I have a 2020 Pro. You have me considering a shell now.

@PointShiftDrive

4 жыл бұрын

Totally worth it!

This is the exact configuration I am doing and you gave me a lot of inspiration to go with. Thank you for the video share! Great looking rig.

This is everything I’ve been considering. Got my Tacoma last week. Need a shell and want the drawer system. Same problem. 2 car seats in the back. Also no where for the dog so that rubber topper idea was great. I also have some boat carpet left over from a project I’ll probably drop in on top. I plan on camping out in my bed for fishing tournaments. This is great. Still undecided on what shell. I like yours with maybe the addition of windoors. The smartcap evo is cool but expensive. Thanks for the video. Definitely helped.

What a great review! Thanks for your insight, and you have sold me a Leer. For all the right reasons.

@PointShiftDrive

3 жыл бұрын

Thanks for watching!

This is truly one of the best explanations of rationale for purchase, great job!

@PointShiftDrive

Жыл бұрын

Thanks for that! Glad you enjoyed the video

Beautiful truck!! You have done awesome things with it.

@PointShiftDrive

3 жыл бұрын

Thank you. I have more on the way. Stay tuned

Your truck is BEEEAUTIFUL!!! I'm original owner of a 2001 TRD and LOVE it.

@PointShiftDrive

3 жыл бұрын

Thank you

Great informative video. Thank you.

Great video. Very informative

I got the same shell but I had them coat it in rhinoliner and I had the windows on the side swapped with aluminum doors that lift up.

Nice video! Great points!

Great looking rig! 👍

DIY a window knob, with small low profile plastic knob and double side heavy duty tape. And for the hole from the outlet, you can get a big rubber pipe grommet to cover it

Love the build brotha

@PointShiftDrive

Жыл бұрын

Appreciate it!

Great video. Thanks

@PointShiftDrive

4 жыл бұрын

much appreciated !

Cool truck

Love the look. I have a 2020 VOODOO BLUE. I want that look.

@PointShiftDrive

3 жыл бұрын

Voodoo blue is sexy

Starting to become a fan of ur channel.

@PointShiftDrive

11 ай бұрын

Thank you

Thanks for the upload and great review... just put a deposit down this morning on that same 100XR. Subd 🤘🇺🇸

@PointShiftDrive

3 жыл бұрын

Paul_ HD1 you will love it! 👍🏼

@paul_hd1875

3 жыл бұрын

Point.Shift.Drive Thanks. For what it’s worth... my rep talked me out of the Windoors completely, said they are guaranteed to leak. Since it’s a short bed, and it’s a $700 upgrade for them, I didn’t order the Windoors. Your video showing the pet screens was clutch... my wife loved the pic of your doggies:-)... and helped get her on board with the $3K purchase. Thanks for influencing her lol:-) Cheers.

@PointShiftDrive

3 жыл бұрын

Paul_ HD1 happy to help! 🐶

Had the Leer 180 cap on my Taco.... provided a lot of space in the bed for gear and camping.... no roof top tent needed. Cap was solid and flawless. Ordered the same cap for my new Tundra.... with some extras I found I wanted after owning the Taco for 6 years.

@PointShiftDrive

3 жыл бұрын

imxploring thats great to hear. What is your favorite add on?

@imxploring

3 жыл бұрын

@@PointShiftDrive Had the headliner in my first shell.... great option. With my new shell I ordered the headliner....factory roof rack (any leaks are on them.... better than me drilling a new shell) and the removable front slider window in the shell. Makes cleaning the windows between the cab and shell easy and allows access between the two for animals and everything else.

@PointShiftDrive

3 жыл бұрын

@@imxploring Sounds awesome!

Some ABS plastic can be cut to size and cover up that pocket left open from repositioning the outlet.

Looks like a 4Runner but BETTER! Slick truck!

How well can you see through your rear view mirror and to traffic behind you?? I typically tint pretty dark but seems like a good idea not to tint the back cab windows and only lightly tint the cap rear window (just enough so people can see whats inside)

Great video. Just bought a 2020 taco. It was instant love at first drive. Love the shirt. Where can I get one????

@PointShiftDrive

3 жыл бұрын

thanks! Glad you love the truck... its a great rig for sure. Here is where you can get the shirt: amzn.to/3cWvkL1

Nice, I’m waiting on my camper shell & that what I’m going with. Good job 👍

I love your set up, hands down one of the best looking rig, I have Leer 100XR too on my 2021 OR and want to install pop lock. Question: Did you install two pop locks for shell and tail gate or its just one lock that locks both tailgate and shell? Do you have a video of installation? Thanks

@PointShiftDrive

2 жыл бұрын

Thanks! There is a separate lock mech for the top lock.

Good video

@PointShiftDrive

3 жыл бұрын

thanks for watching

In August I bought a 15 TRD OR access cab with the 6' bed and the same leer shell already on it. I camped in it and it poured rain and I discovered that every single window leaked around at least 1 corner of the frame. I don't know if it's because of the extreme climate here (Alberta Canada) or if the gasket they use on the windows wears out that quickly everywhere else. I ended up buying a roll of butyl tape and pulled all the windows off and used butyl tape around the frames and after a heavy soaking in the car wash they seem ok now. Unfortunately the spline/weather stripping around the glass is peeled out in one corner of one window and it still leaks there but it's minor compared ot before.

I have a 2019 pro thinking about a shell so I can lock my bike mbt inside the bed of truck an protect it from everything. Thanks for you insight. Its been hard to find good info on this. An my tail gate is still a Manuel lock lol think about a pop lock as well.

@PointShiftDrive

3 жыл бұрын

Yeah you can’t go wrong with a shell. And the pop lock is a must!

your truck is sharp ... i have always had labs ...my trucks were always higher than stock ... and my dogs always jumped up into my truck and jump out...i discovered as they aged they had joint problems in their shoulders and it was due to the impact from jumping out to the ground ... dont let em do that !!!

@PointShiftDrive

3 жыл бұрын

I am aware. Labs are awesome but so susceptible to joint issues as they age.

If you don't have an electronic rear locking system, the dual locking rear door is easier to set up an interior locking system (as long as it has a frame). You can just drill holes next to the locks and insert dowels preventing the mechanisms from turning when you are inside...

@PointShiftDrive

2 жыл бұрын

Good tip!

Damn Dogs, they make you do shit! I was perfectly happy with my 2nd gen reg cab. Had my tent mounted with 4" rise bars and the top of it was even with the top of the cab. The kids are out of the house and the wife doesn't like wheeling and camping. It was the perfect little adventure mobile for one person. Life was good. Then we decided to get a little German Shepherd puppy. Damn thing is only 6 months now and barley fits in the front with me. So, I just ordered a SnugTop with the Sportsman package. The Sportsman package gives the roof a 500lb dynamic load rating, so the tent will be fine up there. I hope the pup likes his new mobile dog house!

@PointShiftDrive

3 жыл бұрын

Congrats!

Great video! A few questions here: 1.) What brand roof racks for both the cab and shell? 2.) What size lift on your truck? Thanks, Keep up the good work!

@PointShiftDrive

3 жыл бұрын

The roof racks are Prinsu . The lift is a 2.5 king shock. I have other videos that go into more detail. you can find them on my channel: kzread.info/dash/bejne/m4JkyNeyfZiWc7Q.html thanks for watching!

@justinandras6096

3 жыл бұрын

@@PointShiftDrive Thanks for the quick and detailed response! One more question, is that a canopy tent attached to the shell rack? If so what brand is that? Thanks again for your help!

@PointShiftDrive

3 жыл бұрын

@@justinandras6096 I have an ARB canopy attached. It’s great. Extends about 5 to 6 feet

I got a 2012 Camry Le and I'm saving up very very slowly. One day! Stay safe.

@PointShiftDrive

4 жыл бұрын

Now is a good time to buy a new truck. Lots of incentives... Just sayin ;)

Great detailed review. Do you know if Leer make a reinforced model or option that can hold more weight on top?

@PointShiftDrive

Жыл бұрын

I don’t believe they have anything stronger. But I can say that it can support around 300lbs. Maybe more. I have loaded it up to about that weight with no issue.

I have a 2019 TRD PRO. did you have to lift truck to fit bigger tires. pro comes lifted but like to know and like to keep the stock lift but not sure how big to go with the tires. Great video.

@PointShiftDrive

4 жыл бұрын

Edward Roe I cover that in this video: kzread.info/dash/bejne/m4JkyNeyfZiWc7Q.html But at a glance: 1) cab mount chop 2) 285/75/17 tires (basically 34s) 3) tire well trimming 4) install adjustable top control arms and get as much caster out of your alignment as possible

To help with that side window you could get yourself a small suction cup to close that window. Just a thought so you wouldn’t have to climb into the truck just to close the window.

@PointShiftDrive

3 жыл бұрын

I tried suction cups already but after a while they fall off. The solution that I went with that ultimately solved it was a stickem GoPro mount. They are perfect! And I could always throw a camera on there for interesting angles

Laughing at your shirt. My grandson is just learning to read so on a camping trip last weekend he was sounding out everything. He came to my truck and said poppa what does TRD spell? So I explained it. He came to the Tacoma on my tailgate. He knows the word TACO but ma give him fits. The his eyes lit up and he yelled TACO..MA from that day forward everyone refers to my tacoma as TACO MA

@PointShiftDrive

3 жыл бұрын

😂that made my day! Thanks for sharing and glad I made a little impact :)

Great review. Have one on order. With the PopLock…how does it lock the shell back lift gate? Is the shell lock tied in (electronically) to the new tailgate lock? Thanks

@PointShiftDrive

Жыл бұрын

you need to make sure to order the extra locking module. then wire it to one of your doors locking mech.

I'm thinking of getting bed shell. I see you have the Total Chaos bed stiffeners. I have an antenna mount on them right now. but when I get a bed shell it will obviously will be covered. I see you also have the Rago Fab antenna mount. Did you modify it in any way? Does it sit flush to the side of the bed?

@PointShiftDrive

3 жыл бұрын

Actually that Rago mount works perfectly with no modification. Highly recommend

Test drove a 4Runner in hopes of buying one new....a complete slug!!! Heavy & underpowered. Immediately test drove a Tacoma, instantly knew I wouldn't be buying a 4Runner that day. Love my Tacoma and the options with having a truck and performance outweighed my initial desire to get a 4Runner.

@PointShiftDrive

3 жыл бұрын

I went through the same realization. Welcome to the taco club!

Did you get the keyless entry feature when you purchased

I prefer a taller cap as I have the 6 food bed and sleep in the back. The extra 6 inches makes the difference between comfort and being to tight.

@PointShiftDrive

3 жыл бұрын

Makes perfect sense. Though I don’t think the taller shells look as nice. But that’s subjective.

@adamstackhouse2051

2 жыл бұрын

Leer 180

beautiful setup....I am trying to build a similar build. what is your rear suspension setup? What are you using to keep it level?

@PointShiftDrive

10 ай бұрын

Thank you. NXT icon heavy duty.

Great video, but am curious what cab rack and shell rack you are using?

@PointShiftDrive

Жыл бұрын

Prinsu designs

When you used the key fob to unlock the tailgate it seems it unlocked your camper top rear door also. did you purchase the Leer keyless entry handle ($289)?

@PointShiftDrive

3 жыл бұрын

Yes. It has a module built in for locking and unlocking. Basically a life saver

Leer here....just mine is the 100xl model. Slightly different on the side window configuration but all else being the same. Also see a set of bed stiffners on your rig, good decision 👍👍

@PointShiftDrive

4 жыл бұрын

Oh nice! I think Leer has it down when it comes to the Tacoma. And yes, bed stiffeners are pretty much a must if you plan to carry any bed weight. Thanks for watching!

@PointShiftDrive

4 жыл бұрын

Oh nice! I think Leer has it down when it comes to the Tacoma. And yes, bed stiffeners are pretty much a must if you plan to carry any bed weight. Thanks for watching!

Was wondering how you got the pop lo ck to lock the cap latch. Did you get one for the cap as well?

@PointShiftDrive

3 ай бұрын

Yeah, you just get to

Just wondering how long that one center lock will stay closed because I have seen many get worn out and may pop open and some roads. I prefer the ARE middle lock because it a lot more sturdy

@PointShiftDrive

4 жыл бұрын

Hard to say... I have used mine for 3 years with zero issues. I think it has more to do with abuse and ultimately how you take care of your shell. But to your point, things can fail and wear out. ARE shells included in that. So food for thought. Buy what works for you!

did you build those bed stiffeners yourself? I notice the horizintal leg..doesnt have a vertical edge..for strength. I like yours..pleez let me know ..thanx!

@PointShiftDrive

4 жыл бұрын

These are made by Total Chaos. You can check them out here: www.polyperformance.com/total-chaos-bed-stiffener-bolt-on-2016-tacoma-pr?TCS-48676&gclid=Cj0KCQjwudb3BRC9ARIsAEa-vUuwNDgRDzfWZmqUvaCE_2y8FokKKijhm6I1YZYgLyNn5Am3jCa-8mcaAlRdEALw_wcB

Get a command clear hook to stick on out side window to be able to slide from out side

I wish Mountain Hatch made a Bamboo or hardwood option for the tailgate...that flat hard plastic is slick as shit when its wet or a little dew or condensation gets on it.

@PointShiftDrive

3 жыл бұрын

You aren’t wrong. That plastic surface can be brutal. I recommend the weather tech rubber protector. It’s super thin and light and fixes the issue with slickness.

I dig the rock sliders, may I ask which brand?

@PointShiftDrive

3 жыл бұрын

They are CBI

My husband has been wanting a leer shell for his Tacoma also. Did you have to special order your camper shell?

@PointShiftDrive

Жыл бұрын

I went to a local truck customization shop. They asked me what features I want and they place the order. Took about 8 weeks to get delivered and installed.

Looking at a 2018 OR with 14k miles, has same shell. Asking price 28.9 concerned about shifting issues and fuel pump recall though. Does the shell or bed leak at all? Is there a window on the shell to line up with the rear sliding window on the truck? New subscriber, great channel Thanks

@PointShiftDrive

4 жыл бұрын

Good questions... So there is a sliding glass window against the truck rear window. I typically just leave that window open and toggle my truck window from the inside any time I want some air or to talk to my dogs. as for leaks, no leaks from the windows BUT if the topper wasnt installed properly with sealant then you may see some leaks at the corners where the bottom of the topper meets the bed of the track against the cab. The good news is if you have that issue you can just shoot some silicon in there and close off any holes and you should be good. Its also worth noting that the only time you should see leaks from there is when you are washing your truck. not during rains or anything because of the angle of the where the holes are. Hope that makes sense. Id buy it and not worry. you can always make adjustments if needed or sell it all together if you arent happy with it. Thanks for subscribing and watching!

@billkiessel6682

4 жыл бұрын

@@PointShiftDrive Thanks for the in depth reply, enjoy your rig!

So If I get the Thule tracks for the leer I can install a prinsu rack on it later? Do you need some type of adapter for that?

@PointShiftDrive

Жыл бұрын

The prinsu rack system needs to be mounted to standard T slot rails.

Currently in the process of purchasing the new “Lunar Rock” Trd pro, how difficult was it to get you camper shell in that exclusive “Barcelona Red”?

@PointShiftDrive

3 жыл бұрын

I just went to a custom truck store and ordered it. It did take about a month to get though. I think they make them from scratch when you order versus having stock. However that was all pre Covid. Good luck!

@elvisjustice6629

3 жыл бұрын

@@PointShiftDrive appreciate the feedback! Thank you

I can see you're not concerned with the bed leaking. For everyone else, here's a tip: *BEFORE* you buy the cap at night use a flashlight to find all the open places in the bed. What I was really interested in was the paint match. Yours is only slightly better than mine. I got $500 off because of the difference but what I realized later was that the cap was painted correctly. I could tell because it matched the tailgate perfectly. When I put my vehicle next to another Barcelona red Tacoma I can tell my vehicle has a slightly different tint.

@PointShiftDrive

9 ай бұрын

Mine didn’t leak and it shouldn’t. Wasn’t a concern for me.

@mr-peabody

9 ай бұрын

@@PointShiftDrive All beds leak. If they didn't, they would fill with water after the rain. That's why they have drainage holes. Also when you get the factory tonneau cover they give you two rubber blocks that fit up in the front corners. These are to fill the gaps between the composite bed and the metal sides.

If you don't mind me asking, what'd you pay for it? Maybe you mentioned in the video but I couldn't find it. I just got quoted by a local shop for $3668 but with the top tier of add-ons for the 100XR since my intentions are to use as a camper.

@PointShiftDrive

Жыл бұрын

I paid $2300 like 5 years ago. Inflation?

Thanks for the video. Two questions: 1) Can a 7.0 surfboard fit in the access cab? 2) Can a 6ft. tall person sleep comfortably in the bed?

@PointShiftDrive

4 жыл бұрын

The surf board wouldnt fit inside the truck... just be clear about that. however thats whats great about having a roof rack. As for sleeping in the bed, yes but you need to sleep diagonal if you have the shortbed like I do. I bought the Decked system which flattens the bed and makes sleeping back there a breeze. Hope that helps

I’m sure you lost some headroom with the decked system. Will that be an issue? I like the setup

@PointShiftDrive

Жыл бұрын

I don’t find it to be an issue. But it does reduce the headroom by 12 inches.

Hmmm, I noticed the writing that comes up on the video and says XR 100- Holds roughly 15-225lbs static weight. By any chance did you get that mixed up with dynamic weight? One man and a tent plus a rack is definitely more than 225lbs???

@PointShiftDrive

3 жыл бұрын

I believe 400lb is max static load.

I just received my new Tacoma sport. And today I ordered Decked for it, and now I am looking at caps/ toppers . I’m trying to decide on a cab height or just a bit taller. If you have some time could you take a measurement from the the deck to the top of the cap? If you mentioned it in the video I missed it. Thanks.

@PointShiftDrive

2 жыл бұрын

Unfortunately I don’t have my cap any more. If you check my latest videos I am now running a Super Pacific. However I did that measurement which is similar. It’s 29inches to the top of the SP. however my leer was even with my cab roof. So just do that measurement and you should be good.

@Annie-zf7xi

2 жыл бұрын

@@PointShiftDrive Hay thanks ! That helps. I want to be able to sit up and get in and out without feeling like coffin. I may go with the leer 180cc. 😀

@PointShiftDrive

2 жыл бұрын

@@Annie-zf7xi just remember that decked detracts 12 inches of height

@Annie-zf7xi

2 жыл бұрын

@@PointShiftDrive Ya I know, it so hard to shop this out on the internet and try to think of everything. Thanks

@PointShiftDrive

2 жыл бұрын

@@Annie-zf7xi totally get it. Hope This helps. 👍🏼

How do you like the back cab for the kid seats?

@PointShiftDrive

3 жыл бұрын

It’s doable. Not that roomy but doable

A-R-E-IS-THE-BEST....

Throw 1 of those pop sockets on th sliding window.. or something similar

Is your truck a short bed or long bed because I’ve been trying to find one for my short bed

@PointShiftDrive

3 жыл бұрын

Mine is a short bed.

How is the shell camper in the rain? Any leaks?

@PointShiftDrive

2 жыл бұрын

No leaks

Did you install your racks? and if so how long of bolts did you use for your tracks for your racks?... and did you install your Decked Drawers?

@PointShiftDrive

3 жыл бұрын

Yes on both counts. The kits come with hardware. I just used what they provided.

@OneFlewOver1776

3 жыл бұрын

@@PointShiftDrive ...thanks but did you drill every hole in the tracks?

@OneFlewOver1776

3 жыл бұрын

@@PointShiftDrive ..also but was your shell beefed up from factory to hold mor weight?

Would a dog kennel fit between the Decked and top of the camper shell?

@PointShiftDrive

3 жыл бұрын

Depends on the size kennel but I’d say probably not.

I camp damn near every weekend and I'm getting sick of tents. A shell keeps me dry, off the ground and protected

@PointShiftDrive

8 ай бұрын

And they are just so much more comfortable

What model shell is this is this the R or the XR which one is it if you don’t mind me asking.

@PointShiftDrive

2 жыл бұрын

I explain the model in the video

How much for the shell and how long would it take to install?

@PointShiftDrive

9 ай бұрын

Mine cost about $2300 installed

Super glue a black knob to the outside of the sliderside widows....?

@PointShiftDrive

2 жыл бұрын

GoPro mount FTW

Can you open the rear windows from inside the truck bed?

@PointShiftDrive

3 жыл бұрын

Yes. That’s actually how they are designed to work.

How much did it cost you buying the cover alone? What add ons included?

@PointShiftDrive

3 жыл бұрын

Iverson Patricio it was about $2200 with everything installed.

@PointShiftDrive

3 жыл бұрын

Forgot to mention that the price included the slide style windows and roof rack rails. Also carpeting and LED on the inside.

What you think about rsi smart Cap

@PointShiftDrive

Жыл бұрын

The Smartcap is nice. I think it has a better look than a traditional shell but the price is steep. The functionality and practicality of the Smartcap might be better than the Leer but is the extra $ worth it? I dunno. Also I dont think the look is everyone’s taste. It stands out more so than the Leer. My shell just blended in with the truck. The Smartcap stands out.

How does the pop and lock system lock the cap door??

@PointShiftDrive

Жыл бұрын

Separate module.

I have a Toyota tonneau cover and I on gravel roads my bed fills up with dust. How do I prevent this?

@PointShiftDrive

2 жыл бұрын

You probably can’t completely but I would look to add rubber seals all the way around the cover and also check the cubby to make sure there are no holes for dirt to get through.

My dad has a 2019 Tacoma and he is thinking of getting a bed shell. He is wanting to get one for our dogs. Is it good for dogs to ride in?

@PointShiftDrive

4 жыл бұрын

Its perfect for dogs! just make sure you get sliding windows so that there is enough air circulation for them to stay cool on hot days or after intense play. Then you should be good to go!

@benjaminblount2691

4 жыл бұрын

Point.Shift.Drive thanks for the info

@PointShiftDrive

4 жыл бұрын

@@benjaminblount2691 no prob!

Static weight capacity is 600 pounds per leer for the 100XR

@PointShiftDrive

Жыл бұрын

Yeah but dynamic weight is what matters most of the time. 600lbs is basically 2-3 people and the full weight of the tent, rack, railings etc. that’s doable. But when the top weight is moving, you want to make sure it isn’t too heavy and snaps right off around a corner

I have a 2019 Trd OR. I’ve had the diamondback bed cover on it for 9 months. We just got a German Shepherd puppy that may get up to 100lbs quick. Right now he can fit in between my kids in the back seat but I’m looking at getting a shell.

@PointShiftDrive

4 жыл бұрын

You won’t regret a shell if you have big dogs. Two words, “dog hair!”

@MrSeafoo

4 жыл бұрын

@@PointShiftDrive I like your rack setup too. I have a Thule cargo box that I could put up there. Would free up a bunch more room. I

Who apologizes for a dirty truck??? 😄

Get one of those phone thing’s you put on the back of your phone to hold it with your fingers. Stick it on your sliding window to be your knob

@PointShiftDrive

Жыл бұрын

Good suggestion! I actually ended up using a GoPro mount instead

Does anyone make a shell that fits? They all seem to overhang on the back corners. Bugs me. Its why i havent bought a shell.

You could probably a 3M hook or knob on the sliding window

@PointShiftDrive

4 жыл бұрын

Not a bad idea... Wonder how that would hold up in the elements. Ill give that a try! Thanks

@Darkxius

4 жыл бұрын

Point.Shift.Drive only one way to find out lol! Keep up the cool videos!

@briananderson6758

3 жыл бұрын

Or small souction cup

@PointShiftDrive

3 жыл бұрын

@@briananderson6758 I ended up using a gopro stick um mount. works perfectly and doesnt stick out.

Also are you able to take off the bed shell

@PointShiftDrive

4 жыл бұрын

Yes. the shell is basically held down with clamps. However there should be sealant in between the bed and the shell if its done properly. its easily added or removed if need be.

@benjaminblount2691

4 жыл бұрын

Point.Shift.Drive thanks for the info post more vids about it pls

OK. I'm a little confused. I thought this was a video about the bed cap? Not as in depth as I assumed it would be.

@PointShiftDrive

Ай бұрын

Happy to speak to whatever info you were looking for and didn’t see. What questions do you have?

😍😍😍😍😍😍😍😍😍😍🤩😍😍😍💪💪💪

How much did this xr100 cost u?

@PointShiftDrive

3 жыл бұрын

New they run about $2200

I'm getting a SnugTop shell for my Tacoma long-bed. I'll be sleeping in it on road-trips. No need for tents or hotels!

@PointShiftDrive

4 жыл бұрын

Thats the best! I love having a hotel room built into my rig. No reliance on anyone!

@JERRYR708

3 жыл бұрын

@@PointShiftDrive I slept in the back of my truck for years. I worked long hours as a pipe fitter on the islands and too tired to make the long commute home. I essentially went camping, fishing and had tailgate parties while relaxing instead of getting high blood pressure in traffic for hours. I kinda miss that part of my life.

@PointShiftDrive

3 жыл бұрын

@@JERRYR708 Thats fantastic! I completely understand that feeling and freedom you experienced. I hate traffic more than just about anything... to have a relaxing way around it is key! thanks for sharing

I think toppers look better on long beds.

How much are they?

@PointShiftDrive

2 жыл бұрын

I bought mine for $2300

How much did that shell run you?

@PointShiftDrive

3 жыл бұрын

These run about $2200 installed.

@dangerdanadv1445

3 жыл бұрын

@@PointShiftDrive thx fam, appreciate the helpful reply. It's super annoying that Leer doesn't put general prices on their site.

@PointShiftDrive

3 жыл бұрын

@@dangerdanadv1445 I agree. I think it’s because they allow their resellers to price it as they want.

@dangerdanadv1445

3 жыл бұрын

@@PointShiftDrive probably true, but none of their resellers would reply to me when I requested a quote lol. Yet somehow a KZread commenter was able to do their job...

Damn that's a good looking truck! Why did you ruin it with that silly ass snorkel?

@PointShiftDrive

4 жыл бұрын

R. S. I don’t love the look of the snorkel but I like the functionality.

Super pacific vs this?

@PointShiftDrive

3 жыл бұрын

I think that depends on what you use your truck for. the Leer is much more usable for everyday stuff... for example, you can really use the roof racks for bikes, luggage, tents, lumber. the SP has a less usable rack system, just not as strong IMO. however, if you are using your truck for camping/overlanding/or bugout, nothing beats having a bed with you no matter where you are.

What year taco is this?

@PointShiftDrive

2 жыл бұрын

It’s a 2017 TRD Pro

@lennylee6528

2 жыл бұрын

I have a 17 off road would this fit 5 ft bed?

@lennylee6528

2 жыл бұрын

I heard it’s hard to find a shell for these because they leak?

@PointShiftDrive

2 жыл бұрын

@@lennylee6528 shells are custom designed for your truck. They should fit pretty perfect. If you want them to not leak you just need to make sure they use a good rubber seal and Silicone when installing. Mine never leaked unless I pressure washed it shooting water up ward into the seal. Rains never caused it to leak though.

Keep a suction cup in your pocket.

@PointShiftDrive

3 жыл бұрын

I ended up sticking a GoPro mount on the corner of the window. Works great!

Glue a knob on

@PointShiftDrive

3 жыл бұрын

to what?

My $100 junkyard find aluminum cap does has just about all the same features (manual lock only) and has a top rack. Paying ten plus times more to me just isn't worth it at all.

@PointShiftDrive

4 жыл бұрын

Peeon the3rdrail good find! However someone needs to buy it new for you to find it in a junkyard. ;)

@arreola961

3 жыл бұрын

You lucky guy! It took me 10 months to find a fender that matched my 4runner