Hello Javi ! What you think is the best refox FM-50 or oled 2022 ? It seems like oled2022 is a heavy duty machine as pose to refox FM-50 . But the refox has the bubble removal . Thanks for the answer

do you know the OM K6 Edge pro? what do you know about that machine?

Thank you for replying to my email, I appreciated the help

Nice video but won't the universal laminating mold work in your old ymj laminating machine?

@MrPhoneDoctor

3 жыл бұрын

Yes

Hey Javi how do these machines bring the cables in to the vacuum chamber for the heater. Do they have specialised hermetic plugs?

@MrPhoneDoctor

2 жыл бұрын

Hi Justin they use special heating rods similar to these here. YXQ AC 110V 600W Cartridge Heater 10x 300mm Power Single Tube Mould Heating Tool 2Pcs www.amazon.com/dp/B06XW6MMKH/ref=cm_sw_r_apan_glt_fabc_EHKGG8P23CVC4K3SDS2G?_encoding=UTF8&psc=1

@justinneumann1492

2 жыл бұрын

@@MrPhoneDoctor how do the cables enter the laminating chamber? They must be sealed somehow to avoid losing vacuum? I'm going to have to look at building my own machine as shipping costs nearly as much as the machine itself which I can't justify

@BenFreemanDC

2 жыл бұрын

@@justinneumann1492 cost of doing business. The machine can be $1200 and free shipping or machine costs $600 and shipping costs $600. Six of one half dozen of the other.

Hello, i am going to buying an YMJ machine. Do you have no little waves after glass replacement with this machine?

@MrPhoneDoctor

3 жыл бұрын

Sometimes yes. We are not perfect.

Hey Javi how much did this machine cost you ? And is this machine necessary or could you just apply the glass with oca pre applied to the OLED and then put it in a debubbler like the Uyue X9s ? From what I've read this machine is only necessary for curved screens right ?

@MrPhoneDoctor

2 жыл бұрын

We use it for everything. It cost about 2400 with vacuum plus shipping and all. I'm not familiar with uyue.

Hello can you tell me what settings you use on ymj for iPhone X?

@MrPhoneDoctor

2 жыл бұрын

Hello it varies on what process we are doing

@MsCxxxxx

2 жыл бұрын

@@MrPhoneDoctor Right yeah sorry didn’t give you much information to begin with 😅 I mean for oled to glass. I have found some which are all pretty close to each other. But I’m not quite sure why and what the differences are. I’m using ymj th 50 These are the settings I’ve found 30 25 25 30psi Or 45 25 30 35psi Or 45 27 20 30psi Or 50 30 18 32psi For example do a couple of degree Celsius really have that big of an impact or the Temperature in general. Why is there even one? I don’t wanna get to technical i don’t really care how exactly the machine works. Just want to understand how I can fully master it. Or do I have to truly understand the machine in a mechanical way in order to extract the best possible result ? My vacuum isnt dropping what could be the problem any ideas? machine works, enough oil but it doesnt go below 4,5... if i press against the door really hard it'll start to go down but its very cumbersome Would really appreciate any help. I’m just getting started here in Germany with refurbishing and your videos helped me a lot. Really grateful for all the information you shared 🙏

Mr Phone Doctor!! I have a question. I am contemplating what to buy for ceo-1+ and ceo-2+. Please give me a good opinion

@zverdisplay7260

3 жыл бұрын

Ymj 13 is far superior. Forward will break in the first(or second) year of using. I will never buy Forward after rmb-2, rmb 3+ and ceo 2+. All of them have shortcomings.

@kenbrake2828

3 жыл бұрын

@@zverdisplay7260 I was planning on getting rmb 3+. So I should get YMJ instead?

@amigo15dk60

3 жыл бұрын

@@kenbrake2828 me too bro. What should we buy?

@MrPhoneDoctor

3 жыл бұрын

If you can afford the ymj run with that. I'd recommend larger one so can do ipads in future.

Hey Javi just a question where do you get info about the settings? Like what pressure to use with each mold? Love the vids much love!

@MrPhoneDoctor

3 жыл бұрын

My vendor gave it to me. Did you try to ask them?

@ne14lov22002

3 жыл бұрын

@@MrPhoneDoctor Hello, I hope is well with you.. Where did you buy your OLED 2020 Phone LCD/OLED Laminator ?

@danielhoofddorp

Жыл бұрын

Hey! I bought all the stuff. The laminator, forward, uv cure, all. But where do you get the glass with oca? I live in the Netherlands and I am starting the business. There is a lot on Aliexpress, but maybe you have a trustable supplier for me. You also inspired me to just do it. I have been waiting for 6 years. Ik hope for an answer 😎

@MrPhoneDoctor

Жыл бұрын

Welcome to the refurb club! Join my discord. We offer 2-1 Samsung glass you can reach me inside the discord

@ridu9976

10 ай бұрын

@@danielhoofddorphi how did you pay when you bought it? I went to the website and message the phone number and the sell says that hi sells them directly because of the high taxes in Vietnam? What is the price ? Now they have 2023 versions for 1980 dollars plus shipping 800 dollars to Europe

Any thoughts on REWA laminator?

@MrPhoneDoctor

3 жыл бұрын

Rewa makes great machines. Don't think there will be much difference:)

Have a question on your experience what laminating machine is better OLED 2020 or ymj 13. ? And does OLED 2020 leaves any wrinkles on lcds when laminated

@emiliolinarez5734

3 жыл бұрын

I’m buying one machine I have to make a sedición

@emiliolinarez5734

3 жыл бұрын

So that’s why I’m asking the expert. I heard Vietnam machines and glasses are the best quality

@MrPhoneDoctor

3 жыл бұрын

Go with ymj 13 if going to laminate larger iPads. Oled 2020 for iPads and all under 10". If you can wait till August new oled 2022 comes out. Larger like ymj 13

@emiliolinarez5734

3 жыл бұрын

How is the laminating on the OLED 2020 with the universal laminating pad no wrinkles

@emiliolinarez5734

3 жыл бұрын

And by the way I really appreciate your help your the best on the business

Where to buy the machine? And nice video btw

@MrPhoneDoctor

3 жыл бұрын

oledmobile.vn

Which is oca machine is best ymj r

@MrPhoneDoctor

3 жыл бұрын

The best machine is the one you learn to use properly:)

Which is best laser machine

@BuddhaPinneberg

3 жыл бұрын

Use .... 20 w Laser maybe you can also engrave. Look about the shipment costs there ist a huge difference. Union repair or Vipprogrammer.com or rewa group M-TRIANGEL MI ONE LASER

@MrPhoneDoctor

3 жыл бұрын

I enjoy mt

You should to measure diameter of pistons. This is a lot tell about power of machine.

Brother where you at? I want to visit you and talk a little bit

@MrPhoneDoctor

3 жыл бұрын

Las cruces NM

Only ymj