Please subscribe to help me reach 1000 subscribers. Thank you!

@Zombie101

Жыл бұрын

subbed

@Renegade_Rabryn

Жыл бұрын

@@Zombie101 🙏

@Zombie101

Жыл бұрын

@@Renegade_Rabryn I actually liked the first person perspective that you filmed it in, like it wasn't trying to be all flashy and show sexy angles, it was useful cause it was like we were viewing it for ourselves at all its angles whilst covering off the practicalities, keep up the good work mate

@FreedomGamingFG

Жыл бұрын

5:25 A youtuber named Linus Tech Tips did a live stream of fixing pc and at the end he explains why it would be better to make the top intake instead of exhaust. (I'm not saying your wrong I'm just saying you can possibly find better cooling if you make the top intake as well.)

The reason there's a dust filter at the top is because, when the PC is turned off, and the radiator fans are not blowing air out, dust will fall on the filter protecting the radiator fans ;)

@burdmate

10 ай бұрын

Not the reason at all. They'll get way more dust when moving dusty air that made it through the front intake.

@albatross580

3 ай бұрын

Not really. Dust build up will just get blow off the top fans when the pc is turned on.

@Le_Sourpuss

3 ай бұрын

@@albatross580 Not the one that fell through the fans into the top of the GPU, etc.

@albatross580

3 ай бұрын

@@Le_Sourpuss you’re gonna get dust buildup on top of the gpu regardless. I have an NZXT H7 Flow with fine filters in a super clean gaming room, and the top of the gpu still gets covered in a fine layer of dust. There’s really no way to stop dust from entering the case, no matter how clean the room is.

@Le_Sourpuss

3 ай бұрын

@@albatross580 That's true. However why make it even easier for the dust to get there? ;)

Here's a tip. Run a good air purifier in the same room as your pc. I opened my pc the other day after a few years. I closed it right back up. It didn't need to be cleaned at all. Not to mention better air for you to breathe.

amazing video, helped me a lot - The music is little bit too sentimental but in general brilliant job!

Thank you, your video really helped me to decide. I'll go with H5, because I'm looking for a smaller tower with great air flow.

Much needed review, hopefully your channel grows rapidly!

I like the comparison, really clear, it helps a lot!

Thanks for the detailed comparison!

the very best review, thanks!. I already have the NZXT H5 Elite. Looking for the H7 Elite for a home server

With rhe smaller H5, can the top aio radiator mount block the tall ram ?

Super appreciate the comparisons bro!!

@Renegade_Rabryn

Жыл бұрын

Appreciate you watching and commenting!

is the lower 120 intake on the h5 a pwm fan?

The H7 front fan bracket is removable via 2 screws in the top on the outside front of the case.

@Limburg92

19 күн бұрын

I noticed this right after finishing cable management and was like well great to know afterwards😂

Wow.. all day today, i've been thinking about getting the h5 flow or h7 flow. thanks for the info

@Renegade_Rabryn

Жыл бұрын

both are awesome, id personally get the h7 for the extra room

thanks for the comparison man!

@Renegade_Rabryn

10 ай бұрын

Thanks for watching!

You can but also the front out for the radiators on the H7

Would you say that the NZXT ones are currently a little bit higher quality than the Corsair 4/5000Ds, considering the vented PSU metal is sagging on the corsair?

@Renegade_Rabryn

7 ай бұрын

I would say they're about the same quality. I prefer the design of the nzxts over the corsairs

You should setup the camera fixed instead moving it around like that. Btw, thank you for the information and +1 sub.

Hi I would like to ask that the H5 at the top can it hold a 240mm radiator or no?

@Renegade_Rabryn

8 ай бұрын

Yes

WTF is up with the sad background music XD

@mojavecourier6987

14 күн бұрын

Yeah it's like sad creepy Silent Hill music lol

Thinking captive thumb screws are cheaper than pressure fittings?

I believe the top filter on the H7 is to keep things 'dust free' if you mount intake fans blowing cool air straight down onto your hardware and then blow the air out thru a front mounted radiator and out the rather porous front panel. Current contemporary case designs pull in air from the front , pushing thru a radiator and sending all that hot air into the case and all over the hardware you're trying to cool. Kind of defeating the purpose. The H7 design looks like it would be much more efficient, only cold air in, and only hot air out, assuming I'm right about the reason for the top filter.

Bruh insta subscribe because this was exactly the video i was looking for Thx!

I have a 4000d airflow but if not I’d def get an h5 since I am only have a 240mm rad.

The main gripe with the larger H7 is the 50% heavier weight. Carrying it around, if you travel often, college, etc, is an added hassle.

@JamieReynolds89

8 ай бұрын

wtf lol

@RubbingPotatoes

8 ай бұрын

@@JamieReynolds89 The larger case is heavier, so it's a bigger hassle to move around and stuff if you travel. Does that make sense? Do you understand the words coming out of my mouth?

@el_teodoro

7 ай бұрын

@@RubbingPotatoes If traveling is your concern. Consider buying a laptop instead Lol Edit: Or go the gym and that 50% more weight will feel like nothing :D

@RubbingPotatoes

7 ай бұрын

@@el_teodoro I have a laptop but it's too powered down for my taste. I'm talking travel like seasonal for a student that goes to university, etc.

@majsterV

6 ай бұрын

​@@RubbingPotatoes Cases like this, that are not meant to move, i much prefer quality build over weight. Heavier often mean better structural stiffness, less wobbly thicker plates and metal in general. H5 use very thin cheap feeling metal chasis. Of all well known manufacturers from what i can see, NZXT is one of those that use very cheap metal in their midle tier chasis. Not that others are significally better, but they are. Their cases look good in shoots and design is top tier eye pleasing, but when you inspect in person, is clear material quality is poor.

i dont know nothing about computers but my bf likes it so im watching it with him!!! great video very nice, they look pretty!

I only needed the first 5 mins or so of this video to see how large they are but ended up watching the whole thing it was kinda therapeutic with the music going on in the back

@Renegade_Rabryn

Жыл бұрын

Glad you liked it

@ahmadaimam

Жыл бұрын

@@Renegade_Rabryn ended up ordering the H5 Flow about 1 minute ago haha thanks for your help

Why is the h7 flow glass side not printed? I wanted to buy h7 flow, but then i saw that its tinted so I don’t really want to buy it. SO HOW???

Wow i need to see the vid of how u put a 280mm radiator cuz the 240mm scare me for my ryzen 7 5800x3D and rx 6800 xt

I have an h5flow and im getting an rx 7800 xt and idk if i should switch for the h7flow for lower temps of the cpu

@CargoShorts7

3 ай бұрын

What did you end up doing?

just to clarify the exact specs on what fans/rads you can fit in the h7 front: 3 140mm fans (pretty rare I think), or 360mm rad top: 3 120mm fans, or 360mm rad rear: 1 140mm fan (also pretty uncommon) having the 3 140mms in the front and 1 in the rear can significantly increase cooling performance/dB ratio, which is what sold me on the case over others personally.

@MolleonOSRS

9 ай бұрын

Would you run the top fans as exhaust and front+back as intake?

@Pecch

9 ай бұрын

@@MolleonOSRS front as intake, back and top as exhuast

@MolleonOSRS

9 ай бұрын

@@Pecch so 3 intake and 4 exhaust?

@MolleonOSRS

9 ай бұрын

Ah, the front is 140mm. That’s a good configuration :)

@Pecch

9 ай бұрын

@@MolleonOSRS yes, the fact the intake fans are larger, and also that my top exhaust has to go through a radiator, i believe makes for a decent positive pressure system

Wish the H7 came with 3 fans in the front. A fan hub/controller would be nice.

You forgot to compare the size between them =( I just got a H7 and got surprised how big it is.. i'm thinking about switching to an H5, but i can't find a size comparisson

@Renegade_Rabryn

Жыл бұрын

H7 Flow HxWxD: 505mm x 230mm x 480mm/19.9” x 9.1” x 18.9” H5 Flow HxWxD: 464mm x 227mm x 446mm/18.3” x 8.9” x 17.6” The H5 flow is: 41mm or 1.6” shorter in height and its 34mm or 1.3” shorter in length

Good luck getting 1000 subscribers. subscribed.

@Renegade_Rabryn

10 ай бұрын

Thank you very much!

Hello by any chance do you know if this case will support rx 7900 xt red Devil, I currently have Nzxt H510B case and my new GPU did not support it I was wondering if the H7 will be great

@Renegade_Rabryn

Жыл бұрын

H7 supports up to 400mm gpu length. Your red devil is 338 so yes

@mroutkast3695

Жыл бұрын

@@Renegade_Rabryn thank you for replying it won’t be vertical mounting right because I also don’t like when the gpu is vertical

I just learned that there are RGB versions of these cases!

very helpful video

perfect video. more one subscribe

Why in Amazon they say h5 taller than h7 ?

H5 H7 H9 nzxt made the best case

I wish NZXT didn't tint the side window. I prefer the clear windows.

Does the H5 have a front dust filter?

@yannou4361

4 ай бұрын

Yes

Good case

H7 hands down is the best 👍

After I watch your video I become dizzy.......

H7 without a doubt is the better case

@Renegade_Rabryn

Жыл бұрын

I agree

Heat rises so if you had intake fans at the top they would be fighting physics. Still could be beneficial regardless.

@burdmate

10 ай бұрын

What you're referring to is natural convection, which is meaningless in an actively cooled box. So easy to overcome it's not even a fight.

U need a better camera filming but the vid is good

great video

BRO THX. But you need a friend to hold a camera for you

dude your breathing is giving me a hard time, nice review tho 👏

whats w the sad music lol

@6:30:sucking cold air from the outside through your radiator into the case? That makes absolutely no sense. The purpose of an AIO is to move hot air from the CPU block to the radiator and exhaust it outside of the case, not suck it back in so you heat up your case even more. I guess if your fit 3 140mm fans at the front running at 2400rpm and flip the rear fan at the back so in becomes an intake fan it might work. You would go deaf from the fan noise. No one does this and this case isn't set up to work that way.

sub+ :)))

@Renegade_Rabryn

Жыл бұрын

Thanks!

These cases are sh*t..better to go for other brands..

H5 looks better in every department. Even the screws i like cause it gives a more secure closure. I don't get why you prefer it without them. If it is closed with magnets chances are that in some years the magnets might go wrong while with screws you are always safe.

@DavidMasson90

Жыл бұрын

There are no magnets. They are little balls that clip and unclip into little sockets

@Renegade_Rabryn

Жыл бұрын

The panels don't have magnets. They have clips.

@anna45333

Жыл бұрын

@@Renegade_Rabryn Ah. well clips may still malfunction at some point. A screw is for ever. It is strange that H5 looks to have also clips+screws. While the other seems to have only clips. That is strange. Anyway it is still a very nice case the H7. I just prefer the h5 myself

@heroicsquirrel3195

11 ай бұрын

H7 is better, those screws look like trash and are more effort to use, also screws lose thread over time