Nightmare Before Christmas Tumbler Glow-in-the-Dark, Tattoo, Revised, Minimal Editing
Тәжірибелік нұсқаулар және стиль
Last year, I uploaded a video showing an early attempt at using full-sleeve temporary tattoo art of Jack Skellington and Oogie Boogie from the Nightmare Before Christmas to make a glow-in-the-dark 30-oz skinny tumbler (see that video here: • Applying Nightmare Bef... ). The video was a pretty big success -- at least for me and my channel at that time -- so this year as we start to think about getting tumblers ready for Halloween, I wanted to offer an updated video since I've made quite a few of these tumblers in the interim and have learned a few things. I did not edit much in this video, and I used very limited "fast-mo" because I wanted to show folks how I create this tumbler in real time, with tips, tricks, and suggestions. PLEASE KEEP IN MIND: This is just my way of making this cup. There are other methods, other materials to use, other ways to cut/trim the art, etc. -- all of the ways are valid and wonderful. This video simply shows how I do it.
Check out some of the items I've made, listed in my Etsy store:
www.etsy.com/shop/LuxindaSwirl
Amazon Prime credit card* (earns 5% rewards): www.amazon.com/dp/BT00LN946S?...
Materials used in this video*:
KS Resin Liquid Stone UItra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
30-oz skinny taper tumblers: makerflocrafts.com/products/3...
Temporary tattoos: amzn.to/3f79TJI
Rustoleum glow paint: amzn.to/3i5uO1z
Marabu black alcohol ink: amzn.to/3f7HnaH
Piñata black alcohol ink: amzn.to/3iWUpsX
Mod Podge: amzn.to/3l805D8
Bat-shaped holo glitter: www.mrnolasglitter.com/collec...
Jackolantern-shaped holo glitter: www.theglitterguy.com/product...
Marabu Rainbow alcohol ink: www.mrnolasglitter.com/produc...
Mirror rotating display stand: amzn.to/3iVZr94
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
I love Swirls! Mostly swirls of color, but really any swirls at all - I think they add a beauty and grace to everything. So after I started making soap a few years ago, and needing some sort of biz name that didn't sound like everyone else's version of suds-r-us, I decided on Luxinda Swirl. Luxinda is a twist on my real name, and I quickly started putting swirls of color in all of my handmade soaps.
Now I'm branching out a bit, and I want to keep adding swirls to everything I do!
Пікірлер: 166
I absolutely love watching your videos! Please come back and make more! ❤
Wow what a great job! Absolutely seamless! Even though it doesn't show so glad you used the white background to make that tattoo really pop! Awsome glow-in-the-dark effect
Love this - love Jack
Just bought the tattoos! So excited to try this! Thank you!
@Luxinda
2 жыл бұрын
Enjoy!!
I truly enjoy your videos so helpful for someone wanting to start making tumblers
@Luxinda
Жыл бұрын
Thank you!! I’m glad you find them helpful 😊
I love this tumbler!!! I'm obsessed with NBC, definitely going to try this!! Thank you for sharing.
@Luxinda
2 жыл бұрын
Thank you!!! I'm sure yours will turn out great!
Linda your so informative thanks I learn every time I watch you🌻
@Luxinda
2 жыл бұрын
Thank you!!
Fits like a glove! That was fun watching you piece that together - AWESOME job!
@Luxinda
2 жыл бұрын
Thanks!
Such an awesome tumbler. Truly adore Halloween. Great tutorial. ❤ everything about this. 🥰
@Luxinda
11 ай бұрын
Thanks so much 😊
Omg love love love it
@Luxinda
2 жыл бұрын
Thank you!!!
Love this and all your videos! Thank you for sharing. I’m going to give it a try.
@Luxinda
2 жыл бұрын
Thanks very much! Good luck and have fun!
Cindy, I’ve really become so fond of all of your work and how you explain everything so well. So enjoyable!! Thank you for sharing your talents! 🙏🏻🙏🏻
@Luxinda
2 жыл бұрын
Thank you very much -- I appreciate it!
Absolutely love this!
@Luxinda
2 жыл бұрын
Thank you!
This is fascinating, lots of work but looks like fun. I haven't seen this technique before, nice work.
@Luxinda
Жыл бұрын
Thank you!!! Now that 30-oz “thick” or “fatty” tumblers are available, it’s actually much easier - lots less cutting and piecing involved to get everything to fit on the tumbler.
Super cool, thanks for the tips. Love your cups🥤💖
@Luxinda
2 жыл бұрын
Thanks for watching!
Hi from Martinsburg WV !!!! Love this and I'm going to make this for my niece!!
@Luxinda
Жыл бұрын
Hi there!! 👋👋👋 Have fun with it!!
Love This Video As Usual Thanks For Doing This Again‼️❤️‼️
@Luxinda
2 жыл бұрын
Thanks!!! Hopefully it was a tiny bit less chaotic and more helpful this time around (hopefully - LOL!).
Thank you sooo much for sharing this! I love it and made it. 💕
@Luxinda
2 жыл бұрын
Yay! 🥳 Thank you!
Ahhhh haaaa moment with layers of glow spray paint. I am trying to make Northern lights on a cup. Thank you!
@Luxinda
2 жыл бұрын
Sure thing!!
@beverlypeterson291
Жыл бұрын
Oooh!! That sounds fabulous!! Please show us how your project turns out!!❤
Can’t wait to try this out!
@Luxinda
2 жыл бұрын
Have fun! These tattoo cups are great!
Oooo great tutorial! Thanks for the details on cutting it out. Putting the little horned guy at the top is brilliant.. that pumpkin (with glitter shapes) on bottom is 🔥 Thanks for sharing your beautiful art LS!!! Have a groovylicious day.💯🤗🌹
@Luxinda
2 жыл бұрын
Thank you!! You too :D
Thank you for this great tutorial 😊 I can’t wait to try it !
@Luxinda
2 жыл бұрын
Thank you! Have fun!!
I found this video the other day, then went and bought everything to try it! Yours came out amazingly! Wish me luck! 😊🥰
@Luxinda
2 жыл бұрын
Thank you!! Good luck and have fun!! 👍
thank you for your video❤️ this is my daughters favorite movie I cant wait to try this!!
@Luxinda
2 жыл бұрын
Thank you!! Have fun with it!! 😁
Thisis so cool. Going to try it! You make it look soeasy! Thank you.
@Luxinda
2 жыл бұрын
Thank you!! Good luck and have fun 🤩
Absolutely fabulous!!! 4 people thumbs down this and that to me says jealousy… I’m enjoying your videos so much, thanks for sharing your art with us🤗
@Luxinda
2 жыл бұрын
Thank you - I appreciate it!!!
I had never seen your last one til after I posted mine last week it recommended it so the original was fresh in my mind! I love seeing how others tackle these massive tattoos!
@Luxinda
2 жыл бұрын
Thanks! I know other folks do their cuts and filler differently. I need to rework my Alice in Wonderland version and I’m hoping the 30 thick will make things considerably easier…🤞
I Really Love this cup!!!!!!!!💕💕❤️❤️
@Luxinda
2 жыл бұрын
Thank you!!
This is very cool
@Luxinda
Жыл бұрын
Thank you!! These are great Halloween tumblers!
This is so amazing … I’m so glad I came across this video .. I’ve had the tattoos for a min but was too scared to try it but you gave helpful pointers … just need to buy the sprays then ima definitely give it a try 🖤🧡
@Luxinda
2 жыл бұрын
Thanks! Go for it!
Really nice
@Luxinda
2 жыл бұрын
Thanks!
This is a great tutorial ! I actually got a cup from a tumbler exchange and I love it , I want to try it my self !! You did amazing
@Luxinda
2 жыл бұрын
Thanks so much 😊
I love this and your videos!! You are so funny!! I love Halloween too! I want to do “A Nightmare Before Christmas” Christmas tree!!
@Luxinda
2 жыл бұрын
Thank you! Oh, that would be amazing!!!
Love it. Bought one from you!
@Luxinda
2 жыл бұрын
Awesome! Thank you!
Very cool!!!
@Luxinda
2 жыл бұрын
Thanks!
Love watching your videos. Love this one im going to have to try tattoo patter.
@Luxinda
2 жыл бұрын
Thanks! Good luck and have fun with it!!
Never seen this technique on a tumble super neat
@Luxinda
2 жыл бұрын
Thank you!!
Hi I love the cutting directions. I wanted to share that I do an ombré light grey on top so that the white isn’t as hard on top. But I’m living how this works together. Thanks for sharing
@Luxinda
2 жыл бұрын
Great idea - thanks!!
I love this so much! The three little guys are Lock (horns), Shock (witches hat) and Barrel (skeleton mask). I was humming their "kidnap the sandy claws" song as you worked.
@Luxinda
2 жыл бұрын
Thank you! I will try my best to remember those names!! I’ve seen the movie, but (obviously) forgot a good portion of the details!🙄
Hi, Cindy! Rewatching this & hoping you’re doing well. Miss you!
This is so cool wish was a way to make these without the resin x
@Luxinda
Жыл бұрын
It’s funny, this video is quite old, but just today I’ve received two comments about wishing there were something other than resin to work with. You’re in luck! 😁 Here’s how I responded to the last comment: The most common alternative to resin is Brite Tone, which also has to be applied in multiple layers, but is considered non-toxic. Something like a spray or even brush-on varnish won’t provide enough protection.
Absolutely amazing!! Cannot wait to try this!! Have you ever tried using small, surgical grade scissors when cutting the intricate parts? Not sure if that would/wouldn’t make that part easier/just as tricky for you? Fabulous job & the glow in the dark part is insanely cool!!❤❤❤❤
@Luxinda
Жыл бұрын
These are really fun cups to make! And there are so many tattoos available to try. My hands are huge (man hands), so little scissors just make me dangerous 😁😁 but it’s a great idea!
Awesome how it turned out
@Luxinda
2 жыл бұрын
Thank you!!
And at least the glow paint shows on camera for You! I can always see it but the camera never can for me!
@Luxinda
2 жыл бұрын
Yeah, it's not easy, and I can't explain what it is that makes it show up better sometimes vs others (I'm very much not technically inclined with photography in general). I just watched your vinyl wrap glow cups video, and I thought both of yours looked so cool when you showed the glow. The first one you wrapped that seemed to show somewhat less glow actually looked like all the buildings in the wrap graphic had lights glowing from the roof tops, like the whole city was on fire - I loved it!!!
An easier way is to tattoo the tattoo onto the clear protective film then flip the protective film over so it's mirrored correctly and THEN add it to the tumbler....maybe .....
@Luxinda
Жыл бұрын
If that works for you, great!😊
Fun tumbler. You made it look easy, I would of made a mess…
@Luxinda
2 жыл бұрын
Thanks! Oh, I did back when I first tried this - it was a hot mess 🙄🤣
Beautiful! I haven’t yet bought the glow spray paint (only because it’s a whopping $9.99 at Walmart), but now I might. Tis the season! And, it shows up white? Hmmm
@Luxinda
2 жыл бұрын
Thanks! Do you mean “shows up white?” in regular light? The glow paint layers on the cup show up as a very subtle off-white indoors. When you start spraying the first glow paint layer on the white painted cup, it will look slightly different from stark white, but it’s subtle and not noticeable on camera at all.
@robinbarnes5104
2 жыл бұрын
@@Luxinda ok thanks. Going to pick some up in the next couple days
Thank you for this video. After watching your first video last year, I wanted to make this cup but never got around to it. I watched your new video and was inspired. I've got the tattoo on the cup which came out great thanks to your instructions. I still have to go around the white edges and then epoxy. My question is, it seemed like you only did one coat of epoxy in the video. If I do more than one coat, will the glow still show through? I just want to make sure my cup is good and sturdy. I'm not selling it, it's just or me.
@Luxinda
2 жыл бұрын
Thanks! I'm glad updating the video was helpful. I tend to show only the one coat in a video because adding another coat won't really change anything so it seems like extra unnecessary video time. But, yes, I do add another coat (or two if you need it to achieve a nice smooth, flat surface) before I sell the cups. And, no, adding more clear resin will definitely not affect the glow or its brightness. Good luck with your cup -- you'll be churning them out in no time 😁
Love ur tumbler, so clever. Quick question, how do you prepare your tumblers for spray paint? Do you coat it on the inner rim first? Or do you clean it up after the project is done and what chemical works best for you? Thanks!
@Luxinda
2 жыл бұрын
Thank you! All I do to prep for spray paint is sand the cup, clean it with alcohol, then start spraying. I don’t coat the tumbler on the inside, although I know some people do or they line the inner rim with tape because they don’t want to clean later, and that’s great! I just figure that I’ll probably end up cleaning the finished cup anyway, so I don’t worry about prevention as much in the beginning. I clean inside the rim with acetone, then wash the whole cup really well with warm water and dish soap so there’s no leftover smell before I package it up.
@lyndeedabular8092
2 жыл бұрын
@@Luxinda thank you!!
Am I the only bothered that you separated Lock, Shock and Barrel? Other then that, great job!!
@Luxinda
Жыл бұрын
I think on the original video I made of this a year earlier, someone expressed dismay. But really, it’s separate or have someone completely covered by overlap because of the taper of the cup. Now that skinny straight (no taper) tumblers are standard, it’s not as much of an issue 😊
I’ve watched this video many times and I’m going to try it…I’m wondering in regards to the maribu rainbow ink…do you think if one used a very small amount it would give a metallic look to a cup? I’m making a tumbler with a beer label for a guy and just looking to give it a metallic look
@Luxinda
2 жыл бұрын
Definitely give the tattoo cup a try! As for the rainbow, I don’t think it will look metallic. Even just a little bit of the rainbow alcohol ink completely disperses through the resin, and the whole cup looks sparkly. I’ve done videos where I mix a metallic marbling mica into a little resin, drizzle that onto a cup, then hit the drizzled resin with a torch flame, and the metallic drizzle sort of puffs apart and makes metallic lacing. That probably makes no sense, but here’s one of the videos: kzread.info/dash/bejne/l22OqrOPncWpo6w.html I don’t know if it’ll help, but I hope it does.
This is so fun! Too bad whoever designed the tattoo didn't notice that Zero's name is backwards. Thanks for sharing!
@Luxinda
2 жыл бұрын
Thanks! Yes, I agree -- If I could somehow change that one thing, I would, but... clearly it's not important enough to the folks producing the tattoos to be worthy of completely revamping their artwork. :(
@SheriPhaffArtPaintBrushed
2 жыл бұрын
@@Luxinda Still looks great anyway!! ;)
are those tumblers for collection or actually drinking cups, is the resin safe? thanks..pretty cup..
@Luxinda
2 жыл бұрын
Thanks! The cups can absolutely be used for drinking -- resin is not inside the tumbler at all, which is double-walled stainless steel, so with the lid and straw, there's no need for the drink or the person drinking to be in contact with the resin. The resin itself is also safe for contact once fully cured, which is about 72 hours (and they aren't shipped until after they are fully cured). On the other hand, I know some folks do also collect them and never use them for drinking. Functional art :) Thank you for your question!
I wanted to do a glitter peek a boo but I wanted the glitter part to glow....do you think this would work spraying it over a coat of epoxy put decal on paint white and remove decal???
@Luxinda
2 жыл бұрын
I am definitely not a peekaboo expert since I've never made one. But If you start by glow painting the cup like I do in this video, then apply a layer of epoxy that has glow powder and ultrafine glitter in it, you'll have a great glow/glitter base layer. Then over top of that, put on all your temporary vinyl, spray paint it white (or any other color) and remove the vinyl. That seems like it would work well. Maybe someone else who does peekaboo tumblers will chime in here.
Hi Is Zeros name on the dog house suppose to be backwards? Just finished my tumbler and noticed it’s backwards, is this correct?
@Luxinda
Жыл бұрын
Yeah, I wouldn’t say it’s supposed to be backwards, but since the creator of the tattoo art didn’t mirror it, that’s how it ends up in all the tattoos, and there’s really nothing you can do about it, unfortunately. 🤷♀️
THANK YOU for sharing but how many layers of glow paint did you use and did you seal it with clear spray before adding the tattoo?
@Luxinda
2 жыл бұрын
That's in the video! But to reiterate: 2 layers matte white followed by 3 layers of glow followed by 2 layers of gloss clear. Then I applied the tattoo. Thanks!
@kokopellicodcs3499
2 жыл бұрын
@@Luxinda thank you where in the video do you say it? I watched IT 2x I'm sorry I missed it both times. Either I'm blind or deaf. SORRY!
@Luxinda
2 жыл бұрын
@@kokopellicodcs3499 No worries - it's happened to me when watching other videos! I just re-watched, and that info is at time marker 2:06 pretty early on in the video. Hope this helps!
@kokopellicodcs3499
2 жыл бұрын
@@Luxinda I missed it 2x UNBELIEVABLE!
I want to try this but I can’t find the 30 oz tumbler with taper. Will it work using one that is not tapered? Thanks for your help.
@Luxinda
2 жыл бұрын
It definitely should work just fine. In fact, you may not have to do as much cutting and piecing of the tattoo with the skinny straight as I did with the tapered cup. AND if you can find a 30-oz thick, then you may not have to do any cutting except the first cut to split the tattoo in half across just above Zero's house, and it may fit even better. Rae over at Rae's Turquoise Turtle did a video with this tattoo and the 30-oz thick, and said it's basically a perfect fit. Here's the link to her video if you haven't seen it: kzread.info/dash/bejne/mXZ4mtWKoNW4qJc.html
@bethrichardsom23
2 жыл бұрын
@@Luxinda thank you so much. I will check out the link. I can’t wait to try this.
can you use this method with acrylic cups/tumblers as well?
@Luxinda
2 жыл бұрын
I don’t see why not - the cup just needs to be painted white, then spray painted glow, then the tattoo applied. If you’re not going to use resin, you can seal the tattoo on with the special Mod Podge that supposedly holds up in dishwashers. amzn.to/3mjkow4
Can the glow in the dark spray work on a black base or only white
@Luxinda
2 жыл бұрын
I haven’t actually tried it so I can’t be 100% certain, but most glow cups you see show the glow only in the light areas of the design, not in the black areas. So my guess is glow paint on a black base won’t look like much at all except maybe a glowy faint shadow. I did put glow powder in resin and drizzle it on a black-painted cup, and you could see where the drizzles were when the cup was in a dark room and charged with a black light. But it was very faint. Video of that if you’re curious: kzread.info/dash/bejne/dol6ttOoqMnKdMY.html
Hahaha, I didn’t cut the label from my Wolf tattoo 🤦🏻♀️thankfully I was able to gently sand it off
@Luxinda
2 жыл бұрын
Yay! Glad it was that easy a fix.
What does Marabu Rainbow alcohol ink do? Can anything else be used to accomplish what this alcohol ink will?
@wtglb
2 жыл бұрын
Rainbow Ink is AMAZING!
@Luxinda
2 жыл бұрын
Rainbow alcohol ink adds superfine rainbow color-shifting sparkles to the resin. I haven't found anything else that works quite the same, but there are a number of super-fine "glitter additives" out there (pretty much every glitter company carries one now) that are available to add in to your resin for extra sparkle.
Great job! Do you know what's up with the sticker makerflo puts on the bottom of their tumbler? I asked them, but they never replied. I guess they're too ashamed of being so cheap.
@Luxinda
2 жыл бұрын
Thank you! Not sure, I know there’s one on the Stainless Depot tumblers, and I just take it off. I’m not aware of one on the bottom of MakerFlo tumblers. But they aren’t necessary, just cosmetic.
@MileyonDisney
2 жыл бұрын
@@Luxinda Thanks!
I don't see this one in your shop. Is there a way to order it?
@Luxinda
2 жыл бұрын
Thanks! I just sent you a link through Etsy.
Would you have to cut out the characters for a straight tumbler?
@Luxinda
2 жыл бұрын
Very good question! I have not tried a 30 straight yet. I’m guessing the cutting would be slightly different but might still need to happen. I hope to do that video soon. I do know that with a 30-oz thick, no side cutting is necessary at all, so that would be the easiest cup to use if you have it and the customers are ok with the size. I don’t think 30 thicks fit in any car cup holders, but then again, not everyone takes their tumblers in a car…
How much marabu rainbow ink do you put in your resin?
@Luxinda
2 жыл бұрын
Basically, I add a 'healthy squirt' -- that's really all I can say in terms of measuring anything. In the beginning, I would suggest adding a few drops, stirring it in, and seeing how you like the way that looks, then add more next time until you're happy with the overall added sparkle.
Help please I used your video,it worked great but it put it up sidedown grrr is that too bad ?my second problem is when I put the last coat over the glow coat by mistake I used the white, not the clear. Are these things I can fix? Help, mary ann
@Luxinda
Жыл бұрын
Well, in regards to the spray paint problem, the easiest fix would be to spray more layers of glow paint over the accidental white paint, then finish with the clear. As for the first problem, if you put the entire tattoo on upside down, there really isn’t a fix for that. You will need to repaint the cup as though you’re just starting, with all the different layers, then apply a second tattoo right side up. I’m sorry I can’t help more than that. Tattoos are notoriously fragile. You might be able to lift and reposition a waterslide, but definitely not a tattoo. 🙁
@Cabochons
Жыл бұрын
@@Luxinda ty very much. I was afraid of that. I'm glad I can fix the paint problem. The upside down cup will now be a Christmas present to my granddaughter lol she won't mind too much
I'm having issues where it shows cracks after it has dried. Any recommendations? Thank you
@Luxinda
9 ай бұрын
Yes, unfortunately that can be an issue. After a lot of trial and error, I have had the best results being able to avoid or significantly minimize cracking by being pretty quick about the entire process. I used to let the cup dry overnight after applying the tattoo, to make sure there’s no moisture at all before applying resin. But that amount of time, especially in colder, drier air, can lead to cracking. Another thing I used to do was spray the tattood cup with matte clear spray to seal it before resin. However, I think since matte spray paint dries much faster than glossy spray paint, the actual drying of the matte clear is adding to the possible cracking problem. So now I apply the tattoo, leave it to dry for just a couple hours, then apply resin. If you still want to seal the tattoo before resin, just to protect the tattoo image, then use a semi-gloss or even a gloss clear spray paint, then apply the resin as soon as the paint is dry. I can’t guarantee this will magically fix the cracking all the time, but it should definitely help reduce most of the cracks.
@kamifloyd6849
9 ай бұрын
Thank you very much. I was using the matte clear spray.
What can we use other than resin? I'd love to make this but don't want to work with resin.
@Luxinda
Жыл бұрын
The most common alternative to resin is Brite Tone, which also has to be applied in multiple layers, but is considered non-toxic. Something like a spray or even brush-on varnish won’t provide enough protection.
@elizabethcamachov.3613
Жыл бұрын
Thank you so much!
Is that sublimation or water slide ?
@Luxinda
Жыл бұрын
It’s a full-sleeve temporary tattoo.
I just made this and it just caught my eye that Zero's name is backwards.
@Luxinda
Жыл бұрын
Yes, the company that produced the tattoos didn’t realize the art needed to be reversed before printing. 🤷♀️
@mistycolian534
Жыл бұрын
Lol it's OK. My daughter still loves it.
Can you use any kind of resin
@Luxinda
2 жыл бұрын
Pretty much, anything except a deep casting resin. But any art resin would probably work fine.
Have you ever had the tattoo crack when you put the resin on?
@Luxinda
2 жыл бұрын
Not exactly. I’ve had the jack o’ lantern on the bottom tear completely one time when I put resin on it - that was a mess! And I’ve had a few tattoos crack a lot after I sprayed on the Rustoleum matte clear spray, and I’ve never figured out why it happened. But I haven’t had the main tattoos all around the sides of the cup crack when I applied resin.
@evelynconde4902
2 жыл бұрын
Thank you for the reply! Love your videos!
And Amazon. I would like to try. I'm new
@Luxinda
Жыл бұрын
Do you mean the temporary tattoos? That link is amzn.to/3pcn8xc
@Cabochons
Жыл бұрын
@@Luxinda ty
Hi can I get a link for the cups
@Luxinda
Жыл бұрын
Sure! It looks like MakerFlo isn’t selling these anymore, but The Stainless Depot is: bit.ly/3bObXI6
Where do you get the tattoos? Thank you
@Luxinda
2 жыл бұрын
Here’s a link: amzn.to/3m81sSI
@joannerodriguez5190
2 жыл бұрын
Thank you
@fawnnelson3369
2 жыл бұрын
@@Luxinda I looked at the tattoos and I'm confused. It says 12 count, pack of 1. So do you receive 12 of the total tattoo you used?
@Luxinda
2 жыл бұрын
@@fawnnelson3369 , yes, the link I provided is for a package of 12 of all the same Nightmare Before Christmas tattoos. I don’t know if you can buy just a single one, but if you look around Amazon, you can find packages of tattoos that include just one of these plus other different designs.