whos watching at 2020?

@hollowshi3944

4 жыл бұрын

Me

Don't forget to lube the rubber gasket on the new filter with a little bit of new oil.

dude ur a life saver thnx

why take off the fairings?

The oil doesn't have to be HOT when you change it. Usually I let it sit for 20-30 minutes after a good run, then you can pull the bolt out of the way...you'll get a little oil on your hands (wear a nitrile glove if you must) so just need a rag nearby, but it's not scalding at that point.

I use Castrol ACT-EVO X-TRA 4T Engine Oil 10W-40, but that is just me.

Same for a 96 katana 600?

i have the same bike and love your screen where did you get it?

The drain bolt is on the bottom you can take the oil filter off through the front no need to take any fairings off just the cover where you put the oil in its a 20 min job if you have the tools

great vid dude. I'm going to try and change the oil on my 2006 Kat this weekend. do you suggest a brand of oil. I've heard motul is good but im so new they all look and sound the same to me. thanks!

@loboxido 20-50 should be fine. The numbers are the viscosity (thickness) of the oil. The lower the number, the thinner (more runny) it is. When the oil is cold, it will be be towards the higher number, and when it is hot, it will be the smaller number. Though 20w-50 will work i run 10w-40 (the recommended)

same here. I'm planning on doing it this weekend. how did you'rs turn out man? i have a 2006 Kat 600 and this will be my first time. any suggestions on the oil you're using? cheers

Anyone knows what kind of socket it uses for the oil drain and other parts of this bike? I used to have another brand of MC and my shit doesn't fit it. Need to buy a few tools now.

He says his filter has a little "nub" on it--for a socket... It can be called a mounting surface..Or a NUT that was welded on top of the filter for ease of removal!!!

yo men, i want to change the oil i'm a noob, i bought a 20w-50, doesn't matter if i use that grade? great vid btw i have a katana too :)

How much litres you put inside???

Great way to damage torque wrench

Liters???please

you sound like you try to live lide perfect 😂

@V8POWER01 i appreciate that dude :D it makes me more comfortable with my choice be cool ;)

Is that from Oliver and company lol

reading the comments some of you should probably not be riding and DEFINITELY not change n yer own oil. take it in let the pros do it or find Great Dogdad vid for real deal.

holy shit 32,000 views unbelievable.

You just rinsed the oil down the drain. torque wrench shit💪heres mine. wheres the oil change portion of the vid. I think.... oh shit more singing. are you Aaron Lewis er sumthin. drain oil check. gotta shit be right bak

Dude is doing too much, taking off the fairings for an oil change, using the torque wrench to try and unscrew the bolt...smh horrible video

@OLDSCHOOL6239 Hey this is still VixenHunter00 I just have another account, umm the carbs are located just behind the air box. When you take the seat off you can see the big round hole under the tank, that is the air box, so when you take the tank off follow the air box and the carbs are connected to the back. Should be four round connections. If you have any questions about Katana or bike maintenance in general, I use a website called Katriders. They have a really cool and helpful community.

@Castonia07 Yes, yes it is..lol

@shaqdaddy11 he this is Vixenhunter00 just on my other account. What do you mean by attachment? If you mean the socket number it is a 21mm. I have two tourgue wrenches though because you are not suppost to use them to take off nuts because over time it will wreck the wrench, but if you only do it this one time it would be ok.