If you make music and I can use it hit me up - miscastterrain@gmail.com - this ep features tracks by Wrighteous and also The Gizzards. Thank you

@sin721

11 ай бұрын

Whats the song at the very start? Its kind of a banger

@Miscast

11 ай бұрын

Jaylikethealphabet - GET IT

@sin721

11 ай бұрын

@@Miscast Yooo, thanks

@stuff6218

11 ай бұрын

I do. I'll have a look through the archives and see if anything is Miscasty enough!

Trent, to his model alone in his studio: “Why are you like this?!” Me, eating Doritos on my couch: “I’m sorry Miscast, I don’t know either.”

Love the "i wont get distracted" cut to a full squad of goblins made because of distraction. These are such adorable lil guys!

@vedranlucev1837

11 ай бұрын

"We have removed everything but your tools from the workshop so you won't get distracted, and finish the darn project." "You fools, I am my own distraction!" *finishes every other project instead, starts a dozen more*

@SugarCandyMiniatures

11 ай бұрын

@vedranlucev1837 I feel like there's no room in which Trent can't find a way to do a project in. Especially if it's to avoid another project that was due months ago

@AcuteGoblinitis

11 ай бұрын

Goblins are such a good distraction though, they're my weakness too. Making 40k ork meganobz? Here's a full squad of gretchins! What's that, sculpting ogors? Watch it, a warband of swamp gobbos is coming for you!

The classic scenario of knowing you have one particular miniature and going through literally hundreds of miniatures because you know you have it in there somewhere. I am familiar with that.

@Miscast

11 ай бұрын

Chaos bits box organisation is great for finding stuff you forgot you had, bad for finding things you're actually looking for hahah

@Bluecho4

11 ай бұрын

@@Miscast To riff on Kill Six Billion Demons: "He did not seek the right bit, and so found it with little effort."

Curtis's sculpts are so idiosyncratic and fun; a perfect match for Trent's work.

My friends and I had issues once with casting some WW2 tanks. Found out some resins were temperature sensitive when enough mass was present (internal mass set as expected but the outer surface cooled off too quickly to set properly). Luckily, one of us knew about this so we only wasted two castings before the stove was recruited. Looking forward to your next video as always.

I really like the “so this is what I got done this week” format of the recent videos. Really inspiring to see so much cool stuff coming from the workshop.

Absolutely nothing else gives me creative energy like these vlogs 😌

@Merlin_262

11 ай бұрын

same!

@gavinalyea6673

11 ай бұрын

Big agree. Just finished my first scratch build Mordheim board thanks to this channel.

Those Boglander arms are super useful. Interestingly, to your point about different casting materials (and you probably already know this, but maybe the audience don't), the arms for the grot conversions are from the Ramshackle Games Boglanders set, and they are actually cast in a different resin from the bodies! The bodies are single pieces and need to be durable and low-cost, while the arms are thin and delicate and need to be detailed and flexible, so Curtis cast them in different resins. I'm sure that's the case for a lot of models, but it was the first time I'd seen it, or at least noticed it. Also, I love the necrollusk boar and the Willie cart. Just amazing. And the trukk concepts! And and and ...

5:00 - yes! Yes it is!

I haven't even finished the video but, as someone who has also been reorganizing their bits box lately: it feels great, doesn't it?

@TJtheBee

11 ай бұрын

I just reorganized mine too! Discovered I had tons of stuff that could fit together, so now I'm making fake flower arrangements, but weird.

You give me such creative boosts its actually unreal. Your vlogs makes me want to go out and create.

Those are awesome!!! Perhaps your mold was off-gassing something? I have had one mold that made sticky casts the first few batches, then after letting it sit for months it cast fine, and I was guessing that might have been why, but just a guess. (The sticky casts took a little over a year hidden in a cabinet to cure hard!) I’m glad the baking fixed yours!!! If I ever have that happen again I’ll have to try that.

@Miscast

11 ай бұрын

Good thought... I bet you're right, maybe heat speeds up the offgassing idk.

I love to see the pages of your notebook, it always interests me to see what people draw for their notes and thoughts. Thanks for sharing

Man, Miscast videos always makes me want to make stuff. Sadly I don't have a lot of space or cash to spend on it. If only I could channel all that creative energy into my other projects.

These recent videos have been so great, seeing the creative process in what feels like such an organic form is awesome and inspires me in a way that very few hobby videos are able to

12:00 that reminds me so much of daily driving a linux system. I have little to no technical knowledge and sometimes it seems like everything just suddenly does or doesn't work one day, and some seemingly random tinkering fixes the issue.

I don't play Warhammer, I don't build models, don't paint Miniatures, and I barely even play table top games... but I absolutely love your channel and the things you build. Thank you for posting

Way back when 3E or maybe 4E had a Feral Ork rules list show up in White Dwarf I made an ork army out of a bunch of fantasy orks I had and I also used night goblins as grots. I turned one of those boar chariots around and stuck a GI joe gun in it to make an artillery piece. Also had a squiggoth out of a thrift store triceratops that I swapped the head on. Love what you are doing with your plague orks!

Trent, watching these videos really takes me back. I was rubbish at playing the games, but I mainly enjoyed customising & painting the models. I love this channel so much

@Miscast

11 ай бұрын

Thank you brother, hope to see you again soon!

I guess it’s fitting since you called your channel miscast. Fun video nonetheless, thank you for taking us along for the ride.

Just finished making some plaster molds for ceramics for the first time, absolutely horrible experience lol (took four times the time I thought it would and one broke) I am so ready to sit down and watch Miscast toodle around talking about all the cool stuff

can't wait to see those angler fish!

Love the creativity mate, super exciting to watch!

Would maybe be cool to put a little Gretchen on top of one of the Killer Kans waving a sword about or something as if he climbed up to get a better view? Awesome vlog as ever!

@Miscast

11 ай бұрын

Love this idea!

This video was great inspiration for my current chaos themed goblin army. Great job as always, man!

Your brand of chaos is exactly what this hobby needs in the era of over serious creatives. Also did you use anything like vaseline on your sculpting tools when making the master? Washing masters before moulding might help in future.

Why the music hitting harder in the intro god daaaaaaaaaaaaamn got me dancin ngl

Here's a terrifying idea... Slaaneshi orks. I'm sort of designing my own minis. Though will go through the easy way of blender or CAD and printer... :)

Love the creativity and the videos! Keep them coming! You are so inspiring to watch 😊

Man, that was a wild ride. Thank you so much for sharing your process. You inspire me to keep creating each week!

when you use the bottle once, while not having shaken it enough, you pour off more of the lighter stuff and the ratio is off afterwards.

If you are casting urethane into a new silicone mold, you will have to bake the silicone mold first in an oven for 4 hours at 160 f. The silicone after curing gives off alcohols and moisture that must be baked out .

Miscast Sundaaaaaaay

Yess, video on my birthday!

@Miscast

11 ай бұрын

Happy Birthday!!

Gonna make my first silicone molds tomorrow... I foresee some miscasts in my future

@Miscast

11 ай бұрын

Its part of the process!

@euansmith3699

11 ай бұрын

They aren't "miscasts". they are scatter terrain 😄😄😄👍

@619Slipk

11 ай бұрын

@@euansmith3699 I was thinking they would be destined to wander the insides of the bits box, but sure, scatter terrain suits them well too

I am so happy when i watch your stuff, because it makes me feel less bad for the dumb hours I find myself writing.

I love your little notebook. my viscom teacher in highschool used to call those kinds of rough draft sketchbook drawings "Bus Sketches" because you were supposed to do them whenever an idea came to you i.e on the bus etc. love your work

This is so sick!!! What an awesome build challenge!

Just can't get over the placement of the guns on the killa kanz

"While that resin is cooking, I wanna let you into my brain a little bit." - Nononononono! *Meme* I imagine Trents thoughts to be more confusing than Tzeentch :D

I looove Curtis' Dunger models! I've got a few that I'd got to paint up

Nurgle diaries returning??!! 8:31

@Miscast

11 ай бұрын

I SAID BE COOL!

Yes! Need a shot of can next to irk figure for scale

The best ideas/results come from "getting distracted". I have recently started noting all my ideas and thoughts through Obsidian via the Zettelkasten method and have noted a significant increase in my ideas/results!

Hey More Miscast!!!!!

Seeings as you threw your lot in with Tzeentch, you're lucky you get a messed up a cast, and not a doorway to another dimension opened inside the mold, with all kinds of awful noises and smells emanating from it.

Looking at the date on the mould... You filmed and put this out today! What the hell man 😂

Those look like a combination of the Woolies from Samurai Jack and the Muppet Sweetums and Im in absolute love. I need 30.

Trent, I have an idea! You have a lot of miniature guns right? Make a monster made of them!

4:18 Oh no (excitedly).

Admirable tenacity. I hope you figure out what made that one kick. Cool to see the process

You are the reason I'm considering picking up warhammer to be honest. I can't decide if I want to do Tyrannids or Tzeench though...

@Miscast

11 ай бұрын

Both good calls! I like the look of those new nid models

your dodgy old silicone didn't go off all the way until you cooked it. This is why many mold shops post cure their silicone molds

Lovely work mate! I love that Willy model by Pablo! 🤌

Maybe it was some water trapped in the mold?

Hand sculpting my first attempt at bits today. Making LANCER mechs XD

If that Nergle diaries 2 think comes to fruition, that will be pretty cool

I love watching Miscast bro. And like this one feels like something amazing, like is much creative energy and pure joy the entire ride, no down or slow points. Freaking incredible. But don’t feel the need to constantly chase the same energy Trent or Brent (I forget your name a lot lmao) we love you and your content no matter what you make, so keep going and also don’t forget to give unsolicited advice when we aren’t expecting it or ready it for like you said a few videos ago :) P. S. With the car ideas of them being animals, imagine a snail shipping truck

Those are so awesome😁

Why do I never get notifications that a new Miscast video is out... KZread fix you shit and let me enjoy this amazing man making amazing things!!!

A bitz box to die for.

Oh nice ones! But a question, are you gona make Khorne Orks? 👀

Do we ever see these super cool dudes painted?

10:15 why not detergent and toothbrush for that master residue?! 😅😊 *it must be purified by flame*

Are you planning to make material about painting your custom kit bashing miniatures ??

how do i get my hands on the crab arms and gun holding hands you used on the goblins, love the chaos grots tons, for sure gonna clone the night goblin body - chaos grots. banger job on the whole chaork project

@Miscast

10 ай бұрын

They're ramshackle games bits, I think from their latest kickstarter. Just send em a message if they're not on the site yet.

You should look up a wierd game called hylics, its a clay animated rpg that i think you could get a lot of inspiration from

love the idea of the 2nd edition looking digga nob

I see cubes, I click. Looking forward to seeing what those are. Chaos tzeench cube dreadnought / deamons?

Pretty sure the silicone had cure inhibition from the figure you made the mold of. Probably had sulfer in it.

I suppose chaos just works like that sometimes

the sphincter deffdredds

You didn't include it in your video, but check your mixing cups. If the resin cured in those but not in the mold, then it likely is not a bad mix ratio. I've had things take extra long in a pressure pot. You might have simply been jumping the gun as far as de-molding. Leave the parts in there a bit longer than usual. Another thing, did the tacky castings ever cure completely? If so, then, again, it might have simply been that you did not leave them in the pressure pot long enough. There's also the consideration of how volume, pressure and temperature are related. It's been way too long since I studied those, but I vaguely remember Boyle's Law being a part of that discussion. It could be that the increase pressure is affecting the temperature which in turn is affecting the curing. But I'm guess at that. I really don't remember.

12:18 😂

I think once you did the first failed cast you soiled your whole bottle of resin. If its true you didnt shake it well enough, you would have gotten more of a certain ingrediant in your first batch, and less of it in your subsequent batches. Ive never done this tho, so idk Looking forward to more! Edit: just finished the video. Looks like your last cast was successful. So i agree with you. Why did it work? Lol

@callmeray7705

11 ай бұрын

I was thinking the same thing and it could still be the case, just so happened to balance out with multiple unshaken pours (so by random chance Trent got a good ratio in the end) I think it's more likely that some solvent/water based thing was on the inside of the mould (I assume theres a matrix that keeps the silicon stable and during the cure it evaporates and some might have been left in if it was used quickly) and cooking it forces it to evaporate. But could easily be something else entirely.

I'm surprised he never got into turnip 28

*Deep breath* WOOOOOOOOOOO!

I want the whole army. But when those killa kans are on sale I will through that cash all the way to Oz.

_DIGGANOBZ!_

Have u tried setting ur molds outside so the sun can cure it???

AYYYY huge shoutout to ramshackle games they fucking rule

Chaos Orks are menacing enough in my imagination. But you Sir take it to a level I couldn't even think of. I love your style and how you approach whatever an artistic life throws at you. Please never stop. You are an inspiration. At least for me 😁🤘 PS: And why complain about miscast models? Ain't that the point of your channel's name? 😜🤣

Trent - maybe it's my north american showing but I'm so confused by the temps where you are. I thought Australia was always hot?

song in the beginning ???

@Miscast

11 ай бұрын

Jaylikethealphabet - GET IT

I believe your mold didn't cure completely or possibly absorbed natural oils somehow. Potntially something from your A+B process where maybe oils have seeped through the bottle/s somehow?

@Miscast

11 ай бұрын

Interesting! I'll investigate!

@billyspocketlife

11 ай бұрын

@@Miscast Honestly just by best guesses,, I believe if it's the containers then it would be similar to plastic yellowing overtime maybe something due to manufacturing that has taken a while to develop. your other cast might not have done the same because it's in a controlled area / more internal that doesn't affect the cast or that you can see.

Now you gotta fight someone with them on that board you recently finished

Didn't actually watch the vid, just commenting on the title. Orks by definition are Chaos, in the purest sense. They do what they do for the love of it. Fightin is the reason for being and they aint in it to impose the will of the gods. Chaos could take a lesson from them and lighten up.

Perhaps your mold was wet?

Nifty

Did you find out why the previous ones did not cure properly ??

@Miscast

11 ай бұрын

Not exactly sure, but after heating the mold they all cured fine after that

@martynjones3978

11 ай бұрын

@@MiscastIf the 45mins in the oven thing solved it!! Could there have been moisture in the mold or the silicone of the mold wasnt quite thoroughly cured?

*heavy breathing intensifies*

why, Willys a digganob!

Why? Ask Brent maybe he knos.Why? Ask Brent maybe he knows

Trent. I saw nothing 😉

Was this your first cast with alien clay? Maybe there was an issue between the silicone you were using and the clay? I'm not sure. ...out of curiosity, would you recommend the monster clay, or the alien clay? Debating getting some myself, one or the other.

I love almost everything you make, but i am very confused about the killa kann puckered asshole design 😅

These videos definitety didn’t inspire me to have a commissar riding a squigasaur. Definitely not yarrick