Got Questions? Business Inquiries? Suggestions? Contact me via email: Eagle.Eye.Shoot3r@gmail.com Or Check out my site DPGunworks.com
Жүктеу.....
Пікірлер: 95
@lindsaybrown247023 күн бұрын
I must say Kenny once again you have amazed me. If there are any doubters on Kenny’s work, you will not be for long. I have purchased several rifles from Kenny and he has over delivered every time. As for Rim fire rifles, I have all 3, my first being an CZ457, Voodoo and RimX. Kenny built my Voodoo and it trust me when I say it shoots better than I ever could shoot. I shot so well I had Kenny build me a bolt action 6ARC and a 6 Creedmoor and I have to say they both shoot lights out. Kenny if you start doing upgrades to RimX bolts, I will ship mines out to you ASAP. Keep up the great work and thank you for making us sub par shooters look like pros!
@CyclopsJoeVideos24 күн бұрын
That KICKS ASSSSSS !!!! Now to start saving for a RimX SS Benchrest Rifle !!!!!!!
@EagleEyeShooting
23 күн бұрын
Thanks for the YT post my brother! Hey give me a call. Got some things in the works and think you might like
@CopperStarPrecision24 күн бұрын
So you're telling me that you can now get a RimX with CZ reliability... Absolute game changer!
@EagleEyeShooting
24 күн бұрын
Yes! I finally got my custom CZ457 extractors in. I've been running this upgrade on my personal Rim-X for 8 months this lol
@larryhardside7636
24 күн бұрын
forgive me if im wrong, but this sounds like sarcasm to me. Why spend the money on a rimx and then extra to do the work when you can just get a CZ or vudoo and save money?
@CopperStarPrecision
24 күн бұрын
@@larryhardside7636 Kenny built my CZ which is what I run in competition and it's exceptional. While I am a CZ fanboy there are merits to the RimX. RimX and Vudoo are Remington 700 clones which means a much wider variety of stocks/chassis/triggers than for the CZ. It also makes it easier to build a true trainer for a centerfire rifle with the same footprint. The downside to the Vudoo is the magazine which suffers from rimlock. Every match I've ever competed in has had a mag fail to load a round from people shooting Vudoo rifles. The RimX mags are better, but there is the problem of broken extractors. This solves that issue and moves the industry forward.
@EagleEyeShooting
23 күн бұрын
@@CopperStarPrecision perfectly said. Moving this industry forward. 👏
@rayphillips543624 күн бұрын
Constant innovation and improvement is what sets you apart in my opinion Kenny……. The orange Tennessee CZ you built is still shooting crazy accurate. Take care and I’ll be in touch at some point about a 2500x
@misterlewgee88745 күн бұрын
Very effen interesting. Looks like a real win. Good on you.... Well done..
@conservativesniperhunter743924 күн бұрын
Another brilliant idea that has been solved by the skilled Eagle Eye. Hornady still hasn’t thanked or acknowledged Kenny for solving a couple of their problems with certain cartridges yet.
@user-jk3jw3pw4n23 күн бұрын
I like a guy that is aware of improvement can always be made! Great Job Kenny!
@jz608513 күн бұрын
Kenny, let me know when to send in my Rim-X you built for the bolt upgrade. Awesome idea!
@williamgittins477024 күн бұрын
So you can make my already incredible DPG RimX even better , I’m in!!!
@EagleEyeShooting
24 күн бұрын
Lol thanks brother and yes. Will be offered for only our builds exclusive
@kubikariYOU24 күн бұрын
Wow, good job, well done!
@fairviewprecision24 күн бұрын
Okay, now I have to absolutly have one!!! AWESOME smithing man!!!
@davepickering182524 күн бұрын
Nice work Kenny! What a great mod and looks like those extractors will also solve the problems we were having with the CZ extractors. 😀
@allenclayton724 күн бұрын
Where have you been? Missing your videos
@EagleEyeShooting
24 күн бұрын
Building rifles! Lol slaving away. I got a lot of things to catch up on and exciting new products I have coming out
@TODinWY24 күн бұрын
Good job, Kenny! S-7 is a good choice.
@westcovinadodge24 күн бұрын
Great to see Kenny.
@conservativesniperhunter743924 күн бұрын
G’day Kenny, good to see and hear from you. We hope that your gunsmithing business is going gangbusters.
@T.A.B.Videos24 күн бұрын
That is a sweet rifle
@FishingBenB24 күн бұрын
This is huge!!!
@hesa365624 күн бұрын
Congratulations! 👍🇺🇲
@keithlshepherd273824 күн бұрын
Dang man you know your business always thinking to make things better can’t wait to get the hm2 from you guess I’m going to have to get a rim x now
@EagleEyeShooting
24 күн бұрын
Actually plan on working on that sooner. I'll be in touch!
@CRBW24 күн бұрын
Way to knock it out of the park my friend!
@EagleEyeShooting
24 күн бұрын
Thanks Anthony! Hey did you find a 25 cal barrel?
@jeffhuntley292124 күн бұрын
Very cool! Hope you and the family are doing well!
@EagleEyeShooting
24 күн бұрын
I'm alive and doing well. Just super busy
@gavinbowman823423 күн бұрын
Need this!
@williamkaliden2822 күн бұрын
I’m on the list for a RimX build from Kenny. I cannot wait to get the rifle for next year’s PRS season.
@user-fn8lu1yj9k23 күн бұрын
Hmm. That little problem is exactly why I’ve never bought a RimX or Voodoo Never seen one not jam during a match while my CZ 457 runs like butter. Knew someone would figure something out. Good work
@EagleEyeShooting
23 күн бұрын
I'm with you. After running all 3 platforms. I can say the CZ457 has been the most reliable and has got me more podium finishes at local matches
@williamleonard899821 күн бұрын
Would be nice to see a video of rifle with new bolt and barrel mods shooting (down range results), and then install original rim x bolt with modified barrel and shoot again?
@EagleEyeShooting
21 күн бұрын
I could do that 👍
@williamleonard8998
21 күн бұрын
@@EagleEyeShooting very interested. I have a build in the que
@EagleEyeShooting
21 күн бұрын
Much appreciate the opportunity brother. This mod will be available for our clients first
@user-ym7bj4ys4k19 күн бұрын
Do you have to do anything to the barrel to have a place for the extractor
@unclejim233023 күн бұрын
Nice. 👍
@John-uo1qf24 күн бұрын
I've put 10,000+ rounds through my Vudoo 360 with very few feed issues. If you load the magazines with as much care as Kenny builds his rifles you won't have issues.
@EagleEyeShooting
24 күн бұрын
Lmao. You don't run the gun hard enough like some of us then. But yeah.... I'd take a Rim-X over a V22 any day.
@John-uo1qf
24 күн бұрын
@@EagleEyeShooting Living in America it's nice to still have choices. I'm working on running my bolt faster but in the meantime am enjoying my division wins in NRL22 competitions!
@blaiz424 күн бұрын
im going to have them build me a gun like this
@conservativesniperhunter743924 күн бұрын
I would patent it ASAP.
@snakeman4823 күн бұрын
You built my RimX rifle back when you started doing them. So I would like to get this mod done to my bolt when it's available.
@EagleEyeShooting
23 күн бұрын
Definitely will be available for my clients exclusively
@michaelcoley936023 күн бұрын
In my next life I hope that I’m part Asian lol. Kenny is one smart cookie
@EagleEyeShooting
23 күн бұрын
Lol... I barely qualify as asian. Filipino's are the Spanish white rice eaters
@michaelcoley9360
23 күн бұрын
@@EagleEyeShooting I guess I’ll start eating more rice 🍚
@lilsnoop603524 күн бұрын
Hey Kenny, love my rifle that you built. Can I get the modification head for my existing bolt? Thanks
@EagleEyeShooting
24 күн бұрын
Absolutely, this will be exclusive to our builds only. I'll send a email campaign when I have my batch of extractors ready
@SameerKhan-gm4ny22 күн бұрын
Need more explanation about magazine. Because i have mag problem
@tattoo862024 күн бұрын
Link pls . Wanna buy it🎉
@allenclayton724 күн бұрын
I think MCR just came out with the same thing
@EagleEyeShooting
24 күн бұрын
Uses Vudoo extractors which arnt as reliable for this upgrade....while great minds think alike, I had this figured out long before those FB post
@larryhardside763624 күн бұрын
I really dont understand this. I feel like if you need to redesign the dang bolt to get it to be more reliable, just get a Vudoo. Buying a rimx action for full price and then paying extra on top of that to mimic what the CZ and Vudoo already do is like reinventing the wheel.
@EagleEyeShooting
24 күн бұрын
Because vudoo is littered with its own problems and garbage Rubbermaid mags. They promised a fix... here we are 2 years later. The Rim-X is way smoother and better mag. CZ's are not as quick to change mags during a match and are limited to chassis choices. Also they are harder to balance
@perdidocamaronero540024 күн бұрын
Does it work with the cone breech? Or does it require extractor cuts. I have no idea of the round count on my RimX I still have the original extractor and have never had a failure to feed or extract and only one misfire and it was with Eley ammunition and that lot misfired in three other rifles.
@EagleEyeShooting
24 күн бұрын
Yes. And same, I have two cases of ammo on a Rim-X with one extractor change. However, I'm aware to know how to maintain this system where others are not. Many have had issues with these extractors
@KevinWilliams24 күн бұрын
The loss of prefit barrel options seems like a huge downside, though. But, I rarely shoot my RimX because of extraction/ejection issues. Interesting.
@EagleEyeShooting
24 күн бұрын
Prefits suck. Having built over a 1000 of these Rim-X's and testing prefits. Tolerances are not tight enough with prefits. I challenge anyone to show a prefit Rim-X's out perform one of mine
@KevinWilliams
24 күн бұрын
@@EagleEyeShooting I can't disagree! LOL My RimX is just collecting dust due to horrible extraction, so this development is very tempting.
@user-vf2hq3xg9c24 күн бұрын
Have you got a patent on that conversion ?? Rim-X needs the upgrade!
@EagleEyeShooting
24 күн бұрын
Nope. Perhaps Zermatt may consider just implementing this. I'll be in contact with them. Not seeking any credit/ compensation
@briansupermag391824 күн бұрын
So I have your RimX you built me about 6 months ago. Is it something that is easy to order and install or do you need the whole gun back to do any kind of work? Also whats the price
@EagleEyeShooting
24 күн бұрын
Will be available only for previous, current and future clients. Working out some cost details. I will need the barreled action to mod the bolt and cut extractor reliefs in the barrel.
@briansupermag3918
24 күн бұрын
@EagleEyeShooting what kind of turn around time do you expect? Thx Kenny. My RimX is a hammer
@treefeller22lr1824 күн бұрын
So if the competition changed there mag or an aftermarket mag option came out it would be better?
@EagleEyeShooting
23 күн бұрын
Lol.. 2 years now. Customer service reflects a product and those shops who build off them. Only if you could see the emails I get daily from folks who complain about the "competition" lack of customer service and how their rifles perform asking us to help them..... Besides theirs about to be a few better options 😉 get off the band wagon dude
@kyley80824 күн бұрын
What leg covers is that pls
@EagleEyeShooting
24 күн бұрын
Fehu outdoors
@ShooterB124 күн бұрын
Will the extractors work on a CZ? Or are they same, but different
@EagleEyeShooting
24 күн бұрын
They will work. Basically picking up where Volquartson failed lol. I'll have these available separately soon. They bite much harder than the factory CZ457
@ShooterB1
24 күн бұрын
@@EagleEyeShootingthat is great to hear! American made goodness
@markthibault857924 күн бұрын
Great mod. Why not just go with a custom CZ 457 build in the first place and skip the 700-based designs altogether? From what I've seen on the channel, it's not like the 700-based stuff shoots any better when comparing custom builds. What am I missing?
@EagleEyeShooting
24 күн бұрын
The CZ457 is a great choice. But some prefer having full size mags to mimic a centerfire and rem 700 accessories. The Rim-X is also way smoother and easier to balance compared to a CZ457
@markthibault8579
24 күн бұрын
I'm hoping the new MDT ACC Premier Gen2 just released will help with balance. Combine it with a DPG custom 457 barreled action with a 24" thick pipe barrel would help get the weight out front.
@EagleEyeShooting
24 күн бұрын
Absolutely.! Should be getting one of those chassis soon
@williamleonard899823 күн бұрын
Do you have to modify the barrel cut
@EagleEyeShooting
23 күн бұрын
Not sure what you mean? I have to add extractor slots to the barrel, however it'll still work with the original also
@williamleonard899824 күн бұрын
Will that be included in all new builds
@EagleEyeShooting
24 күн бұрын
Upgrade offering
@andybob913223 күн бұрын
At this point with your knowledge you should design your own action 🤷♂️🤷♂️
@EagleEyeShooting
23 күн бұрын
Lol. Perhaps 😄👍
@joshwilson700824 күн бұрын
If only it were a 60 degree throw :(
@EagleEyeShooting
24 күн бұрын
Right? I got something coming out soon 😉
@FishingBenB
24 күн бұрын
YES!!! Here for it! @@EagleEyeShooting
@joshwilson7008
22 күн бұрын
@@EagleEyeShooting anddd there goes all my savings! 😂
@mmgee24 күн бұрын
And what were you expecting for $1400?
@EagleEyeShooting
24 күн бұрын
Lol I agree. None of these actions should have any of this issues..... while I spent a great deal fixing flaws. It's time I change that with something of my own 😉
Пікірлер: 95
I must say Kenny once again you have amazed me. If there are any doubters on Kenny’s work, you will not be for long. I have purchased several rifles from Kenny and he has over delivered every time. As for Rim fire rifles, I have all 3, my first being an CZ457, Voodoo and RimX. Kenny built my Voodoo and it trust me when I say it shoots better than I ever could shoot. I shot so well I had Kenny build me a bolt action 6ARC and a 6 Creedmoor and I have to say they both shoot lights out. Kenny if you start doing upgrades to RimX bolts, I will ship mines out to you ASAP. Keep up the great work and thank you for making us sub par shooters look like pros!
That KICKS ASSSSSS !!!! Now to start saving for a RimX SS Benchrest Rifle !!!!!!!
@EagleEyeShooting
23 күн бұрын
Thanks for the YT post my brother! Hey give me a call. Got some things in the works and think you might like
So you're telling me that you can now get a RimX with CZ reliability... Absolute game changer!
@EagleEyeShooting
24 күн бұрын
Yes! I finally got my custom CZ457 extractors in. I've been running this upgrade on my personal Rim-X for 8 months this lol
@larryhardside7636
24 күн бұрын
forgive me if im wrong, but this sounds like sarcasm to me. Why spend the money on a rimx and then extra to do the work when you can just get a CZ or vudoo and save money?
@CopperStarPrecision
24 күн бұрын
@@larryhardside7636 Kenny built my CZ which is what I run in competition and it's exceptional. While I am a CZ fanboy there are merits to the RimX. RimX and Vudoo are Remington 700 clones which means a much wider variety of stocks/chassis/triggers than for the CZ. It also makes it easier to build a true trainer for a centerfire rifle with the same footprint. The downside to the Vudoo is the magazine which suffers from rimlock. Every match I've ever competed in has had a mag fail to load a round from people shooting Vudoo rifles. The RimX mags are better, but there is the problem of broken extractors. This solves that issue and moves the industry forward.
@EagleEyeShooting
23 күн бұрын
@@CopperStarPrecision perfectly said. Moving this industry forward. 👏
Constant innovation and improvement is what sets you apart in my opinion Kenny……. The orange Tennessee CZ you built is still shooting crazy accurate. Take care and I’ll be in touch at some point about a 2500x
Very effen interesting. Looks like a real win. Good on you.... Well done..
Another brilliant idea that has been solved by the skilled Eagle Eye. Hornady still hasn’t thanked or acknowledged Kenny for solving a couple of their problems with certain cartridges yet.
I like a guy that is aware of improvement can always be made! Great Job Kenny!
Kenny, let me know when to send in my Rim-X you built for the bolt upgrade. Awesome idea!
So you can make my already incredible DPG RimX even better , I’m in!!!
@EagleEyeShooting
24 күн бұрын
Lol thanks brother and yes. Will be offered for only our builds exclusive
Wow, good job, well done!
Okay, now I have to absolutly have one!!! AWESOME smithing man!!!
Nice work Kenny! What a great mod and looks like those extractors will also solve the problems we were having with the CZ extractors. 😀
Where have you been? Missing your videos
@EagleEyeShooting
24 күн бұрын
Building rifles! Lol slaving away. I got a lot of things to catch up on and exciting new products I have coming out
Good job, Kenny! S-7 is a good choice.
Great to see Kenny.
G’day Kenny, good to see and hear from you. We hope that your gunsmithing business is going gangbusters.
That is a sweet rifle
This is huge!!!
Congratulations! 👍🇺🇲
Dang man you know your business always thinking to make things better can’t wait to get the hm2 from you guess I’m going to have to get a rim x now
@EagleEyeShooting
24 күн бұрын
Actually plan on working on that sooner. I'll be in touch!
Way to knock it out of the park my friend!
@EagleEyeShooting
24 күн бұрын
Thanks Anthony! Hey did you find a 25 cal barrel?
Very cool! Hope you and the family are doing well!
@EagleEyeShooting
24 күн бұрын
I'm alive and doing well. Just super busy
Need this!
I’m on the list for a RimX build from Kenny. I cannot wait to get the rifle for next year’s PRS season.
Hmm. That little problem is exactly why I’ve never bought a RimX or Voodoo Never seen one not jam during a match while my CZ 457 runs like butter. Knew someone would figure something out. Good work
@EagleEyeShooting
23 күн бұрын
I'm with you. After running all 3 platforms. I can say the CZ457 has been the most reliable and has got me more podium finishes at local matches
Would be nice to see a video of rifle with new bolt and barrel mods shooting (down range results), and then install original rim x bolt with modified barrel and shoot again?
@EagleEyeShooting
21 күн бұрын
I could do that 👍
@williamleonard8998
21 күн бұрын
@@EagleEyeShooting very interested. I have a build in the que
@EagleEyeShooting
21 күн бұрын
Much appreciate the opportunity brother. This mod will be available for our clients first
Do you have to do anything to the barrel to have a place for the extractor
Nice. 👍
I've put 10,000+ rounds through my Vudoo 360 with very few feed issues. If you load the magazines with as much care as Kenny builds his rifles you won't have issues.
@EagleEyeShooting
24 күн бұрын
Lmao. You don't run the gun hard enough like some of us then. But yeah.... I'd take a Rim-X over a V22 any day.
@John-uo1qf
24 күн бұрын
@@EagleEyeShooting Living in America it's nice to still have choices. I'm working on running my bolt faster but in the meantime am enjoying my division wins in NRL22 competitions!
im going to have them build me a gun like this
I would patent it ASAP.
You built my RimX rifle back when you started doing them. So I would like to get this mod done to my bolt when it's available.
@EagleEyeShooting
23 күн бұрын
Definitely will be available for my clients exclusively
In my next life I hope that I’m part Asian lol. Kenny is one smart cookie
@EagleEyeShooting
23 күн бұрын
Lol... I barely qualify as asian. Filipino's are the Spanish white rice eaters
@michaelcoley9360
23 күн бұрын
@@EagleEyeShooting I guess I’ll start eating more rice 🍚
Hey Kenny, love my rifle that you built. Can I get the modification head for my existing bolt? Thanks
@EagleEyeShooting
24 күн бұрын
Absolutely, this will be exclusive to our builds only. I'll send a email campaign when I have my batch of extractors ready
Need more explanation about magazine. Because i have mag problem
Link pls . Wanna buy it🎉
I think MCR just came out with the same thing
@EagleEyeShooting
24 күн бұрын
Uses Vudoo extractors which arnt as reliable for this upgrade....while great minds think alike, I had this figured out long before those FB post
I really dont understand this. I feel like if you need to redesign the dang bolt to get it to be more reliable, just get a Vudoo. Buying a rimx action for full price and then paying extra on top of that to mimic what the CZ and Vudoo already do is like reinventing the wheel.
@EagleEyeShooting
24 күн бұрын
Because vudoo is littered with its own problems and garbage Rubbermaid mags. They promised a fix... here we are 2 years later. The Rim-X is way smoother and better mag. CZ's are not as quick to change mags during a match and are limited to chassis choices. Also they are harder to balance
Does it work with the cone breech? Or does it require extractor cuts. I have no idea of the round count on my RimX I still have the original extractor and have never had a failure to feed or extract and only one misfire and it was with Eley ammunition and that lot misfired in three other rifles.
@EagleEyeShooting
24 күн бұрын
Yes. And same, I have two cases of ammo on a Rim-X with one extractor change. However, I'm aware to know how to maintain this system where others are not. Many have had issues with these extractors
The loss of prefit barrel options seems like a huge downside, though. But, I rarely shoot my RimX because of extraction/ejection issues. Interesting.
@EagleEyeShooting
24 күн бұрын
Prefits suck. Having built over a 1000 of these Rim-X's and testing prefits. Tolerances are not tight enough with prefits. I challenge anyone to show a prefit Rim-X's out perform one of mine
@KevinWilliams
24 күн бұрын
@@EagleEyeShooting I can't disagree! LOL My RimX is just collecting dust due to horrible extraction, so this development is very tempting.
Have you got a patent on that conversion ?? Rim-X needs the upgrade!
@EagleEyeShooting
24 күн бұрын
Nope. Perhaps Zermatt may consider just implementing this. I'll be in contact with them. Not seeking any credit/ compensation
So I have your RimX you built me about 6 months ago. Is it something that is easy to order and install or do you need the whole gun back to do any kind of work? Also whats the price
@EagleEyeShooting
24 күн бұрын
Will be available only for previous, current and future clients. Working out some cost details. I will need the barreled action to mod the bolt and cut extractor reliefs in the barrel.
@briansupermag3918
24 күн бұрын
@EagleEyeShooting what kind of turn around time do you expect? Thx Kenny. My RimX is a hammer
So if the competition changed there mag or an aftermarket mag option came out it would be better?
@EagleEyeShooting
23 күн бұрын
Lol.. 2 years now. Customer service reflects a product and those shops who build off them. Only if you could see the emails I get daily from folks who complain about the "competition" lack of customer service and how their rifles perform asking us to help them..... Besides theirs about to be a few better options 😉 get off the band wagon dude
What leg covers is that pls
@EagleEyeShooting
24 күн бұрын
Fehu outdoors
Will the extractors work on a CZ? Or are they same, but different
@EagleEyeShooting
24 күн бұрын
They will work. Basically picking up where Volquartson failed lol. I'll have these available separately soon. They bite much harder than the factory CZ457
@ShooterB1
24 күн бұрын
@@EagleEyeShootingthat is great to hear! American made goodness
Great mod. Why not just go with a custom CZ 457 build in the first place and skip the 700-based designs altogether? From what I've seen on the channel, it's not like the 700-based stuff shoots any better when comparing custom builds. What am I missing?
@EagleEyeShooting
24 күн бұрын
The CZ457 is a great choice. But some prefer having full size mags to mimic a centerfire and rem 700 accessories. The Rim-X is also way smoother and easier to balance compared to a CZ457
@markthibault8579
24 күн бұрын
I'm hoping the new MDT ACC Premier Gen2 just released will help with balance. Combine it with a DPG custom 457 barreled action with a 24" thick pipe barrel would help get the weight out front.
@EagleEyeShooting
24 күн бұрын
Absolutely.! Should be getting one of those chassis soon
Do you have to modify the barrel cut
@EagleEyeShooting
23 күн бұрын
Not sure what you mean? I have to add extractor slots to the barrel, however it'll still work with the original also
Will that be included in all new builds
@EagleEyeShooting
24 күн бұрын
Upgrade offering
At this point with your knowledge you should design your own action 🤷♂️🤷♂️
@EagleEyeShooting
23 күн бұрын
Lol. Perhaps 😄👍
If only it were a 60 degree throw :(
@EagleEyeShooting
24 күн бұрын
Right? I got something coming out soon 😉
@FishingBenB
24 күн бұрын
YES!!! Here for it! @@EagleEyeShooting
@joshwilson7008
22 күн бұрын
@@EagleEyeShooting anddd there goes all my savings! 😂
And what were you expecting for $1400?
@EagleEyeShooting
24 күн бұрын
Lol I agree. None of these actions should have any of this issues..... while I spent a great deal fixing flaws. It's time I change that with something of my own 😉
@mmgee
24 күн бұрын
@@EagleEyeShooting good job! 👍