You weren't even finished and it still did all that?!?!?!😮 AMAZING! 😮

Excellent video, Nick. Many, many thanks. I appreciate you taking the time to make it! You rock!

Súch a Beatiful piece of Art❤!!!!.

@nickg666

5 ай бұрын

Thank you!

@elversusnexusseis.7591

5 ай бұрын

Thank You For Share Your Excelent Proto. Pack,and explain each part of it,and Powerful Sounds .

Just recently replaced my old speaker with the Kicker speaker you recommended here. So much better. Sounds amazing!

@nickg666

Жыл бұрын

They are absolutely phenomenal

@ZerocoolsPropsandCollectibles

3 ай бұрын

Which kicker speaker and what size talent cell?

Recently bought the kit based on your review and had no idea there's a slime tether function on the red switch. The kit has everything you need plus you're also able to replace every sound to your liking. Very happy with it 😁

@nickg666

Жыл бұрын

Glad I was able to steer you in the right direction 👍👍👍

@stewartmcminn7773

Жыл бұрын

@Darth Nick I managed to edit the sound board too so it is 100% unique

So the cs smoke kit plugs into the Nijatunes board ! thats brilliant

Wow, for all that functionality this pack is incredibly clean on the inside. Super impressive. I had just come to terms with the fact that to have cool features you’re bound to have a rats nest inside.. awesome work my dude

Now this is a PROTON PACK BOYS AND GIRLS! Not that chessy Hasbro crap! This is what I want!

😍😍😍😍

Thanks for this video! I'm in a couple of the FB groups and I've been very on the fience about what kit to use. Mostly because I wanted to use my Spengler Wand in the mix. Ninjatunes has Afterlife sound fonts I think so maybe I just build a new wand and keep the Spengler for a shelf queen.

@nickg666

Жыл бұрын

That's a similar path to the one I took. Actually, the Spengler wand was my motivator to build a pack in the first place. But I ended up building my own when I actually got to it, because it was less complicated than integrating the Spengler one

Currently have a gbfans kit in my setup but I have thought about switching over to a ninjatunes setup eventually. The switch configurations and not having to access the board to switch between movie and game mode is really nice on the ninjatunes. What car speaker do you use with your setup?

@nickg666

Жыл бұрын

I am using a Kicker 6.5" speaker. A little spendy as I was only able to find them as a set. The best situation would be to find someone to split the set with...or you can PM me and buy my other one if you're interested. $30 plus shipping Kicker 46CSC654 Car Audio 6 1/2" Coaxial Full Range Stereo Speakers Pair CSC65 a.co/d/j0IIZAS

Does anyone have these sound files? I have the GBFans files. I ended up getting that soundboard because I already had their light board and wand kit. I am obsessed with the NinjaTunes “start up” sound. It’s so unique. And I’ve looked for a version of it everywhere. Is there anyplace I would be able to find just that sound?

Bloody hell that's alotbof functions 😳 how many wires are there in the loom to the pack? Nevermind I just watched the end lol

hello! i was hesitant on getting into electronics work, but you’ve made this a little less scary. with that being said, i have a couple of questions. can this kit be installed into the Hasbro Neutrona Wand? do you think the electronics would be able to fit into the Haslab Proton Pack?

@nickg666

Жыл бұрын

Yes it would be able to fit in the haslab pack, but I really don't think it would be able to interface with the Spengler wand's existing electronics. I know people have done it with the gbfans kit, but I don't have any personal knowledge of what's involved. The NJT kit is a bit better than the gbfans kit as far as features, but I think the gbfans kit has more modular options. Honestly, if it were me, I would just build a wand instead of using the Spengler one. It's a cool shelf piece but it doesn't look as good or feel as good in hand as one of my printed ones. I understand building isn't for everybody though. If you want to try and use the Spengler wand, I would look into the gbfans kit.

Hello I'm just curious is your whole shell 3d printed? Anyways just asking because i have a ben of kent pack and am curious how everything is going to be installed when my kit arrives and when i have to do the install. Thank you very much and your pack is looking great thanks for sharing.🙂👍✌️

@nickg666

9 ай бұрын

Yes, mine is all 3d printed. It should actually install a little easier into a BOK shells. I have to follow specific wire channels for mine. Your's will give you a bit more freedom. My one recommendation would be to not over build your wand until you have the kit in hand. The wand almost needs to be built around the electronics kit. You'll see what I mean when you start to assemble it

Just FYI, CS Prop Shop has changed their name to C & A Prop Design. Your link still works. Same guys and same quality products.

@nickg666

Жыл бұрын

Yeah. I saw that last week. It was right after I posted the video too lol

Out of curiosity, is it at all possible for the pack to go straight into 'movie mode' when you flip the red ion switch, like the startup sequence in the elevator? Or is that standby sequence necessary?

@nickg666

8 ай бұрын

Yeah, you would just need to flip the wand activate switch on first. If the wand activate switch is already in the on position when you flip the red switch, it'll fire on like in the elevator scene

@Survivor00

8 ай бұрын

@@nickg666 Thanks!

My NinjaTunes kit is arriving in 2-3 weeks. Can you guide me to some place where I could get those 3D printed mounting brackets and such? The ones I find are for the main back plate, but I'd like to install most things into the shell and not on the backplate. Also, what's the speaker model and size? Thanks in advance!

@nickg666

Ай бұрын

The files to mount them to the shell side are also in the q pack files. I don't remember where, but I promise they're in there. The speaker is a 6.5 inch Kicker. There's an amazon link to it somewhere further down in the comments. There's a whole thread about the speaker. It's a little spendy but it's sooooo worth it

Can you add the ninja kit to the Hasbro proton pack also using the Hasbro wand do you have to remove all the insides of Hasbro Neutron wand and the proton pack as well and install the new kits to make the ninja kit work , how would you get the cables Hasbro wand through the proton pack there's no opening in the Hasbro want any information would help thank you

@nickg666

Жыл бұрын

You COULD install a full NJT kit into the haslab. However, I would recommend contacting Konstantinos directly first because I believe he has another version of his kit that is specifically designed to work with the haslab pack. There's a link to his Facebook group in the video description.

Since you're showing off your incomplete pack build I would love to see how the speak is properly mounted and both sides of the motherboard. do you have a hole cut out or speaker grills?

@nickg666

Жыл бұрын

The hole is cut out for the speaker. One nice thing about the 3d printed pack is that it has .dxt files for motherboards with precut speaker holes of various sizes. In the negative space from the speaker hole, they cut in the metal ribbon cable clamps. So you basically get those for free with the motherboard. You just send the file to a company called 'sendcutsend' and about a week later, you have your motherboard with predrilled mounting holes and precut speaker hole. But yes, the speaker is mounted in a cut out and the exposed side faces my lower back. Here's a link to my first proton build. The last two pictures in the gallery have close ups of the speaker setup photos.app.goo.gl/8PNcB5MWxDK4gtNy9

@jonogunn

Жыл бұрын

Thank you so much nick. Yah I already ordered my motherboard unfortunately I don’t think any of the pre-existing files had my speaker size (5.25” I believe). And if I knew what those clamps were I may have took a chance at it anyway damn! That’s a bonus deal! I’ll most likely drill my own holes. I just wasn’t sure if it’s okay to bolt the speakers right against the board or if I need something in between

@nickg666

Жыл бұрын

@@jonogunn It should be fine. Just make sure you use the motherboard/alice frame spacers. There's plentiful of room with the gap. You can even mount the talentcell in that space

Is this compatible with the life size spirit pack and 84 Spangler wand?

@nickg666

3 ай бұрын

This particular kit is not compatible, but he does have a haslab version. You'll need to contact Ninjatunes2001 directly for more information on that kit. Link to his information in the description

Amazing work! I'm very interested in the Ninja Tunes soundboard. Particularly the startup sound. Is that from the GB game? Every other board, and videos of Ninja Tunes boards others have posted online all have the similar "Move Startup" sound. This one is slightly different and so much cooler and sleeker. Is that standard, or an upgrade to the sound files?

@nickg666

Жыл бұрын

I believe I have the latest version of the NJT kit. This is the third kit I've bought from him. My buddy still has the old one and there are a few differences. He tends to upgrade them gradually, so each generation is a little better than the ones that came before. He does offer support to customers with older kits though. The last version didn't support the flash bulb in the tip, but my friend contacted him and got him completely hooked up with the new wand board for it and only charged him for shipping. Great guy to work with. I believe that start up sound is standard

@DamianBartolacci

Жыл бұрын

@@nickg666 Thank you so much!

Do you have a link to the specific kit ?i found so much on the ninja tunes etsy, but not sure id the specific kit you are talking about. Thanks

@nickg666

2 ай бұрын

Contact him through his Facebook group. The link is in the description. He is very responsive. He will message you back directly. If this is the kit you want, then you want the og kit. He has other kits for haslab and few other options. He'll work with you to make sure you get the right things for your needs. Very cool dude to work with

@weaz549

2 ай бұрын

Thanks for the quick reply man​@@nickg666

Would this fit a haslab pack… and will it include afterlife

@nickg666

Жыл бұрын

This would fit a haslab pack with some modifications and you would need to probably build a wand. I don't what your skill level is for modding, but it could totally be done. And yes, there is an Afterlife option. It requires an extra board for the Ninjatunes kit and an LED ring from Amazon. If you're looking to use the Spengler wand, you may want to look into the GBFANS kit instead. I'm not an expert on that kit, but I know it has an interface available for the Spengler wand. If that's the route you want to go, I would join the gbfans Facebook group and ask some questions. Like I said, my knowledge on that kit is limited All that said, I'd build a new wand and use this kit with the Afterlife add on

What battery did you use?

@nickg666

Жыл бұрын

a.co/d/3hi34NN

Will this work for spirit life size pack ?

@nickg666

2 ай бұрын

I don't see why it wouldn't. I was considering ordering it for mine. I still might end up building my own wand for it though

Are these parts still available

@nickg666

7 ай бұрын

For the pack or for the electronics kit? The answer for both is yes. If you're looking for the files for the 3d prints, I have a link to the 3d printed group in the description for my "Intro" video. It's a few videos back in my feed. A link to ninjatunes is in the description of this video

How much is this total?

@nickg666

9 ай бұрын

I wanna say it's under $300 for the NJT kit and like $150ish for the CS Props smoke kit, but I can't remember specifically. That should be a pretty accurate ballpark though

when and where can we order it?

@nickg666

Жыл бұрын

Links are in the description for both Ninjatunes2001 and CS Props

Where in the pack did you put the NT circuit board?

@nickg666

Жыл бұрын

Watch the video start to finish. The second half is a full overview of the inside of the shell

@stewartmcminn7773

Жыл бұрын

@Darth Nick just looked lol, don't you have any protective housing for the circuit board???

@nickg666

Жыл бұрын

@Stewart mcminn There is a 3d printed frame underneath each board protecting it from the actual print. The frame is glued in and the board is screwed to the frame. Do you 3d print at all?

@stewartmcminn7773

Жыл бұрын

@@nickg666 unfortunately not I'm looking for control boxes to house it instead. Still searching though

@nickg666

Жыл бұрын

@@stewartmcminn7773 If you decide you want to use the 3d printed parts, let me know. I can ship within the US

hi, have you a proton pack thrower lights for sell?if yes how much wit h shipment costs to italy? ciao hai disponibili le luci per la thrower? se si prezzo compreso di spedizione per l'italia. grazie

@nickg666

5 ай бұрын

Konstantinos (ninjatunes) lives in Greece I believe. You would have better luck reaching out to him directly. There's a link to his profile in the video description

@lenamauramati9513

5 ай бұрын

@@nickg666 thank you

What speaker did you use, I used a fli 255w speaker and its rubbish. What's your speaker like with bass and sound?

@nickg666

Жыл бұрын

I used one of these. They're a little spendy, but sound AMAZING! These are an upgrade over the ones I used for my first pack. They have a great low end response, crystal clear, audio. Great for party mode. I believe this is the speaker Konstantinos is now recommending because of my feedback to him about it. When I first installed it, I asked him if he improved the amp on the latest kits because it sounded that much better. He told me that he didn't change anything and that it was just from having a better speaker KICKER CSC65 CS Series 6.5 Inch... www.amazon.com/dp/B07NS7NZLX?ref=ppx_pop_mob_ap_share

@stewartmcminn7773

Жыл бұрын

@@nickg666 awesome what is the wattage of these speakers?

@nickg666

Жыл бұрын

100 watt. 2 way channel. My old speakers were 3 way channel and it made the mix weird for certain songs recorded in stereo like certain parts were missing. Switching to 2 way cleared that up

@stewartmcminn7773

Жыл бұрын

@@nickg666 ahhh this why my bass is missing due to 3 way

@nickg666

Жыл бұрын

Yeah, I figured that one out the hard way lol

So no vent light when in "movie mode"? Seems inaccurate to me.

@nickg666

Жыл бұрын

Technically you're right, but if I'm being honest, I almost never use movie mode. When you're out at an event, you wanna show off the smoke effect, so it pretty much stays in TVG mode. I wouldn't call that a deal breaker lol

@jonzyjonzify

Жыл бұрын

@@nickg666 definitely not a deal breaker at all.