Thank you for your time to show how can change the leaf springs x xterra06

Great job man. Just did this....and i had to go back and put more grease on bushings because they wouldn't slide properly...never mind the two ignorant arm chair quarterbacks about grease....totally necessary

Really helpful video, thank you.

@sergiikvasnyi188

6 жыл бұрын

Thanks!

Any suspension work is way harder and takes longer without an impact driver and air ratchet.

@sergiikvasnyi188

5 жыл бұрын

Absolutely agree, would be nice to get those tools from a happy viewer. 😉

@fernandobriseno8164

Жыл бұрын

​@@sergiikvasnyi188 craigslist or Facebook market. Ppl practically giving them away for like $50. Especially spiteful x-wives and x-gfs 😂

good video- I just did mine (2012 xterra) before watching this - too bad! I recommend taking off corner plastic trim for access as you show, i just loosened screws and bent it up out of the way. Also always replace shackles when you do the spring packs. OEM shackles are press fit pins and hard to remove. Mine were seized, and rusted, but i didn't have shackles so reused. will advise how that goes...... Used penetrant and let it sit for a day, then started with a screwdriver, then 1 then another pickle fork and just pounded and pounded until they moved!. Also as a safety issue, a spring has retained energy-release one end before removing ubolt plate.....mine shot off when i loosened last of the 4 nuts...keep hands clear. Another idea - My X only broke BOTTOM (3rd) leaf, i think i would just replace that leaf if i had to do it again, given the bend remaining in the other 2. A spring shop (not autozone/ canadian tire) can supply the part and it would be less work and less cost...

the man loves his grease

@goldenretriever6261

3 жыл бұрын

Probably lives in rust belt

nice job

@sergiikvasnyi188

5 жыл бұрын

Thank you

Didn’t need to take the bumper and all that off.. just jack the body up, Lower the axel keep the front and rear bolt in the leaf spring attached undo the spring pack slide in new spring, decompress pack put on ubolt let it back down done

I grabbed the SAME grease. for mine!!

Very helpful video. Did you do anything with the front to make up for the 2.5" lift in the rear?

Was there a sleeve for the front bushing?

hey , thank you for the video it is very helpful , where do you get the shackles ?

@sergiikvasnyi188

6 жыл бұрын

Here's the URL of the shackles from where I bought it: www.4wheelparts.com/Suspension/ARB-Shackle-And-Pin-Kit-OMEGS15.aspx?t_c=1&t_s=101&t_pt=8660&t_pn=ARBOMEGS15#ctl00_ContentPlaceHolder1_pDetail_productSpecs

Those jacks are making me nervous,

Can you please share the li k were to get the Shackles

Hey, Nice job. Sergii I have heard complaints that this setup becomes very noisy with popping sounds. Also, the ride becomes very rough. Any comments or findings?

@sergiikvasnyi188

4 жыл бұрын

Hello, I am riding with a trailer twice or three times a week and still had no complaints. Also there are air suspension installed as well. Very happy with it.

@geom2816

4 жыл бұрын

@@sergiikvasnyi188 Hello from Montreal Canada - Again thank you so much for your input - Keep making great videos of the X

I am the American version of this Slavic gentleman. He covers everything in grease whereas I cover everything in anti-seize.

where you got all the parts ?

@sergiikvasnyi188

6 жыл бұрын

Hi, I bought all the parts from www.4wheelparts.com/

Where did you buy your leafs springs?

@sergiikvasnyi188

3 жыл бұрын

www.4wheelparts.ca/

Где рессоры взял? Хочу себе тоже взять но не где не найду

@sergiikvasnyi188

6 жыл бұрын

Part Number ARBCS061R www.4wheelparts.com

@user-rq7rz1wz4f

6 жыл бұрын

Sergii Kvasnyi thanks!!!

Serega, bez instrymentov voobshe ne ochen. I domkrat nado nastoyashyi.

Hi how much was all of this?

@sergiikvasnyi188

2 жыл бұрын

Hello, in 2018 it was around $950CAD for this whole set.

You need more grease man. Grease the hole car, you will love it ...