Thanks for all the video’s Adam. I just got into nitro last month and you’ve really helped me learn that part or R/C
@AdamDrake
10 ай бұрын
Glad to help
@hgthehulk223510 ай бұрын
Awesome thank you for all the videos !! And passing on all the knowledge and wisdom !!
@AdamDrake
10 ай бұрын
My pleasure, happy to help!
@TruggyDriver6910 ай бұрын
I use the ProTek clutch w/ 4x aluminum shoes w/ 4x 1mm springs in truck (Ultimate M5S and MSX and works perfectly at least w/ tracks in the southeast all the way to Thornhill. I tried the 2x2 shoes and it wasn't working out well at all. I personally think ambient temps have a play in clutch tuning just like it affects an engine. Another thing is having good throttle response/control is key. Great vid and thanx Adam.
@Fullsenditrc10 ай бұрын
Very good info I know nothing about clutches just the springs thanks for the info !!!
@AdamDrake
10 ай бұрын
No problem 👍
@a2rc10 ай бұрын
Yep. Makes a lot of sense. - Best thing to do is drive with your current set-up to see how it is and then adjust from there. - Thanks for the nice vid ❤
@AdamDrake
10 ай бұрын
Thank you!
@MOONOVERMIAMI10 ай бұрын
Hello great video information Adam
@AdamDrake
10 ай бұрын
My pleasure, thank you!
@RazorRC10 ай бұрын
Great video and explanation!
@AdamDrake
10 ай бұрын
Thank you!
@briancarroll624510 ай бұрын
Werks clutch 2 carbon 2 aluminium, works well, cheers Adam👍🇮🇪
@AdamDrake
10 ай бұрын
Very nice, thank you!
@matthewjhardy10 ай бұрын
I’m running the stock Mugen clutch in my MBX8R. I noticed that there seems to be 3 aluminum clutch shoe options from Mugen. I believe the kit comes with “no dot” aluminum shoes and then 1 dot and 2 dot are available. I’ve had a little trouble finding good info on the differences. I’m guessing the 2 dot are the hardest. Would love to hear some good info on this and in what circumstances you’d run harder or softer aluminum shoes in addition to the carbon. Would you typically increase the size of the spring as you go up in aluminum shoe hardness?
@adamcamacho567510 ай бұрын
You're the man ty
@AdamDrake
10 ай бұрын
Thank you!
@flubber78810 ай бұрын
Hi Adam. I usually run all aluminum shoes on my mbx7r. I do find though, that the car feels a bit too quick out the corners, so I end up spinning
@AdamDrake
10 ай бұрын
Maybe try using one or two softer clutch springs to make the engagement earlier and smoother.
@user-bu5kd8wh1z7 ай бұрын
Hi Adam. I am using the mugen vented 14 tooth clutch bell and aluminium shoes. Would you say that is ok to run like that
@franciscovazquez458910 ай бұрын
👍🏼👏🏼👌🏼
@danross366810 ай бұрын
Steel flywheel or aluminum on buggy, using the AD3 engine? Thanks!
@rubencriviDT10 ай бұрын
Adam, do you know if I can install the Mugen (or any other) 4 clutch shoe kit (including the flywheel and clutch bell) in my MBX5? I have the 3 clutch shoe that came with the kit, all aluminium and 1.0 springs. Thanks!
@AdamDrake
10 ай бұрын
Yes, you could use the Mugen 4 shoe clutch set-up and or the OS 4 shoe clutch setup that we have available on www.thedrakeracing.com
@jn821810 ай бұрын
Very informative for nitro rookies.
@AdamDrake
10 ай бұрын
Glad it was helpful!
@brucebartlett195010 ай бұрын
Great tip would of not got there lesson learned thx.
@AdamDrake
10 ай бұрын
Glad to help
@Douger31810 ай бұрын
what about the tekno clutch im sure all is the same corect
Пікірлер: 30
Thanks for all the video’s Adam. I just got into nitro last month and you’ve really helped me learn that part or R/C
@AdamDrake
10 ай бұрын
Glad to help
Awesome thank you for all the videos !! And passing on all the knowledge and wisdom !!
@AdamDrake
10 ай бұрын
My pleasure, happy to help!
I use the ProTek clutch w/ 4x aluminum shoes w/ 4x 1mm springs in truck (Ultimate M5S and MSX and works perfectly at least w/ tracks in the southeast all the way to Thornhill. I tried the 2x2 shoes and it wasn't working out well at all. I personally think ambient temps have a play in clutch tuning just like it affects an engine. Another thing is having good throttle response/control is key. Great vid and thanx Adam.
Very good info I know nothing about clutches just the springs thanks for the info !!!
@AdamDrake
10 ай бұрын
No problem 👍
Yep. Makes a lot of sense. - Best thing to do is drive with your current set-up to see how it is and then adjust from there. - Thanks for the nice vid ❤
@AdamDrake
10 ай бұрын
Thank you!
Hello great video information Adam
@AdamDrake
10 ай бұрын
My pleasure, thank you!
Great video and explanation!
@AdamDrake
10 ай бұрын
Thank you!
Werks clutch 2 carbon 2 aluminium, works well, cheers Adam👍🇮🇪
@AdamDrake
10 ай бұрын
Very nice, thank you!
I’m running the stock Mugen clutch in my MBX8R. I noticed that there seems to be 3 aluminum clutch shoe options from Mugen. I believe the kit comes with “no dot” aluminum shoes and then 1 dot and 2 dot are available. I’ve had a little trouble finding good info on the differences. I’m guessing the 2 dot are the hardest. Would love to hear some good info on this and in what circumstances you’d run harder or softer aluminum shoes in addition to the carbon. Would you typically increase the size of the spring as you go up in aluminum shoe hardness?
You're the man ty
@AdamDrake
10 ай бұрын
Thank you!
Hi Adam. I usually run all aluminum shoes on my mbx7r. I do find though, that the car feels a bit too quick out the corners, so I end up spinning
@AdamDrake
10 ай бұрын
Maybe try using one or two softer clutch springs to make the engagement earlier and smoother.
Hi Adam. I am using the mugen vented 14 tooth clutch bell and aluminium shoes. Would you say that is ok to run like that
👍🏼👏🏼👌🏼
Steel flywheel or aluminum on buggy, using the AD3 engine? Thanks!
Adam, do you know if I can install the Mugen (or any other) 4 clutch shoe kit (including the flywheel and clutch bell) in my MBX5? I have the 3 clutch shoe that came with the kit, all aluminium and 1.0 springs. Thanks!
@AdamDrake
10 ай бұрын
Yes, you could use the Mugen 4 shoe clutch set-up and or the OS 4 shoe clutch setup that we have available on www.thedrakeracing.com
Very informative for nitro rookies.
@AdamDrake
10 ай бұрын
Glad it was helpful!
Great tip would of not got there lesson learned thx.
@AdamDrake
10 ай бұрын
Glad to help
what about the tekno clutch im sure all is the same corect