that they are running the stock wheels. There’s nothing to center the wheel anymore at least with the space there was

  • @TheMrbear186

    @TheMrbear186

    3 жыл бұрын

    I really love this channel but sometimes it's like.... Man what the actual fuck

  • @firesculpturevideo

    @firesculpturevideo

    3 жыл бұрын

    he cut them down not off.

  • @firesculpturevideo

    @firesculpturevideo

    3 жыл бұрын

    some of the people who watch this channel have zero knowledge of how to build a car.

  • @TheMrbear186

    @TheMrbear186

    3 жыл бұрын

    @@firesculpturevideo he literally said "cut these off" in the video and when they put the rotor back on you can plainly see there's none of it sticking through.

  • @Andres-wy5du
    @Andres-wy5du3 жыл бұрын

    Those fender flares suck and ruin the whole build

  • @farnthboy

    @farnthboy

    3 жыл бұрын

    Looks like something Jethro Clampett would do from the Beverley Hillbillies.

  • @docwyte
    @docwyte3 жыл бұрын

    That was some serious hackery on the hubs, even more so given you did it all for nothing. Also not a fan of the "flares"

  • @derrillbalshaw1199
    @derrillbalshaw11993 жыл бұрын

    You've got to make the wide arches flow into the side skirts somehow, otherwise they just don't make sense or look right. You gotta rethink those flared arches and side skirts.

  • @heckin_dinosaw

    @heckin_dinosaw

    3 жыл бұрын

    That'd what I was thinking, especially on the front, they need to flow into the bottom of the fender to look right

  • @wallyhutjr
    @wallyhutjr3 жыл бұрын

    those fender flares are tough to look at 🙃

  • @scottrogers9542
    @scottrogers95423 жыл бұрын

    I love this project as I did the last project. I have to say though, I’m not digging the look of these over fenders.

  • @OGMikey.
    @OGMikey.3 жыл бұрын

    Those wheel arches remind me of the cheap garden edging people use as a "fender flare"....

  • @floodx4947
    @floodx49473 жыл бұрын

    Not feeling the flares. :-(

  • @garrettkrieger6867
    @garrettkrieger68673 жыл бұрын

    Seems like a lot of Chris's ideas for being Oscar's car😂

  • @Legendary____

    @Legendary____

    3 жыл бұрын

    I feel like Oscar is gonna let him have it afterwards. He probably feels bad that his car was taken away.

  • @Bruh-rc3ys

    @Bruh-rc3ys

    3 жыл бұрын

    Probably just feels likes that because Chris is mostly the one narrating but Im pretty sure a lot of Oscar's ideas are in there too.

  • @OmarRodriguez1

    @OmarRodriguez1

    3 жыл бұрын

    i feel like it's more collaborative ideas, then it just seems like it's mainly chris cause he narrates the vid

  • @AlexMorales-ck7xf

    @AlexMorales-ck7xf

    3 жыл бұрын

    Probably because he’s the one funding it so Oscar doesn’t mind lol

  • @derrickfuson2793

    @derrickfuson2793

    3 жыл бұрын

    Ya nothing wrong with that it will all be awesome

  • @eduardogarcia3049
    @eduardogarcia30493 жыл бұрын

    I had to laugh as they hammered the body panels on top of a box that says fragile. Lol

  • @super_slo

    @super_slo

    3 жыл бұрын

    This is what I came to comment. 🤣

  • @victorgallardo6679

    @victorgallardo6679

    3 жыл бұрын

    Lol apocalyptic mustang because of the “EL” wheels laying around 😂👽👾

  • @victorgallardo6679

    @victorgallardo6679

    3 жыл бұрын

    One person never built car had to patented a name and hurt true car builders

  • @thefakeraymond

    @thefakeraymond

    3 жыл бұрын

    Same here, wonder what is or was in it lol

  • @timwegman5776

    @timwegman5776

    3 жыл бұрын

    Victor Gallardo what does this comment mean I don’t understand?

  • @christuem2086
    @christuem20863 жыл бұрын

    Connect the flares to the sideskirt and make something on top of the flares to integrate it into the body.... car could look nice 🤷‍♂️

  • @_DlME

    @_DlME

    3 жыл бұрын

    Exactly

  • @jordangarneau8817

    @jordangarneau8817

    3 жыл бұрын

    Something ! The bottom of the fender, start of the sideskirt and the rocker all ending away from eachother is making it look rough .

  • @ray24051
    @ray240513 жыл бұрын

    I say ditch the Apocalypse theme and make it a nice daily driver.

  • @daniemarais3660

    @daniemarais3660

    3 жыл бұрын

    Yes please

  • @iceicebuddy

    @iceicebuddy

    3 жыл бұрын

    Nobody asked for an apocalypse theme. It's kinda hard to look at.

  • @boosted_3478

    @boosted_3478

    3 жыл бұрын

    The piece of garbage theme

  • @GlorifiedGremlin

    @GlorifiedGremlin

    3 жыл бұрын

    Same I wasn't behind the apocalypse thing from the beginning

  • @mrgee4691
    @mrgee46913 жыл бұрын

    Sketchy as AF. Total hack job. Forget apocalypse build, that is downright dangerous chopping down the hubs.

  • @Ecosse57
    @Ecosse573 жыл бұрын

    i accidentally took some improperly labeled medication and the poison control center said to induce vomiting. one look at those flares did the trick.

  • @willmast119
    @willmast1193 жыл бұрын

    Last time I was this early you guys were building an elan.... oh never mind

  • @Rose.Of.Hizaki

    @Rose.Of.Hizaki

    3 жыл бұрын

    Denice Halicki was _'invited'_ over. Punch was served.

  • @Jenuin

    @Jenuin

    3 жыл бұрын

    Shots fired LoL =]

  • @matthiasmartin1975

    @matthiasmartin1975

    3 жыл бұрын

    No, the Lotus he built was an Evora, not an Elan. But I do get it. It's just that I _have_ to sperg out, especially when i am tired.

  • @Kylescaife
    @Kylescaife3 жыл бұрын

    You have my permission to copy anything you want 😘

  • @TheCreateOutdoors

    @TheCreateOutdoors

    3 жыл бұрын

    I love your mustang wagon. It's so sick.

  • @jeffreypetrellii7862

    @jeffreypetrellii7862

    3 жыл бұрын

    What a horrible “copy” though...

  • @akeemweaverwebster2762

    @akeemweaverwebster2762

    3 жыл бұрын

    It’s like seeing a Horrible cringe fake Ferrari made from a Honda Accord

  • @buenomini

    @buenomini

    3 жыл бұрын

    You don’t want to be associated with this. Your mustang is actually nice

  • @JOHNNYFUTS

    @JOHNNYFUTS

    3 жыл бұрын

    I always hated those flares with a passion!

  • @harryballzack
    @harryballzack3 жыл бұрын

    Has anyone heard of suspension travel? Not much room between that fender and tire.

  • @alfatasteless

    @alfatasteless

    3 жыл бұрын

    Glad I'm not the only one that noticed that

  • @mrbgpati

    @mrbgpati

    3 жыл бұрын

    If you're new to the channel... they're putting a wide body kit on it, so the oem fenders will be cut

  • @rendaddy_

    @rendaddy_

    3 жыл бұрын

    suspension travel is underrated, I don't know why so many prefer slamming over handling

  • @sebastianeiselt37

    @sebastianeiselt37

    3 жыл бұрын

    @@mrbgpati Well, well... If you mount the Flares in the Wheelarch, it doesnt really help... these are inpractical and looks terrible in my opinion :(

  • @MWood95

    @MWood95

    3 жыл бұрын

    @@mrbgpati They cut the OEM fenders in this video and it still looks way too low to function.

  • @raresvtsign4122
    @raresvtsign41223 жыл бұрын

    All of that weight is now on the studs, I see a wheel flying off in your future

  • @Pineapplxpress0
    @Pineapplxpress03 жыл бұрын

    Definitely a good choice going with the 2016 wheels instead of the lowriders lol.

  • @richardpugh3434
    @richardpugh34343 жыл бұрын

    Those fender thingies.....🙈 come on guys......

  • @cortniesmith3138
    @cortniesmith31383 жыл бұрын

    😆 “or cut this off” wait what? Why not have someone just turn them on a lathe to fit 🤷‍♂️ can’t tell me you guys don’t know someone who could do that

  • @luckycordel

    @luckycordel

    3 жыл бұрын

    I have to agree! Wheel studs are not meant to hold the weight of a car only to hold the wheel to the hub. The hub is what holds the weight!

  • @bearnecessitits

    @bearnecessitits

    3 жыл бұрын

    Literally the dumbest fucking thing I've seen this guy do. And I've seen him make a transmission case for a 200+ mph car active structure in a vehicle.

  • @DoughboyPathyUSA

    @DoughboyPathyUSA

    3 жыл бұрын

    Right? Or just buy some fucking hubcentric spacers. Literally $85 for their specific application from a number of sources, with a single google search

  • @93Proka
    @93Proka3 жыл бұрын

    The central hole is quite important because together with the screws it carries the weight of the car, and you cut off...

  • @esercitatolorenzo

    @esercitatolorenzo

    3 жыл бұрын

    the weight is carried by the camping force on the hub face. The centering collar does not carry the weight of the vehicle nor do the lug nuts/studs. Still pretty dumb to cut off the collars as they make sure the wheel is centered so you don't get any vibrations while driving

  • @silviodante9975
    @silviodante99753 жыл бұрын

    Lol at using a "little" spacer. Also, why are you lowering an apocalypse vehicle? If anything you'd want it lifted for more versatility.

  • @TheCreateOutdoors

    @TheCreateOutdoors

    3 жыл бұрын

    Chris mentioned this in another video. He said apocalypse doesn't always mean "Mad Max", they were going for more cyberpunk-dystopian inspiration.

  • @silviodante9975

    @silviodante9975

    3 жыл бұрын

    @@TheCreateOutdoors Thats not an apocalypse then. The literal definition of an apocalypse is an event involving destruction or damage on an awesome or catastrophic scale. Again, not something you'd wanting to be driving around your slammed, cobbled together mess of a car with wheels that are going to sheer off because you cut the hub rings off.

  • @TheCreateOutdoors

    @TheCreateOutdoors

    3 жыл бұрын

    @@silviodante9975 okay, maybe that was a stretch then. Not all apocalypses are set in a run down desert. Maybe there are still roads and highways in this version. I get it's not conventional sure, but it's not impossible.

  • @Nick17354

    @Nick17354

    3 жыл бұрын

    @@TheCreateOutdoors Yeah, but then, those roads or highways would no longer be maintained. I think it was a good height for the theme before the springs. Lowered it doesn't make sense as a post apocalyptic build.

  • @silviodante9975

    @silviodante9975

    3 жыл бұрын

    @@Nick17354 Exactly. Our roads are shit now when they're maintained, 2-3 years of no maintenance it would be destroyed

  • @94sicivic46
    @94sicivic463 жыл бұрын

    Love all the other builds except for these so far. They’re way off of the theme and seem like big hack jobs. Once the suspension travels those “fender flares” are toast. Cutting the hub is going to add to many loose lug nuts and ultimately a very unsafe car to drive. Their build and ideas but I’ve definitely expected more common sense from them 🤷🏼‍♂️.

  • @mrwhite7222

    @mrwhite7222

    3 жыл бұрын

    Not really since the adapters he bolted the existing hub has a hub as well. I agree that was so hack but It won’t be an issue

  • @HarryCrackz

    @HarryCrackz

    3 жыл бұрын

    Apocalypse builds are always underwhelming imo. The finished products look rushed and unfinished (by design), but you are left with a car you can't even drive on the road or enjoy.

  • @me3333

    @me3333

    3 жыл бұрын

    @@mrwhite7222 Since the original hubs were hub centric the spacers have no hub to index to and the lugs holding the spacers on can work loose and add to that the spacers extending the weight bearing point out causes more leverage on the hub itself calling for even more need for the hub center. Back in the 90's when everybody was putting wire wheels that stuck way out on their cars, some people I know had some real problems keeping the lugs tight so I bet it would be similar to that.

  • @Nick17354

    @Nick17354

    3 жыл бұрын

    @@mrwhite7222 Yes, but what is the adapter going to align to? It's going to vibrate like hell, not to mention safety. All of the shear force is now on the wheel studs, on a spindle that was designed to be hubcentric.

  • @standardissuesteve
    @standardissuesteve3 жыл бұрын

    "It has a really really good look..." NO IT DOESN'T!

  • @justinbattson7649

    @justinbattson7649

    3 жыл бұрын

    That's an opinion. You're opinion is that it looks bad but to Chris and Oscar it looks good, leave them be

  • @standardissuesteve

    @standardissuesteve

    3 жыл бұрын

    @@justinbattson7649 but that's the beauty of the internet, people are allowed to have opposing opinions. My opinion is that the flares are a mistake. Because the original guard is halfway across the tyre and only 1" above it, as soon as the suspension moves at all he'll destroy the guards, as there's no room for actual suspension travel.

  • @plus790
    @plus7903 жыл бұрын

    Cut it off or use smaller brakes? Where was the "MAKE a wheel spacer" option???

  • @super_slo

    @super_slo

    3 жыл бұрын

    I imagine that would have been the default if they had a lathe. But with all their friendly machine shops, it should have been dead simple... agree cutting the lip on the hub didn't seem the best option, but its done now, lol. I guess instead of spacers they can order new hubs... lol

  • @BBogart1989

    @BBogart1989

    3 жыл бұрын

    Base model GT brake calipers are the same calipers Ecoboosts have anyways. So that wasnt gonna play out either way.

  • @PedroM125

    @PedroM125

    3 жыл бұрын

    Are you imagining the wheel wobble?

  • @m98alissa

    @m98alissa

    3 жыл бұрын

    @@BBogart1989 No, in 2015 the base ecoboost got smaller brakes than the base GT. The ecoboost performance package got the same brakes as the base GT while the GT performance package got brembo brakes.

  • 3 жыл бұрын

    @@super_slo Don't forget that they have a filming schedule. Surely if there was enough time Oscar would have used a lathe to modify the spacers. But losing a day of filming costs them a lot more than a new set of new hubs.

  • @michaelcaraway2305
    @michaelcaraway23053 жыл бұрын

    After you finish making this an "apocalypse" car Oscar is going to make this a show car.

  • @youngtipz868
    @youngtipz8683 жыл бұрын

    Sorry chris I'm going with everyone else those flares look terrible it ruined the car for me

  • @MrRobschnieder
    @MrRobschnieder3 жыл бұрын

    Noooooo, use the "other" wheels from the "other" build lmao

  • @blueyoshi9233

    @blueyoshi9233

    3 жыл бұрын

    They don’t have them, it was taken away :/

  • @jamesarmstrong-jones5082

    @jamesarmstrong-jones5082

    3 жыл бұрын

    @@blueyoshi9233 they literally had them on the car and then took them off

  • @JohnMiller2

    @JohnMiller2

    3 жыл бұрын

    @@jamesarmstrong-jones5082 When they took his other mustang they probably took the König wheels as well.

  • @JohnDoe-zr6bk
    @JohnDoe-zr6bk3 жыл бұрын

    "I don't feel bad copyin' it!" Thought he learned something about copying ....

  • @DaxxThorgard-bp6to
    @DaxxThorgard-bp6to3 жыл бұрын

    I think that apocalypse cars are so underrated that seeing builds like this are so cool and inspiring to me

  • 3 жыл бұрын

    Whenever you say "Apocalypse" remember NOT to say "now". We don't want any trouble this time xD

  • @danstray2527

    @danstray2527

    3 жыл бұрын

    hahaha

  • @groundshakersociety6637
    @groundshakersociety66373 жыл бұрын

    Just saw an ad from omaze and they're giving away an Eleanor inspired mustang. Just putting that out there.

  • @drewmiller3462

    @drewmiller3462

    3 жыл бұрын

    Plus $20,000 cash. $100 gets you 1000 entries.

  • @markbennett6658

    @markbennett6658

    3 жыл бұрын

    Lamster66 yes Vtuned is trolling him for sure!

  • @TheMrbear186

    @TheMrbear186

    3 жыл бұрын

    I saw that same ad and thought about b is for build but the ad I saw definitely said "officially licensed" conversion

  • @kennetharreguin5720

    @kennetharreguin5720

    3 жыл бұрын

    @@Lamster66 YOU SAID YOU DID SEND IT ON VTUNED COMENT SECTION 8HRS AGO!

  • @djrose3
    @djrose33 жыл бұрын

    Was so glad to get the notification for a new “B is for Build” episode! The Stang is looking good! Was unsure at the beginning, but I’m seeing where you are going! Can’t wait for more! 👍🏻👍🏻👍🏻

  • @Not-Great-at-Gaming
    @Not-Great-at-Gaming3 жыл бұрын

    These apocalypse builds are MADness taken to the MAXimum.

  • @duecedsol
    @duecedsol3 жыл бұрын

    The HUB supports the wheel NOT the studs...cutting off the hub is definitely not safe fellas. Big brakes won’t mean anything when the studs shear and wheel falls off 🤦🏼‍♂️ Love the channel...figured you guys would know better!

  • @weedydgaf7546
    @weedydgaf75463 жыл бұрын

    Sorry bout this in advance, but that is not widebody.. i dont like it at all :/ every other choice is great, im berry happy with exept those widebody fenders, i mean widebody mud flaps

  • @johnpluskota6988
    @johnpluskota69883 жыл бұрын

    As long as Oscar is over the moon happy with his build? That’s all that matters. I know I’m going to love the final design.

  • @stlfly1
    @stlfly13 жыл бұрын

    So you're really just going to leave the fenders as those strips? 🥺

  • @antonczerwinske5910
    @antonczerwinske59103 жыл бұрын

    I think it is funny how much faster they build this second 60s mustang body swap

  • @trapjohnson

    @trapjohnson

    3 жыл бұрын

    Well, they did all the learning the first time around. So, sorting out "Well, that was nice, but what if we just dropped the whole thing this time" can be quite the savings.

  • @notonugroho504
    @notonugroho5043 жыл бұрын

    Me : apocalypse car Must be high ground clearance for off road conditions.. B is for built : lowering kit...

  • @craigcaggiano431
    @craigcaggiano4313 жыл бұрын

    Really cool how you and Oscar are blending 2016 with 1967 mustangs

  • @jamesnicholls5760
    @jamesnicholls57603 жыл бұрын

    I think this should be a awesome build for oscar hes done so much on this channel. Deserves a NICE mustang

  • @mikeoz6643
    @mikeoz66433 жыл бұрын

    I agree with the decision to rock the stock wheels, but those fender flares gotta go.

  • @givemebackmyactionhorrormo6524
    @givemebackmyactionhorrormo65243 жыл бұрын

    Everyone: A-P-O-C-A-L-Y-P-S-E Car Chris: New Mustang build Oscar: I'ma get a car either way

  • @mohamedeid729
    @mohamedeid7293 жыл бұрын

    This build is awesome cant wait to see it finished!!!!

  • @JNerv
    @JNerv3 жыл бұрын

    yess I've been waiting for the next episode ✊🏼

  • @JuanValentine
    @JuanValentine3 жыл бұрын

    In Mustang Kyles build those flares looked good because his wheels were super wide. You have stock wheels so those flares look fxckin terrible.

  • @josecastro5503
    @josecastro55033 жыл бұрын

    Dope man. Can’t wait to see it done

  • @philtucker1224
    @philtucker12243 жыл бұрын

    Now that you’ve decided to go back to the bigger wheels, please reorder some new hub centres to replace the ones that you sliced back. We love Oscar and we want him to live long and prosper (thank you).

  • @robgregorski2182
    @robgregorski21823 жыл бұрын

    I liked the way they where going untill the "wide body kit" but all of it can be undone to make it a clean cruiser, but dam that side skirt and flares...... not what I was expecting

  • @racerx94
    @racerx943 жыл бұрын

    Cutting the hub off..?

  • @bernm5874
    @bernm58743 жыл бұрын

    When I saw the notification I clicked so fast!

  • @reubenbunter143
    @reubenbunter1433 жыл бұрын

    I cannot express how much I love these videos

  • @jwiggs82
    @jwiggs823 жыл бұрын

    Damn Maximum Mototrsports reached out to you guys? That’s impressive, they are THE premier Mustang modding company.

  • @BigBrownie96
    @BigBrownie963 жыл бұрын

    Oscar is so talented, AMAZING

  • @theroburrito
    @theroburrito3 жыл бұрын

    Wouldn't it make more sense to cut the spacer and not the hub?

  • @arevo8702

    @arevo8702

    3 жыл бұрын

    Bro spacers suck

  • @daszieher

    @daszieher

    3 жыл бұрын

    @@arevo8702 cutting the hub sucks more.

  • @Notfast86
    @Notfast863 жыл бұрын

    With every progress video you guys at B is For build do I get the urge to start a project car, Thankyou guys 👍🏼

  • @benjaminkamben4908
    @benjaminkamben49083 жыл бұрын

    Loving it! Keep going and I can't wait to see the final product.

  • @gtd6288
    @gtd62883 жыл бұрын

    Shouldn't an Apocalypse Mustang be lifted, not lowered? I imagine the roads aren't so good in apocalypse land. I just don't get the theme here. Looks less "Mad Max" and more "Maxamillion goes to Vegas". Looks cool though. Also for wheels, some steel Cragar soft 8's would look sick on there.

  • @thomasmaagaard
    @thomasmaagaard3 жыл бұрын

    Putting 2016 "wide body" on 60's body on 2016 chassis😂😂😂👌👌

  • @mactipiak

    @mactipiak

    3 жыл бұрын

    Mustangception

  • @ianmurchie1567
    @ianmurchie15673 жыл бұрын

    I like the look of this. I'm glad you decided to make it look more old school rather than new old. Your tying it all together nicely 😊🖒👊🍻

  • @MrCrazedTV
    @MrCrazedTV3 жыл бұрын

    I love this build. Not sure why everyone is complaining. I love how you guys are doing thi nwith crap laying around in a driveway and having fun with it. Not every build needs to be a show piece. Some can be for fun. And honestly this looks dope anyway.

  • @brentspang9092
    @brentspang90923 жыл бұрын

    You're going to have vibration issues now that the wheels are no longer hubcentric.

  • @Saurion1
    @Saurion13 жыл бұрын

    Modern wheels are definitely a better fit. While I really like MustangKyle's widebody, I think you guys should rethink how you approach this. It's not looking anywhere near as good as Kyle's. Also the wheel wells are not big enough, that thing will rub like crazy.

  • @tomkitchen2764
    @tomkitchen27643 жыл бұрын

    And it was going so well.

  • @3089io
    @3089io3 жыл бұрын

    Y'all are flying on this build. Good work! Also, I appreciate you keeping in the footage of trying the 5.0 flares that didn't work. Sometimes build videos get edited down so much they lose everything I care about. Can't wait to see the final form, I can see where it's going and it's rad as heck.

  • @xnadave
    @xnadave3 жыл бұрын

    "We kept the good brakes!" World: APPLAUSE!!

  • @daver.9971
    @daver.99713 жыл бұрын

    I must be pissy tonight, cause I'm on an unsubscribe to crappy KZread content, look like a 10 year old built it

  • @RobertBrownbrowncone
    @RobertBrownbrowncone3 жыл бұрын

    Can't wait to see you guys having some fun with this righteous ride!

  • @ryanmcclendon3309
    @ryanmcclendon33093 жыл бұрын

    Thank you! For taking those schmelenore wheels off! Newer wheels look much better, imo.👍🏼

  • @Jenuin
    @Jenuin3 жыл бұрын

    12:28 LoL so we cut the body panels off the new mustang to then cut the body off the old mustang to put over the chassis of the new mustang to then reinstall the new mustang panels creating one god awful mustang sandwich 🥪 mmmm 😋 LoL ( just making a joke ) Edit: Those gender flairs are yuck. But it is an apocalypse car soooo ? I would had old school Flared it but cut stretching and adding metal for a stock moulded look.

  • @_DlME
    @_DlME3 жыл бұрын

    imo those wheels are hideous 🤢🤢 edit: just got to the part where they switched back. Thank god

  • @mrray55
    @mrray553 жыл бұрын

    Oscar is a savage fabricator. Great job so far.

  • @TimothyMoore
    @TimothyMoore3 жыл бұрын

    I love that they are building this thing in the dirt. Don't know why but love it! 👍🏾

  • @nathanjones5653
    @nathanjones56533 жыл бұрын

    Those over fenders are ugly, an melt down those “period correct” wheels. Whoever made those created a sin. 😂😂😂😂

  • @JuPac420
    @JuPac4203 жыл бұрын

    Those coil overs are beautiful 😍 great sponsor for providing those!

  • @tayzer22
    @tayzer223 жыл бұрын

    One of the most awesome builds I've seen.

  • @mickffc3280
    @mickffc32803 жыл бұрын

    Been waiting on this come out since last episode! Keep the videos coming!🙌

  • @xrmerkur
    @xrmerkur3 жыл бұрын

    🐎 B is for Build is the perfect channel for Mustang fanatics 🤩

  • @papel_pe
    @papel_pe3 жыл бұрын

    What makes me really excited is the fact that he's cleaning his inventory of scrap parts... like he's making space for something bigger! I wanna see what he has in mind

  • @theunpretentiousvegan8593
    @theunpretentiousvegan85933 жыл бұрын

    B is for Build is pretty punk rock about everything. Not sure if that's a good thing, but it's worked so far.

  • @gtuttle4
    @gtuttle43 жыл бұрын

    The old school wheels looks so much better! I sure hope you make it a fastback!

  • @AstroTools
    @AstroTools3 жыл бұрын

    Maximum Motorsports is the real deal. Great stuff

  • @JNerv
    @JNerv3 жыл бұрын

    I'm so glad you guys are doing this again. I was SO upset to see the Eleanor go.

  • @traxxasslash95

    @traxxasslash95

    3 жыл бұрын

    Shhh we don't use that name around here

  • @JNerv

    @JNerv

    3 жыл бұрын

    @@traxxasslash95 my apologies 😶😶😶

  • @MrWigV25
    @MrWigV253 жыл бұрын

    Ones again it’s a good vlog Congts Mr. Wig. Is here to.

  • @PowerHousePerformanceLLC
    @PowerHousePerformanceLLC3 жыл бұрын

    Amazing Maximum Motorsports sends you emails out of the blue but they can't answer a simple email about an order when trying to give them business. Crazy good customer service.

  • @MisfitMuttsGarage
    @MisfitMuttsGarage3 жыл бұрын

    this is looking killer! can't wait to see the how this comes out.

  • @stephenmoncrieff2056
    @stephenmoncrieff20563 жыл бұрын

    I’m liking this . I think I am one of the few people who likes the sedan over the fastback .

  • @eduardogarcia3049
    @eduardogarcia30493 жыл бұрын

    Love all your content Chris. I’ve gotten tired of most automotive content channels, but always enjoy watching your channel. Keep at it.

  • @mitchellgodwin
    @mitchellgodwin3 жыл бұрын

    That burp was hilarious!😂

  • @punkinsgarageandpaint8299
    @punkinsgarageandpaint82993 жыл бұрын

    I love these wheels... PERFECT choice

  • @akeemweaverwebster2762
    @akeemweaverwebster27623 жыл бұрын

    The crazy part of this video is that Cris shows a wide body over fender that’s vastly superior than the crap that they put out. I believe in B is for Build and the guys that’s why I’m so heard on the channels I love. This is a suggestion on how you should go about your build on the mustang get much bigger wheels and much wider fenders go crazy with it

  • @diavolo-o
    @diavolo-o3 жыл бұрын

    wow guys) its amazing) the best look i saw last time)

  • @LegionOfWeirdos
    @LegionOfWeirdos3 жыл бұрын

    Those wheel arches! YIKES!

Келесі