I love to hear a nitro ENGINE RELINE FOR SO LONG!!!!!!!

What temp you hitting at end of tank. You like to tune lean ❤ so do i 😂 all mine hit 300*+ at the end

@NicholsonNitroWorks

21 күн бұрын

It gets super hot way over 300. I know its hard on the engine but its an old engine and its still running strong . I have to run it lean to get the engine to rev up with the super tall gearing. It is really just getting to hot and I need to let it cool off. I have only run the car twice so I still have to get it right. Its an rp7 plug for on road engines. So I have sort of a mismatch, Im doing on road things with a .28 off road engine. Im going to try an or road engine see if it works just as well with a smaller higher revving unit.

@Nitro_rc_life

21 күн бұрын

@NicholsonNitroWorks Itdoesnt sounds to lean people trip out over temps most say 250* I think 300* is the sweet spot for most engines. Plastic doesn't melt til 400* and that's why I laugh at some and congratulation to people like you that aren't afraid to show the engines Tru power 💪good work

@NicholsonNitroWorks

21 күн бұрын

@@Nitro_rc_life Thank you! If you look at top fuel dragsters and outlaw cars and see the power they make. There is no reason our engines cant do the same. No companies have ever researched into making a higher revving larger sized nitro engine do to popular demands. If you double the size and engineer the engine to perform like the .21 competition engines they would make the same power as other vehicles. In the meantime I modify these existing engines to turn higher which in turn makes more power. If I can get the largest RC engine to turn the same RPM as the on road engines I'm making more power which is needed to get my wheel speed up to a goal of 75mph to drift the way I desire to do with all four tires blazing in smoke at 45,000 engine rpm for minutes straight at a time! Then I just fill up the tank and go again. The cooling is the issue with more power also. So some breaks in fun will be needed to let it cool off.

@Nitro_rc_life

21 күн бұрын

@NicholsonNitroWorks balancing the crank will yield the best results in my opinion. Even at 10% oil it's way too much but needed ive been wanting to make my own fuel. Torco has been great.

@NicholsonNitroWorks

21 күн бұрын

@@Nitro_rc_life 6% oil is enough. Roughly two ounces in a 32 ounce bottle. Your will achieve higher horsepower at the cost of some engine wear or possible failure.