Someone give an medal to this guy

I can’t wait to try this on my ES3! Thank you for sharing 👏🏼

@fgtechtips

Жыл бұрын

Thanks

- Hey pal, just wanted to say thank you. I had just purchased my ES3, and I was wondering what that sound was going over bumps, now with your help, I went out and got 5mm elastic cord, and followed your steps. The front suspension is MUCH more durable now, and doesn’t bottom out on me, and I’m 260lbs. 😂 So thank you! I’ve liked, commented, and subscribed. I think I might be having a burning wire issue as well, as mentioned in your other video, but no wires are melted, or deteriorated that I can see. My scooter is at 440kms. (273 miles)

@fgtechtips

3 жыл бұрын

That's great! I'm glad the mod helped you too ;)

Thank you soooo much ❤🎉😅

Nice one sir :)

@fgtechtips

4 жыл бұрын

Cheers mate, thanks for watching !

Thanks !!!

On every small height difference (about 1cm) there is a loud noise like suspension topping off. I learned to avoid such noise by jumping over obstacles. It puts more strain on the rear suspension, but makes a smoother ride when you just jump over anything that would make hard noise. When you drive fast, you can easily jump over the large square metal covers on the road. I will try your mod, it's an interesting idea.

@fgtechtips

Жыл бұрын

Yes your suggestion is what I try to do too, but this mod helped a bit with the disturbing noise

I don't know mate. If you stiffen the spring with any material, even with elastic one, you will have a smoother sound for sure but the power that goes through the wheel will change. Maybe im wrong here, but if the engineerd it well, than the resonance should work like its originally desing and if you modify it even a bit like this will create resonance on other parts which are not obviously takes that much. That means on my theory that you solve a cracking sound which is annyoing as hell meanwhile creating a slowly developing crack on somewhere else in the body, wheel rod, or may pushing the wheel or increase tyres wear a bit more it than should be. Adding up with the overclocking software... well :) you got it from here. But as a solution for budget money, this was a good one and thank you for it !

@fgtechtips

2 жыл бұрын

I didn't stiffen it since using a thin elastic cable, it will increment the absorption power of the spring, if you exceed with the thickness that might be a problem as I said in the video

I'm having trouble finding a replacement front tire for the ES3 from Costco? Does anyone know where i can get one

can you do this on the es3plus from costco?

Thanks for the video, that was really helpful but i have a question i hear a lot of noise in my rear suspension when im on the road and i feel my es2 vibrating can you help me please

@samchannel4441

2 жыл бұрын

Maybe lubricate it that might help

Dove posso trovare gli accessori con cui hai modificato il ninebot? (maniglie, adesivi, ecc) Grazie :)

@fgtechtips

4 жыл бұрын

Ciao aliexpress

Un cavo da 5 mm va bene lo stesso?

@fgtechtips

3 жыл бұрын

4:50

So this is for it to make less noise? or does it make impacts softer?

@fgtechtips

3 жыл бұрын

It's for both

How do you get the speed past 25mph?

@fgtechtips

3 жыл бұрын

See my overclock video in the channel

@fgtechtips

3 жыл бұрын

kzread.info/dash/bejne/fnmZytmQmLaXac4.html

@splicecentral9079

3 жыл бұрын

@@fgtechtips thank you will check it out

@bakarimccoy9865

2 жыл бұрын

That’s KPH. Please take note of the difference. 25kph = 15.5mph 30kph = 18.6mph 32kph = 19.8mph (near the peak speed without pushing limits) 35kph = 21.7mph (peak speed I usually get consistently) 37kph = 22.9mph (fastest I’ve seen on dash under throttle) 40kph = 24.8mph (around fastest rolling downhill coasting w software mod) 50kph = 31.0mph (fastest reported with trace cut mod and expo batt profile)

Hio, Great Video, I Am A E25E Owner And I Had This Idea, CAN I Just Fill The Whole Spring FULL Of Silicone? May That Work The Same?

@fgtechtips

3 жыл бұрын

Hi, thank you. I have never tried but any material able to fit in the sprint and able to not to oppose too much resistance would work

@krisraps

2 жыл бұрын

@@fgtechtips Nice, But Its HARD To See Whast Are You Doing There, next Time Put A Light And Put The Camera Closer To The Object You Are Filming It

@fgtechtips

2 жыл бұрын

@@krisraps Hi This video if filmed in top quality in 4k, make sure your TV or PC is set at 4k so you can see all details. The contrast in this video is probably a bit too high that's why it looks a bit dark probably. It's anyway filmed with professional camera and lighting system

Sir what is that for by the way so it won’t be shakey? Thank you

@fgtechtips

4 жыл бұрын

This is mainly for enhance the shock absorber and avoid the annoying noise of the front suspension. You can watch my maintenance video for some other tips about vibration/front shakey

@josch5768

4 жыл бұрын

I will sir thank you for this content it helps a lot. Keep it up :)

How Did You Make That Your Scooter Goes THAT fast And Not Only 25kmh?

@fgtechtips

2 жыл бұрын

Hi did you check this other video in my channel ? kzread.info/dash/bejne/fnmZytmQmLaXac4.html

@HFTYKCK

2 жыл бұрын

Mine goes 32km 🤠

@regan44017

Жыл бұрын

@@HFTYKCK 32 on mine too but my partners one will fly along at 37 and completely blows me away on hills! We're the same weight too

Heres another idea....why not line the top of the spring with something like some hot glue to cushion it maybe.

@fgtechtips

3 жыл бұрын

Yes that could work but with the vibrations and movements I think the hot glue will deteriorate faster than the tape

@jigzonyt517

2 жыл бұрын

Because hot glue will fly off or crush in the first impact. In short you'll will have one softer bump then your back to normal. Even though I would recommend it even silicone would be a better option. Apply with a gun and try that 🤷🏼‍♂️ it isn't a method I would say is good because I have never tried but it would be better than hot glue for sure.

@fgtechtips

2 жыл бұрын

This method still working great since the time of the video and i never opened it anymore .....

@h.cedric8157

Жыл бұрын

I used the type of foam used for floor impact protection for children. I cut up a suitable sized strip, and it doesn't totally bottom out anymore. But my scooter doesn't have rear shocks, so I'm ordering an aftermarket kit soon

di che zona sei

@fgtechtips

3 жыл бұрын

Milano

@michelesergi2858

3 жыл бұрын

@@fgtechtips mi potresti chiamare xfavore 3483252813

@fgtechtips

3 жыл бұрын

Scrivimi via Instagram o tramite la pagina fb

Hey short question: e45d here, but same suspension in the front. I have the problem that the suspension doesn't really work bc I'm too light. 63 kg and as far as I can see, it mostly is on the highest stage, with me being too light to "push it in" so if I'm driving over a piece of uneven ground, it's not damping anything, driving as if there wasn't suspension at all. Anything I can do?

@stestar09

3 жыл бұрын

Eat more burgers like elvis

Saving this one