@Tom's Driveway sorry i know this is an old video... but very helpful.. hopefully you get time to reply.. I was hoping to see the options under transmission... does this allow you to change the gearbox diff ratio? My gearbox blew up and the one I fitted is a different ratio causing cruise control to not work and the shift up light to stay on..

Hello Tom! I have a 2013 Insignia (before the facelift) and I would like to ask if it's possible to make the parking radar display go segmented. By that I mean when I put the car in R I can see how close the things are in the front but when I back up I only hear beeping not seeing any bars going up. I hops this makes sense to you..

Hi Tom, very interesting video, I've got a Corsa d 1.2 energy 2013. Dash has Bluetooth /radio display computer that sticks up on dash..(cd30??) I was wondering if it would be possible to enable the fuel computer with no issues.Some 'energy' models seem to have fuel computer but ours hasn't. Are you in North Staffordshire?,any advice appreciated, thanks, Dave

Hi Tom, could you tell me what firmware version your opcom has? thank you so much!

Tom was just wondering is there a way to clock the corsa with opcom

I'm trying to connect to diagnose airbag light and pretensions. Do we need the car pass or something as so far I've been unable to get the car to talk back respond.

Hello! Thanks fov video! Could you tell - what could choose in menu "Special" at the year choice page?

Hi mate do you have the link where you bought your interface from? Cheers

Hi, when I get to checking interface mine won’t connect to the car for some reason, don’t really know which of the options to select. Any ideas? Thanks

how to change the km on the speedometer and activate the on-board computer?

Can radio code be found with this opcom device? Mine beeps and shows radio safe message. Got no code for it ...

Does anyone know if there are options for the Twintop cars, roof controls and monitoring?

Trying to do a 'DPF Replace' using the Opcom on a A13DTC engine, but the option isn't there. Does anyone know of any tool to do this (as struggling with the Opcom). Thanks in advance.

Would I need this to change my damaged ECU

thanks

How do you install the software onto ur device, it doesnt show up

my car was originaly set to 30000km oil life or 365 days afther changing that oil life function to disable and back up to enable the INSP0 appeared and I can't reset it.... now my only way to get rid of this insp 0 is to set oil life function to disable and reset...

Are you using windows 10 or windows 7?

Hi thomas, iv had new ecu cloned but car wont start. Looks like no power coming into the 4 injectors. Any ideas

Thanks for the video man, really helpful. May I ask what is the security code that you say ? Because it’s something that you also mentioned it in another video of yours and you said that you bought it.

@TomsDriveway

5 жыл бұрын

Oh thank you very much! Its a code which allows you to program the different modules in the car. Otherwise it wont let you program basically. Its individual to your car.

@fabiovasconcelos511

5 жыл бұрын

It's called "Car Pass". It has all the information from your car, VIN number, security code, etc...

@TomsDriveway

5 жыл бұрын

The whole card is called a car pass, but the security code is for programming...

@AT-qc7yw

5 жыл бұрын

@@TomsDriveway where do you get the code from

@TomsDriveway

5 жыл бұрын

From main vauxhall dealer costs like £30.

I get a program display message on the radio display on my corsa 2012 will this be able to help?

Need HELP....PLEASE Help. Vauxhall insignia 2009, I tried to replace the Fuse box with another one, it did not work as engine not starting, Immobiliser activated. So put the original one back again. Now most things working, engine starting, but noticed headlight, wiper and AC not working? Can you please tell me what's wrong? How can I fix it?

Is it possible to change software as i heard complaints where you have to change the software of TIS-2000 to without DPF but with rail pressure regulator?

@TomsDriveway

4 жыл бұрын

I am not sure sorry.

Hi, can you help me, my op com doesn't let me change the gateway configuration after replacing the abs pump

hi, I got op-com unit but my 2014 software does not respond at all. but i can communicate to ECU using 2010 version. could you please share 2014 software version you use please.My car is 2013 version. thanks in advance.

I have error of bcm in diagnosis but in real I have a blinking light of glow plug in dash and poor fuel economy in my corsa d 2008. It's consumers 10 litre per 100 km and RPM jumps from 800 to 1000 . Please help if anyone have any idea about this problm

Could we read radio code for CD30?

Hi, I have an astra 2011, the menu bottom give no response at all, do you know how I can change that?

@TomsDriveway

5 жыл бұрын

Sorry I dont understand what you mean?

I’ve extracted from the disk, I connect it as you have in the car and click diagnostics and I get, please connect your interface to the USB port, or install the usb driver! Sorry mate I’m thick, can you help me out what I need to do?

@emmanuelhud1

4 жыл бұрын

You need to install the driver, I will send you a link to a video that worked for me

Is a 2014 Corsa D 1.4 with A14XEL engine available in the clone software? Just asking for a friend. :p

@TomsDriveway

5 жыл бұрын

Hahaha, I'm pretty sure it is if you pick the facelift year ones.

Hi can you please measure voltage when you start the car with nothing on just low beam lights? And can you please measure voltage when you steer left and right? Im having a problem when l turn steering wheel voltage drops from 14v to 13v and them car shuts off power steering. So l need to turn off and then start the car for power steering to come back. Thanks

@TomsDriveway

5 жыл бұрын

I sure can, might be a day or too tho. It is normal for voltage to drop slighrly when steering and i know corsas do have issues with the electric steering not working until restart

@d.s.9011

5 жыл бұрын

@@TomsDriveway Did you check it??

Very good video was wondering do you have a link to buy this myself please

Do you need the car pass for adding the extra tab to the gid?

@TomsDriveway

5 жыл бұрын

No you don't actually as it's the infotainment system.

@babymorrison

5 жыл бұрын

Thanks for replying 😊 I wouldn't have known about all this I'd I hadn't seen your channel thanks! 😁

Hi i have installed opcom and interface test fine but when I connect to car error comes interface communication error or interface not power from car anyone can help pls

Hi, can you give me a link on where you got this from ?

@muh1h1

4 жыл бұрын

0:16

Hi, which are the best OPCom and software for my 2009 Opel Corsa D 1.2 Z12XEP?

@TomsDriveway

5 жыл бұрын

Unfortunately I can't recommend any I'm sorry. I just used Ebay for mine

@xinixxagnix201

3 жыл бұрын

just a china clone with all the hex files so you can swap versions.

Need some help mate Its saying interface not found And I'm stuck now lol. Any advice?

@ernest5114

4 жыл бұрын

Okay the opcom gave you a cd right?

Hi mate, just trying this today, its exactly the same as yours, every option i choose im getting communication error with interface, lights are on opcom, laptops recognises it, ignition on..identical to you, only dif is mine is 2013 d...but nowt!! Any ideas

@upyourarse1

2 жыл бұрын

Ill answer my own question, there a lot of fakes, thanks for your relply mate

@mattbarker581

2 жыл бұрын

@@upyourarse1 did you find one that works? I'm thinking of getting one

@upyourarse1

2 жыл бұрын

@@mattbarker581 eventually. If your on facebook search for opcom jay. He sells proper ones. 99% of the ones on facebook use ‘copy’ chips in the connector and wont recognise car

Will this also find a missing security code ?

@mariant1799

4 жыл бұрын

yes but you need have 1.39 version also you can change flash version kzread.info/dash/bejne/ZKmczcF8nJizp5s.html

I have opcom, where do I get the security code from?

@joshsanderson5512

3 жыл бұрын

I got mine from not the log book but the flip cover it came in in the side

@xinixxagnix201

3 жыл бұрын

body > instrument > eeprom menu (only v1.39) read sec code. Or use a modify clone Carprog or orginal ofcourse.

Absolutely can't get it to work. The interface works. Furthest I've got is getting as far as programming a key transponder only for programming to fail. That was on v2010. OpCom 2012 and 2014 won't communicate with ECU at all.

I just brought opcom from eBay but I can't get it too work saying ecu doesn't not reply

@liamcarr2001

4 жыл бұрын

Got a similar problem. It can't identify the engine code or or talk the thr engine atall. Will work with the other stuff but nothing with the engine

@mohammedpervez

4 жыл бұрын

@@liamcarr2001 hi thanks for the reply I keep getting ENGINE LIGHT ON SAY ITS P0404 is a diagnostic trouble code (DTC) for "Exhaust Gas Recirculation tried clearly the but still comes bk how doi get rid off it can u do it in the opcom thanks

@xinixxagnix201

3 жыл бұрын

@@mohammedpervez Clean your EGR and check wires, use multimeter for values, if this is ok the ECU is corrupt and you need another one.

@mohammedpervez

3 жыл бұрын

@@xinixxagnix201 hi thanks for the information but egr value is blocked

Wish I had a Corsa D, this isn’t compatible with the E Good vid tho ! Thanks x

nothing wrong with reset ecu. haha mad fella

Could you help me please

Where do you get the security code

@TomsDriveway

5 жыл бұрын

From you vauxhall pass, if u dont have one of them. You can buy it from.the vauxhall dealer for £30 with your v5.

@surfshop7552

5 жыл бұрын

@@TomsDriveway What is a V5

@TomsDriveway

5 жыл бұрын

@@surfshop7552 in the uk is who is responsible to tax the vehicle. Sorta like proof of ownership of the vehicle.

@sonnyday6210

Жыл бұрын

Can you deactivate tpms. Where is the security code.

Is there some tunning with an opcom?

@TomsDriveway

5 жыл бұрын

Unfortunately not

Jakie jest firmware?