Hi! I love your tutorials, thank you so much! Just a quick question on this one. When you say you want the needle hole to be in line with the foot, what position is the gun in at that time? Thanks!

Thank you for this great detailed tutorial! We followed your instructions and now my gun works well! Thank you!!!

@Tuftinglove

3 жыл бұрын

That's great to hear - happy tufting! :-)

FINALLY AT LEAST ONE OTHER VIDEO

@Tuftinglove

3 жыл бұрын

...and many more to come! :)

When I try to shorten the pile height which requires shortening the gear screw (the long one attached to the gear) which then causes the tab that goes under the sensor tabs to bump up against the back of the gun. I need to see a video of shortening the pile not just lengthening the pile please.

hi, thanks for the tutorial, I have an issue, the thing is that modifing the length I think that I swept the first screw, the one that allows to move the pusher, it works well though, but i am a bit worried if it can make problems

@Tuftinglove

2 жыл бұрын

As long as the pusher stays in place when you push/pull, I don't think it's a problem.

Thanks for the nice explanation I have been searching for a while how to get this machine because it is not available in my country. Can you send it to Syria and how much does it cost and the shipping fees?

@Tuftinglove

2 жыл бұрын

Hey, we just checked and unfortunately none of our shipping partners offer shipping to syria. Sorry

👏👏👏👏

Do you know what sizes those Alan wrenches are? I bought my gun second hand and didn’t get the tools that came with

@Tuftinglove

3 жыл бұрын

Hey Alissah, sorry for the late response. We somehow missed your comment. The wrenches have the following sizes: 3.9 mm big 3 mm middle 2.38 mm small The distance between two parallel sides. We will bring them as spareparts to the shop next week. Have a great weekend Jenni

Where can i buy replacement scissors for this gun? I know that the ones for the other style of tufting gun are a different length and can’t seem to find the right ones...!

@Tuftinglove

3 жыл бұрын

With our guns, there is always a replacement scissor if you purchase it. I guess you don't have the gun from us, since we are only expecting the first batch to arrive. But we can check if these fit anyway. You can send me an email to help@tuftinglove.com with a picture of your scissors incl. measurements so we can make sure you buy a suitable replacement.

@Tuftinglove

3 жыл бұрын

Shoot me an email to help@tuftinglove.com and i'll figure it out with with our supplier. Let me know what tufting gun you have. I'm sure we can find it :)

@Tuftinglove

3 жыл бұрын

The Spareparts are in the shop now

Can you explain how I assemble the white gear back in place. Yarn got stuck so I got it out but the screw on what attaches to the white gear became loose I made a mistake and unloosed it not knowing and it fell off now I can’t attach it back in place

@Tuftinglove

2 жыл бұрын

The T-shaped nut goes on top of the white gear, then the square plate underneath the white gear before the bearing. The screw comes comes last to tighten everything back in place.

@flywithsky3398

2 жыл бұрын

Can you reply to my email I sent you because I’m still confused. I tried that but it’s not staying 😭 it’s like I’m missing something but I know I’m not

@Tuftinglove

2 жыл бұрын

@@flywithsky3398 we can't find an email from you. You might wanna resend it so, we can solve it together. Jenni

Hi! I just try to do the same as you but a can't put in completely and cannot put the first screw you took out! It turns and turns but doesn't seem to enter! :'(

@Tuftinglove

2 жыл бұрын

You might have unscrewed it too much, so the counterpart is not in place anymore. check the tutorial on how to change the scissors. it sits beneath the scissors.

I don't know what happened but I just try to loosen the first black screw and now it doesn't tighten back and I cannot use my tufting gun because it always falls of

@Tuftinglove

2 жыл бұрын

You probably loosend it too much and lost the counterpart. You can check out our: How the exchange the scissors tutorial, to reach it. The counterpart is located underneath the scissors

I accidentally pulled out my pusher and don’t know how to tighten it, can you help?

@Tuftinglove

2 жыл бұрын

Hey Georgina, You can follow this tutorial here: kzread.info/dash/bejne/ZqyIyNuHnrawqLg.html the counterpart of the pusher is placed below the scissors, so if you ''exchange'' the scissors like shown in the tutorial i linked you you can access it, tighten the pusher back in and bring everything back together. best Jenni

Hello! I need Help. The pussher of My tufting doesnt stay in. Ive try so many time but it doesnt work. Help me please

@Tuftinglove

3 жыл бұрын

Hey Olenka, can you send me an email to help@tuftinglove.com with pictures/video that is showing the problem? I'm sure we can fix it together :) Jenni

@beenaforever7260

2 ай бұрын

I know this is a long shot but did you ever get this resolved

Huh, on the video for that same gun, on the companies official website, they adjust the top one. 🤔

@Tuftinglove

2 жыл бұрын

There are different options of how to do it, we will release a video for the AK-I soon. We just find the top version pretty complicated and there are so many options for errors.

@shannonbroughton5620

2 жыл бұрын

Which company website are you referring to? I need to see a different version as this doesn’t explain making the pile shorter

And it says NEVER ADJUST THE BOTTOM ONE?

@Tuftinglove

2 жыл бұрын

As i said in the previous comment. it's two different approaches. Also this is a tutorial on an NK1 not an AK-I what might look the same, but is a bit different in handling. Our new AK-I pile height tutorial is coming soon.

How much pls

@Tuftinglove

2 жыл бұрын

You can find all our products here: www.tuftinglove.com/Cut-Pile-AK-I-Tufting-Machine/ART1080