This is amazing. Just purchased your plan and I’m looking forward to trying it tomorrow. Thanks Terry

Thank You for letting us "look over your shoulder" while you were 'horsing around'. I have seen the results before, but never the process. You do cut a might fine horse (or unicorn, or whatever your imagination would wish. I appreciate the time and thought you used in doing the video. as a 'newby,' all the efforts of the many people that do the videowsis an enormous gift. thanks again...

You're the bandsaw magician, thanks for sharing.

Enjoyed your presentation, very artful and masterful pattern work with the saw., not breaking the blade...the thin side-pieces could be put on a board for decor a coat rack or towel or anything, children's furniture, a catchy phrase with the trick ponies for decoration...really liked the simplicity of technique, fun and rewarding...thx🖒👍

Very sharp! Nice job.👌🏽

This is just wonderful. Thank you.

I saw you on LumberJocks! I have ordered the carter stabilizer guide and am happy to see it being used. I looks like it does well. On 3D patterns I sand my sides that are considered wastes and make 'fragile' hanging ornaments. Thanks for posting this video and sharing. ~Suzanne

@terryspade441

9 жыл бұрын

Suzanne Jordan You’re welcome, glad that you liked the video. You will really like the carter stabilizer.

Great job my friend. Seems you love your bandsaw as much as I do. Thanks for sharing your skills.

Сразу видно, когда Мастер чувствует и материал, и инструмент. Perfect!

Great work- thanks for sharing.

Bello...sencillo...y facil de hacer...felicictaciones

Awesome. Salute from Turkey 🖐️

Thanks Terry. Superb!

Loved your video, have now subscribed.

Just got new band saw 14 inch bench top. I make toy lorries what a tool ! Brother that was a brilliant vid. A tadge advanced for me at present every time I use the saw I seem to discover and learn something Great fun. The grain on those horses at the end was brilliant, pine ? But what an item to make and take advantage such a pronounced grain. Thanks very much. Happy days.

@terryspade441

6 жыл бұрын

Thank you, band saws are a lot of fun. I make most of the horses from doug fir 2 x 4's.

Great job nice keep up the great work thank you

Thanks - I learned a lot from this video

That's pretty cool!

Good job TS

Nice Job

Great video, I see a couple more spots to drill a relief hole.

Ellerinize sağlık. Çok güzel olmuş.

you are really good!!!!

@terryspade441

7 жыл бұрын

Thank You!

Дуже гарно!

It's great to see others people's technique i 2 small Nails in the cut out instead of tape a lot quicker and no air bubbles to get in your way of the pattern .... still a great technique get the job done...

@terryspade441

5 жыл бұрын

Thank you, I tried the nails, liked the tape better. I couldn't stop at just 2 nails, and the doug fir grain would push the nails in the wrong direction. I ended up cutting through a few nails. They were soft nails from a small nail gun. So they really didn't do lot damage to the band saw blade. But they weren't good for it either.

gracias maestro, seria interesante un ajedrez.

Thank you

Excellent

thank you

Great video. I cut a few 3D items myself. I have never tried the tape method. I usually cut top to middle and than bottom to middle leaving a small but significant section uncut on the pattern, I do this for both sides. I then flip to the front patterns and cut all the way through. Once complete I take my cut offs realign and finish the small sections I left uncut. Not sure if that makes sense.

@terryspade441

5 жыл бұрын

I can see where that might work better on some patterns. But I think everyone uses what works best for them. I started out using nails. Wasn't real happy with that. I saw some people in the scroll saw forms using packing tape. So I tried it and it works for me.

◄👨🚀🌏 ► *_Оригинальные лошадки!_*

great job, i see it now in 2020.

Hi Terry, where can I get this pattern? I have the Raindear which the children love. Kind regards Steve SJS woodturning

@terryspade441

7 жыл бұрын

www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1

Love it...:-) Now can you make a bear standing ...;-)

@terryspade441

6 жыл бұрын

An interesting idea. I'll have to think about that.

Thank you 🇩🇿🤩

nice video. what kind of band saw are you using? thanks

@terryspade441

7 жыл бұрын

A 14 inch delta band saw platinum edition, that I picked up on Craig's list a few years ago. I'm real happy with it.

Many thanks for a great video. I’m new to the band saw carving and really appreciated the info on type of blade as well as technique. Some beautiful grain patterns which types of wood are you using? Again very many thanks. Tim

@terryspade441

3 жыл бұрын

I am using doug fir. It is the wood used in 2 x 4's and other dimensional construction lumber here on the west coast.

👏👏👏👍👍👍

Hi, I was watching the video's on the Carter Stabilizer, and when I watched yours my Granddaughter feel in love with the horses. I just got my stablizer and have it installed. Can you share the horse pattern? or where can I get it? Thank you.

@terryspade441

4 жыл бұрын

Glad you enjoyed the video. Sorry for not answering you sooner. I am in California and PG&E shuts my power off and on. I sell the pattern on etsy. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1&crt=1

Nice video...what size blade are you using ?

@naynay5637

5 жыл бұрын

1:22

I see the carter stabilizer on, but I have a qestion. Do you use the downside stabilezer too?

@terryspade441

7 жыл бұрын

No, you adjust the bottom guides all the way back away from the blade.

@gaglikabar

7 жыл бұрын

Thaks a lot!

very nice work, just bought your pattern, trying tomorrow. But, do you free hand draw that horse on every time?

@terryspade441

5 жыл бұрын

I make 2 templates end and side from ¼ inch plywood. This makes it easy to line up on the blank and avoid small knots and flaws in the blank.

My cutting room floor is knee deep in awe sh!ts too. Nice work and great looking horses. I want to try using CA glue or hot glue in place of tape on my next batch. Have you tried either ?

can i put carter stabilizer on sears 10 inch band saw? if so how and where can i buy it

@terryspade441

7 жыл бұрын

I don't know, Carter makes about 25 different types of their stabilizer, to fit a large variety of band saws. Here is a link www.carterproducts.com/band-saw-products/band-saw-stabilizer

Nice job , will try one, but m very poor at drawing

@AdamPflug

4 жыл бұрын

Buy his pattern on etsy, print it out, and glue it to the front and side of the block of wood. No drawing required. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1&crt=1

Really neat! But not likely with a cheap Harbor Freight 9” bandsaw.. 😔

Id like to purchase the Horse Pattern and more available, Please provide me website...Thanks

@terryspade441

Жыл бұрын

You will find the link to my Etsy page in the description area just below the video. Just click the more link.

How you get the bandsaw blade to make those tight turns ?

@terryspade441

5 жыл бұрын

Carter stabilizer guide, 3/16 inch blade, and practice.

@kingdomfreedom8323

5 жыл бұрын

@@terryspade441 Nice ..

MUY BUENO MAESTRO.........QUE MEDIDA DE ANCHO ES LA HOJA DE SIERRA ? GRACIAS

@terryspade441

4 жыл бұрын

3/16 de pulgada 10 dientes por hoja de lobo de madera.

DOES THAT CARTER STABILIZER fit a PORTER CABLE SAW ?? SUPER NICE VIDEO

@terryspade441

2 жыл бұрын

I don't know, Carter makes about 26 different types of their stabilizer, to fit a large variety of band saws. Here are some links www.carterproducts.com/band-saw-products/band-saw-stabilizer The one I use fits a lot of band saws carterproducts.com/band-saw-products/band-saw-stabilizer/standard-model-1-std1

is that 1/8 or 1/4 inch blade?

@terryspade441

2 жыл бұрын

3/16 inch 10tpi, so it's right between 1/8 and 1/4 inch.

Why my bandsaw gets snap very easily.. i do it slowly still snap

@terryspade441

6 жыл бұрын

What type and size is the band saw? What is size the blade that you are using? Make sure that your guides are set up properly. And don't over tension your blade.

Would love a reindeer pattern where can I find it

@terryspade441

5 жыл бұрын

A copy of the pattern is in my comment near the bottom of the comments. lumberjocks.com/projects/73046

I'm assuming you have to use a blade stabilizer, right?

@terryspade441

2 жыл бұрын

Yes, I use the carter stabilizer. I put my finger on it at 1:27 mark in the video. It works well for tight curves.

@searl1

2 жыл бұрын

@@terryspade441 Yep, thanks for the response. Carter doesn't make a stabilizer for my machine :(

Nice job could you use a scroll Saw on the flat part of this job

@terryspade441

2 жыл бұрын

I'm sure that you could.

where have you buy the Stabilizer?

@terryspade441

5 жыл бұрын

www.carterproducts.com/band-saw-products/band-saw-stabilizer

@TheArrikatchy

5 жыл бұрын

Thank You @@terryspade441

hi, terry, what size blade are you using plz? ty rob.

@terryspade441

3 жыл бұрын

I am using a 3/16 inch 10 tpi timber wolf blade with a carter stabilizer.

@roberthossack286

3 жыл бұрын

@@terryspade441 thanks for answering, do you have to use a carter stabilizer? cause i dont think you can get them in uk.

@terryspade441

3 жыл бұрын

@@roberthossack286 No you should be good, without the Carter stabilizer.

@roberthossack286

3 жыл бұрын

@@terryspade441 thanks terry, i purchased your template, but kept messing up, si ive ordered a 3/16th blade, cheers, rob.

Beautiful !! Is it possible to have the drawing? A thousand thanks

@terryspade441

9 ай бұрын

I sell the pattern on etsy link is in the description.

@bbdellaregina

9 ай бұрын

@@terryspade441 thanks

How many saw size please

@terryspade441

7 жыл бұрын

I am using a 14 inch delta band saw. I provide 3 different size patterns in my plans. The medium and large sized patterns can be done on a 14 inch band saw. The small sized pattern should be done on a scroll saw.

Didn’t see the link for the pattern

@terryspade441

Жыл бұрын

Looks like you found it. Thanks for watching.

merhaba Terry videonuzu çok beğendim. daha fazla figürü nerede bulabilirim. tekrardan teşekkürler.

@terryspade441

2 жыл бұрын

You can find lots of patterns on Pinterest. I sell the horse pattern on etsy. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1&crt=1

where can i get the pattern please

@terryspade441

2 жыл бұрын

I sell the pattern on Etsy. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1

where can i get the template please ??

@terryspade441

2 жыл бұрын

I sell the pattern on etsy. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1&crt=1

Potresti mandarmi il disegno grazie

this is so cool how I can get the pattern terry????

@terryspade441

6 жыл бұрын

I sell the pattern on Etsy. www.etsy.com/listing/241500025/band-saw-scrool-saw-horse-pattern?ref=shop_home_active_1

@Zampedrano

6 жыл бұрын

Terry Spade ok thanks you sir

sir your band saw machine company name

@terryspade441

Жыл бұрын

I have a delta Platinum edition 14 inch bandsaw made about 1999, and a Jet JWBS-14CS 14 inch Bandsaw.

why

L

Just purchased your plan and I’m looking forward to trying it tomorrow. Thanks Terry

thank you