You can find Kimberly's custom CNC carbon fiber parts below 🤗. My Outcast 6s has officially gone on a diet. Lost about 60 grams of weight with her parts. 😎💪👊👊 www.ebay.com/str/basherqueen

@danielnoname8352

3 жыл бұрын

Hi Rich, correct me if I am wrong but looks like it is not worth to replace that parts if You already have M2C parts? I checked the price and they are not cheap and additionally it is only 60 grams for the whole car. I believe that You collect more weight from rocks and sand during driving 😁 In that case the only significant factor is the durability, I can't wait for Your thoughts about what is better, M2C or Basherqueen

@Basherqueen

3 жыл бұрын

@@danielnoname8352 Hi Daniel! Rich upgraded the Anniversary Outcast with had the standard Aluminum Towers. My Carbon Fiber Towers are definitely stronger then the stock once or Towers from 6061 Aluminum (HR, GPM etc.) . For sure the 9mm 7075 Towers from M2C are stronger then mine 5mm Carbon Fiber once, no question. I make the parts for me and the community in my little workshop/office for better durability and better look (who likes it). Over all weight reduction is always a plus because it takes stress from all other components. The price comes from really high quality Carbon Fiber (no cheap CN s***) and that fact that I make them in only small quantity. Thanks for stopping by my eBay Shop and Happy Bashing!

@GRIFFINLEVEL3

3 жыл бұрын

Rich, Great bash session. Thanks for sharing and those parts are awesome looking. Kimberly is making a great product and I’ll be sure to pick up some “bits and bobs” (as Talbot might say) Carbon isn’t cheap and her pricing is very fair. I was actually expecting the pricing to be a bit higher. I just M2C’d my Notorious, but need a few parts for my EXB. Looking forward to more videos from you, and bits from Kimberly.

@Basherqueen

3 жыл бұрын

@@GRIFFINLEVEL3 Hey Jason, you are very welcome to to by my Shop! 👍

@danielnoname8352

3 жыл бұрын

@@Basherqueen hi Kimberly, please do not understand me wrong, I am not complaining about Your parts, I appreciate people like You as I think that such quality of aftermarket parts is one of the best thing in this hobby - thanks to this, sky is the limit 😁 I am sure that Your parts are no comparable to the stock ones, it is probably a totally different level of materials and engineering. I just was wondering if it is worth to buy it if the car is already 'bullet proof' because I was expecting hundrets grams less, rather than tens. I have no knowledge about materials and for the layman carbon fiber is associated with the exceptionally light stuff. That's why 😂

Kimberly's parts are epic, definitely premium quality. Took a beating too!!

@Basherqueen

3 жыл бұрын

Thanks Kev, means a lot too me! 😘 to you UK guys!

@richduperbash2966

3 жыл бұрын

No doubt Kevin 🤗. I'm super impressed 👀. Kimberly leads by example with quality and obvious passion for what she does 😍

@harriskids7312

3 жыл бұрын

love your channel Kev can you do a video on the new 3s blx senton

Wow, my parts in your hands and they are not only beautiful, they also can take you extreme bashing style 👍 Thank you so much for the support of my One-Girl manufacturing in USA. One proof more that you can get innovative and affordable stuff domestic 👍 Epic action and great filming as always 😘😘😘 to the Basher-King !

@rcpitlane2283

3 жыл бұрын

Great Products! Will we se some Carbon Fiber for the Mojave too?

@richduperbash2966

3 жыл бұрын

Thanks so much for the opportunity Kimberly 😍. Perfect fit and finish and attention to detail 👌. I think they're a great option, especially for anyone wanting to shed grams. Love the glove like fit of the towers and the precision fit of the top brace 👀. I'm super impressed with both your innovative work and dedication 🥰🥰. Like I've said many times, we're all very lucky to have you in the hobby 😘😘😘😎💪👊👊

@Basherqueen

3 жыл бұрын

@@rcpitlane2283 Yes, I am working on them too.

@derekquinones8614

3 жыл бұрын

Are you only selling stuff on eBay?

@Basherqueen

3 жыл бұрын

@@derekquinones8614 So far I use eBay only. What do you need?

If anyone knows her parts it’s Kimberley! 🔥

@Basherqueen

3 жыл бұрын

Thank you Claire for all the love and support! 😘 to the UK guys!

EPIC bench and test vid Brother Rich!!👊 Basher Sis Kimberley is killin it with the Carbon Fiber parts!!😱Amazed that they took the roof hit!💪💪A light rig does make a difference in durability too as the impacts aren't as brutal on stock and upgraded parts! Why I love the Losi 8ight so much!😍You can tell by the handling and landings, the truck is light on her feet! I wonder if a slightly thinner shock oil or lighter springs would make a difference now..🤔Total kickass bash at the construction site bro! Epic from start to finish!😱🚀💪💪🤘👊👊

@richduperbash2966

3 жыл бұрын

Thanks so much Brother Eric 😜. Kimberly did a great job with the parts. Absolutely perfect fit and M4 holes where it counts 👍. Super impressed they took that roof lander. I gotta tighten that power switch up. She's definitely a light and agile little Ripper. Not the best for a rough construction site, but she did good 🤗. The shocks feel pretty good, but I'll probably swap on the ZRS setup to keep her more planted. Really appreciate it Brother. 🍻🤙🤙😎💪👊👊

"A gentle break-in bash" 😂 that's funny. your gentle is my extreme. 👍🏼✌🏼

Awesome video man i always look forward to seeing your new videos bro thanks

That Outcast is insane... Looks and sounds more aggressive than a regular Outcast. Those basherqueen carbon fiber towers look amazing. Keep on bashing Rich and stay safe Brotha.

@richduperbash2966

3 жыл бұрын

Thanks so much Rey 🤗. This lighter Outcast is a Blast 😍. Takes a bit more focus to bash because it's faster and noticably more agile. I'm truly impressed with the Basherqueen parts 👀. Great option for a lighter set-up 🍻😎💪👊👊

Awesome run brother!! So pleasing to watch!! Cant wait for more videos! Stay safe out there brother.

Thank you for posting videos it helped me see what to say but for

Awesome beatdown on the ultralight Outcast setup Rich. No Spappage! Looks like Basherqueen CF parts got a Duperbash Certified! Even survived smackdown hit on the construction equipment and hard roof landing LOL 😱🤣. Well done Rich! Can definitely tell and feel it's lightweight profile She just flip on a flick. Wicked Sends off the off the ramp and Hills. Another killer session brother. Good to see the anniversary edition Outcast out again. Stay safe and bash on brother.

@richduperbash2966

3 жыл бұрын

Thanks so much Brother Chris 😜!!!! I noticed awhile back how agile this sucker was with the Speed chassis and Backflip LP's 🥰. Feels ultra precise at the skatepark. Kimberly's CF parts add to that agility 👌. This rig is a hyper Ripper no doubt. Very challenging to keep the nose down 😂. Especially on the street once the LP's stick. I'm super impressed the towers took the abuse 👀. That same type of hit destroyed my Tekno MT410 CF towers 💩🤣🤣. Really appreciate the kind words as always Bro. Looking forward to more Killer footage with your new ramp 😱🤙🤙😎💪👊👊

Awesome bash as always ! I love the "gonna go for a quick run" and... staying until the sun goes down, trying to bash it to breakage 🤣. Next step : the rock of death. Also shoutouts to Kimberly. Awesome carbon parts made with such love for a job well done.

@richduperbash2966

3 жыл бұрын

Thanks so much Brother 😜!!!! Quick run got extended a little bit 😂. I gotta say, just haven't been getting the bash time and stress relief I need lately. Felt awesome to use up the sunlight 😍. Going home with no breakages is always a plus 🤗👍👍😎💪👊👊

Sweet bash as always! I have been contemplating adding a 6s outcast or notorious to my collection for a while now. I have been trying really hard not to buy another rc before spring..The struggle is real, especially after watching your video. Thanks for all your great videos. You and other RC youtubers have inspired me to start creating my own videos and it's a lot of fun! Thanks!

Kimberly is awesome ; very smart designer. Rich, that outcast body is really cool looking. Great bash session as always. Send it brother !!!

Brother Rich I was giggling when you said you were going to take it easy but I didn't believe you why because you're name after Rich is DUBERBASH!! Those were breathtaking High super jumps and 1 pound lighter it's like a loaf of bread that is 16 oz that Outkast is a super lightweight champion now ! all hail to the Basher Queen For her carbon fiber arrma parts😉🤘👊🤙👍👍

Man I love your videos, that Outcast looks insane!! Those jumps are getting ridiculous now 😂😎😎👍. Take care bro ❤️ from the UK.

Third time watching this over the last year and knew to look back one more time before I go pick up those beastly yet beautiful CF parts without a doubt! That power cut and the cement structure thing did jump out of nowhere though fore sure. Stuff is really that tough it's amazing... great clip/session brother as always thank you

@richduperbash2966

2 жыл бұрын

Thanks so much Chris 🤗. Kimberly uses the highest grade CF available. I broke Teknos CF towers very easily 😝. Designs plays a huge role with strength, but material is absolutely key.

Love the low light bashing. Spectacular sends. That’s a pretty awesome video as always. Really cool to test out that setup. Weight is everything on almost every platform in the rc world. Cheers to Kimberly!

@richduperbash2966

3 жыл бұрын

Thanks so much Brother 😜!!!! I'm glad the video came out ok with the sun setting 👀. Sometimes the GoPro blacks out in low light situations. You're absolutely right about weight Bro 👊. Grams make a huge difference with every RC. Really appreciate your comment my friend. 🍻🤙🤙😎💪👊👊

I just ordered that max 6 esc plate😃🤙 thanx for showing me her stuff. Always enjoy your vid brother 😉👊

@Basherqueen

3 жыл бұрын

Hey you! Thank you so much! 👍

yesss, been waiting for this video! I love Kimberly’s products! They are beautiful! I ❤️ me some carbon fiber... 👀The 10th ani outcast turned out gorgeousness! Bash on brother Rich!

@richduperbash2966

3 жыл бұрын

Thanks so much for the warm comment Brother 🤗. Kimberly is taking the CF options by storm 😱. Hats off to out lovely 100% unofficial Basherqueen 🥰🥰😎💪👊👊

That was SuperFantastic @Rich Duperbash Rich getting so used to flying into hard objects he just says "Ooohhh..." and does not even check the rig, gangster just drives away 😳😜😂🤣 Dude your crazy.... Love this lightweight rig... Great options with the Arrma/Basherqueen/M2C build... Love it brother.... Killer skills and stalls, delayed flips and some HUGE sends as always brother KilT it!

@richduperbash2966

3 жыл бұрын

Thanks so much Brother Dennis 🤗. Had a Blast despite the strong headwinds blowing this lightened setup around 🤣. I wanted to shape up the mounds, but had to go gangsta with security eyeballing me at the construction site. Just glad they didn't boot my ass outta there😂. It's Crazy but I didn't break a dang think besides stripping my original rear body mounts. PS, I finally covered up the Death Rock 😱 and cut down those bushes I kept crashing into after the Mega gap 😝. I took another hard look at that boulder. It's shaped about perfect for maximum carnage 👀. Hope e is well Bro. Appreciate the kind words as always. 🍻🤙🤙😎💪👊👊

Wow Rich, super content!! I'm quite surprised the carbon towers took that roof landing 😮. That build is definately something different, I like it alot, I hope to see that Outcast again soon!! Great job again 👍👌

@richduperbash2966

3 жыл бұрын

Thanks so much Brother 👊!!!! I'm very impressed with the durability of these CF parts 👀. It was a pleasure fitting them up. Kimberly was very precise with the design and fitment 😍. Appreciate the kind words. 🍻😎💪👊👊

Like Always Amazing Bash Sesion.And Yes Carbon Fiber Parts Took A Beatdown And Survived.Great Build.That Thing Is A Beast!!.

@richduperbash2966

3 жыл бұрын

Thanks so much Javier 🤗. Really appreciate it Brother. 😎💪👊👊

Love your version of a gentle break in bash 😂 looks like Kimberly dose some nice hardware. Awesome as always dude.

@richduperbash2966

3 жыл бұрын

Thanks so much Lucas 😊. Kimberly does awesome work 👀. She uses top grade CF no question. 😎💪👊👊

The CF looks great. Really took a beating aswell, that landing into the Pipe n Pallets @ 6.50 & the roof landing was brutal too. No shelf queen for your Anniversary edition Outcast Rich 💪 👊 Epic Vid

@richduperbash2966

3 жыл бұрын

Thanks so much Jason 🤗. Kimberly did a wonderful job with these upgrades 👀. Things got rough and the parts hung tough 💪. They feel right at home on the Limited Edition. Much appreciated Brother. 🍻😎💪👊👊

Basherqueen all the way. Great stuff!

What a bash brother🤘🤘👊👊 You beat the snot out that Outcast and it just came back for more. BasherQueen's parts truly held up to the test 💪💪👍👍🔥🔥

Awesome vid, nice chassis great carbon parts from Basher Queen

@richduperbash2966

3 жыл бұрын

Thanks so much Justin 😊. I'm still shocked about this lightened Speed chassis 👀. Only 280 grams. The Basherqueen CF seems legit. 🍻😎💪👊👊

Super great rig Brother ty U 4 sharing

Awesome session! thanks for the video. your breakin bash is harder than my regular bash😀

Nice truck,definitely a drop in weight,,gotta say the more I watch your videos the more I'm getting to the basher side of the hobby,appreciate all the videos, keep em rollin'

As normal, killer video dear brother 🥰, love the OC, such a classic genre 🤗. The parts from Kimberly looking great ❤❤❤

@richduperbash2966

3 жыл бұрын

Thanks so much dear Brother 😍. The Outcast will never get old 🥰🥰🥰. The Basherqueen parts are holding up great 👀. Hope all is well my good friend 🤗👍👍😎💪👊👊

@TpPartsRcXtreme

3 жыл бұрын

@@richduperbash2966 yes my dear friend, all good..the cold are saaaweeping in over sweden..try to bash today 🥰

Killer video , I am back at it after having to sell my entire collection awhile back ive bought a new x maxx last week.

Hi Rich, you’re videos are amazing, i love how you frame your shots to make the backgrounds epic , those jumps are just too, the moon 🌙. How high is a China 🇨🇳 man lol , that’s an old joke my old man told me. But seriously 😳 how high do you think you’re rc’s jump, I know it’s really high. Awesome video Rich, and they were amazing parts. I think if you fitted a pair of wings to your rc, it would definitely fly. 😎👍👍👍🇬🇧

@richduperbash2966

3 жыл бұрын

Thanks so much Mike 🤗. The new parts did great 👍. I'm not sure on total height, but they get pretty far up depending on speed and what the wind is doing 😱. I was jumping into the wind for most of those gap jumps at the end. It has a major impact on both height and distance you can achieve. 🍻😎💪👊👊

The King of the SKY ✈✈✈✈✈✈ what servo is that looks black not red 😂😂😂😂😂😂 is all good Bro Excellent video DUPER 😎 👊 👍 ✌ 👍 😎

Awesome experiment Rich! The lightened Outcast looks amazing!! One of a kind for sure 👌👌 That roof landing was crazy bad😱😱 If the CF parts can take that then these will hold up for most 👍 I might need some basher queen parts for my Typhon and make a lightweight version 👍 I like to keep it 4s anyway!

@richduperbash2966

3 жыл бұрын

Thanks so much Brother Aaron 😜!!!! I could take it further with lighter RPM arms and Mitch's prototype driveshafts 😱. The shafts are literally feather light compared to stock. He's altering the design of them at the moment. Just waiting to see the final test batch. Kimberly's parts fit perfectly 👌. Super impressed thus far. Might not have the ultimate strength of beefy 7075, but they can flex without losing form and passed a pretty hard durability test 👍👍😎💪👊👊

the backwards-flight at 8:10 was another great one....I love that style of flying

@richduperbash2966

3 жыл бұрын

Thanks Brother 👊. Happy bashing!!!! 🍻😎💪👊👊

Parts are sick! I wish I could find a place in la to bash like that.

Awesome parts n sick bash brotha!

@richduperbash2966

3 жыл бұрын

Thanks so much Stevo 😜!!!! Hope all is well Brother 🍻😎💪👊👊

like you i use backflip lp 4S on my outcast and they are awesome! great parts from kimberly !

Super awesome of her.way to Kimberly what a great product. They look fantastic and held up great.some trully epic insane sends man.good to see the limited edition out again. It seems like a great light weight mix made in heaven of carbon fiber ane the light weight m2c chassis.it all took the roof landing great. I wonder if making a carbon fiber wing mount is possible because that would be the ticket i bet. Super wild and great bash video man. Stay safe i havent heard alot about the fires as of late i hope they are going away if not gone. 🍻

@Basherqueen

3 жыл бұрын

Hey Nick, so far no plans to make a wing mount. I use the RPM Wing mount and haven't broken one yet.

The carbon fiber bits look like they are doing well.keep up the great content basher queen and M2c seem to be the best upgrade parts

@richduperbash2966

2 жыл бұрын

Hey Jim 🤗. Kimberly's parts have absolutely perfect fitment, made from top shelf CF 👍. Extremely durable no question. Between Basherqueen and M2C you're left with a very durable rig. Really as good as it gets for bashing. Hope all is well Brother 🍻😎💪👊👊

That low fast flip at 202 was nuts!!!!

After all, the best upgrade is weight loss😎. Light and fast bashing with a weight of 60 grams.👍 Really too cool Rich👊😎👍

Very very Nice job rich 👍😎, really good carbon fiber upgrades, great endurance test, i think if the towers didn't break when it went off in the air, it means they are sturdy 💪💪, I also saw your feet very close in certain shots 😂😂, nice video my friend 😀🤝

@richduperbash2966

3 жыл бұрын

Thanks so much David 🤗. Yes indeed, Kimberly's parts are quality 😍. Very impressed with them Brother. You know I have to get close to stay focused 😂🍻👍👍😎💪👊👊

Good stuff brother 💪🏾💯

Same truck I got fully outfitted in gpm parts. Solid center diff 10th ann also. Sick truck and is fun with my exb ive tricked out also.

That thing looks toey AF dude!! That was a GNARLY rood landing!!

@richduperbash2966

3 жыл бұрын

Thanks so much Brother Ed 😜!!!! Not gonna lie, this lighter set-up is super touchy 😱. Pretty challenging to get the nose level for landings. That roof hit was indeed harsh 🤣. I forgot this switch has shut off before on landings. Never on a takeoff before though 😝🍻😎💪👊👊

@easternrc1924

3 жыл бұрын

Might be worth showing positive and negative and wiring together? Keep the set switch that way

That’s a sweet body color! Great job! Believe it or not, this has been my most troublesome car to get running right. Break ever run, keep upgrading. Eventually it will be good?! Lol

I wish I could get into bashing but I'm just a slow crawler guy lol, I just dropped 3k on crawlers and parts and I was just thinking I could have at least got 1 basher 🤣. I did pick up a 16th scale slash today not really a basher but by far my fastest RC. I've been watching you for a couple years now and I live my bashing through you 👊👊.

@richduperbash2966

3 жыл бұрын

Thanks Brother 🤗. My buddies have been trying to get me into crawling for years 👍. Looks like a Blast. Definitely gonna have to try it sometime. Really appreciate it my friend. 🍻😎💪👊👊

Nice video rich. Looks super impressive for the build quality and durability. Also, are you going to get any of the new Arrma 3S rigs ?

@richduperbash2966

3 жыл бұрын

Thanks Brother 🤗. Yes....I'm interested in the new 3s rigs. Just a matter of time I think. 🍻😎💪👊👊

Rich you always know how to make my paychecks disappear. Looks like I'll be ordering some goodies!

@Basherqueen

3 жыл бұрын

Awesome! Thank you! 👍

another great bash vids👍👍 how do u prevent by strip those wheels hex hub🤦‍♂️🤦‍♂️

Cool video i just bought the new notorious whats the difference of the stock tires vs backflip lp you have ?

Awesome bash brother! I hope she makes some stuff for the Limitless and Infraction.

@Basherqueen

3 жыл бұрын

Hey you! Yes, I make the whole set for the Limitless and Infraction. kzread.info/dash/bejne/d6CjxKOMgsjTn8Y.html

@KaizerTest

3 жыл бұрын

@@Basherqueen Good stuff Kimberly. I really like the carbon fiber shock towers, ackerman plate and servo plate. Keep up the good work.

Your a great driver!!!

Nice!! She is badass!! I CA glue the fiber edges..Seems to help

@richduperbash2966

3 жыл бұрын

Thanks so much Brother 👊. I've heard it does help. Much appreciated 🍻😎💪👊👊

@philthyco1

3 жыл бұрын

@@richduperbash2966 Old school late 80's early 90's trick lol

Great video as always. So could ya tell the difference with the 1 less pound gone? I been thinking about what to do with the notorious maybe basher queens. The kraton is all m2ç beef cake💪💪💪💪.. looking forward to the next one. Stay safe 🤙🤙🤙

@richduperbash2966

3 жыл бұрын

Thanks Jordan 🤗. You can definitely feel the weight difference. The rig is far more agile and responsive👍. Definitely takes getting used to, but super fast and fun. My other rigs are M2C beefed out too 💪. It's great to have options at the end of the day. Kimberly explained it well in her comment and replies 🍻😎💪👊👊

Bash on Rich!

Hey man that’s so cool

Shout out to M2C Racing!

Is there any chance you have or could do a video on how to drive like you do?

Hey Rich awesome bash! Wish I had some spots like that in my neighborhood. I wanted to ask you a question. I just got the Goliath series M2c chassis for my 6s outcast and after my first bash I noticed it had a slight inward bow about the thickness of a credit card in the center. I forgot to check the straightness of the chassis before I took it out so I’m not sure if the bow is normal from M2c or if it happened from jumping it. I wasn’t jumping it very big probably 10 feet high and flat Landings on grass. I was wondering if you have this same issue on your trucks. Thanks again!

@richduperbash2966

3 жыл бұрын

Thanks so much Christopher 🤗. I wouldn't sweat it one bit Brother 👍. Like Mitch has mentioned, it's not uncommon for the press to slightly bend a chassis during production. While not impossible to bend one bashing, it's very uncommon, especially if running proper bracing and keeping your hardware snugged down. It's normal to have some healthy slight flex too. It helps with handling and absorbing impacts. Aside from tagging a solid object full speed (curb, pole...etc) you can expect the chassis to take brutal bashing and just keep going. 🍻😎💪👊👊

@christopheralan6474

3 жыл бұрын

@@richduperbash2966 thanks Rich that makes me feel better about it. I was using the gpm center braces but just purchased some M2c ones. So the truck should be pretty solid. Thanks again for your wisdom and responding to comments, it is very helpful 🙏🏼👍🏼✌🏻

@richduperbash2966

3 жыл бұрын

@@christopheralan6474 you bet Brother 👊. Happy bashing 🍻

So...that was a “light” bashing!? Hahaha! Fun to watch.

Hey Rich! Can I ask what batteries you use in your Kraton 6s? I have a similar setup, max6 and the 4092 1650kv and my packs are swelling up and getting too hot man! I've tried HRB 6.0 and Nanotech 5.0 which is 70-150c ? They obviously aren't good basher batteries? I'd appreciate your help dude 👍🤘🤘🤘

@richduperbash2966

3 жыл бұрын

I use mostly Hobbystar 5000mah 100c 6s single hardpacks with EC5 connectors. I'd also check to see if you're connectors or wires are getting Crazy hot 🤔. A bad solder connection can put a major strain on the system. 🍻😎💪👊👊

2 thumbs up! May I know what pinion were u using there? That outcast is super fast with only stock blx system

@richduperbash2966

3 жыл бұрын

Thanks so much Ian 🤗. I run an 18T with the smaller Backflip LP's. 🍻😎💪👊👊

@ianbudgetrc2574

3 жыл бұрын

@@richduperbash2966 thank you. So impressed with the stock blx system on 6s

@richduperbash2966

3 жыл бұрын

@@ianbudgetrc2574 I'm very impressed with it too Brother 🤗

Nice rip brother!

@richduperbash2966

3 жыл бұрын

Thanks Brother 🤗😎💪👊👊

You got check out the new carbon exb chassis from hotdogcostoms brother its amazing

@richduperbash2966

3 жыл бұрын

I've seen it. Bummer the price is so astronomical 👀. Guessing it'll come down once there's enough competition in the marketplace. 😎💪👊👊

So if you had to pick between this (Outkast 6s), the Losi XT-E and your Talion, you can only have 1. Which is it going to be? :)

@richduperbash2966

3 жыл бұрын

I would pick the Talion personally 🤗. The XT-E for racing no question. The Outcast is MAD fun, but the Talion simply Rips 👀. 🍻 😎💪👊👊

Hey Rich, how much does the M2C chassis weight? I would like to compare with my carbon fiber chassis.

@richduperbash2966

2 жыл бұрын

The M2C chassis adds around 100g over the stock chassis. Obviously CF is far lighter than 7075 and extremely resilient when high grade. Low sprung weight can be desirable depending on terrain and driving style though. 🍻😎💪👊👊

My experience with carbon fiber is cracking and tearing. But, maybe she has it thick enough to where it’s a beast. Let us know if this is the case Thanks!

@Basherqueen

3 жыл бұрын

Hi Speedy. Carbon Fiber and Carbon Fiber are nor the same. My stuff is made from industrial grade Carbon Fiber made in Japan. Good stuff!

@SpeedSyko

3 жыл бұрын

Kimberly Sanches that’s cool! Good to know! Thank you!

What diffs do you run? I.E. exb style lsd or just stock diffs with heavier fluid?

@richduperbash2966

Жыл бұрын

I run stock diffs with Mugen Seiki shims. Also add Tekno #1222 shims on the crown gear side bearing. Running 50/200/20k front to rear diff fluids.

What's good Rich!! Hope you're having a great day Brother!

@richduperbash2966

3 жыл бұрын

I was fighting a horrible migraine when I posted this vid 😝. Really appreciate it though Brother. Feeling better today. Bash on my friend 🍻😎💪👊👊

Do they still make those chassis I couldn’t find it what’s it under or called? Has this thing still held up depths carbon fiber?

@richduperbash2966

3 жыл бұрын

Hey Carlos 👊. The Basherqueen carbon fiber parts have done excellent 👍. No breakages despite some very hard dirt and skatepark bashes. Still running the Lightened M2C speed chassis. Only weighs 280g and is hanging tough. Not as strong as a Goliath Series 4mm, but stronger and lighter than stock. I'll try and link you. 😎💪👊👊m2cracing.net/arrma-on-road-234-model/459-m2c-3221-arrma-outcastnotoriuos-speed-chassis.html

I've been thinking about buying all the basherqueen parts for my kraton. On a scale of 1-10 how durable would you say they are?

@richduperbash2966

3 жыл бұрын

Not sure on a number rating, but I've yet to bust any Basherqueen parts. I'd say they're very durable. Kimberly uses only high grade CF. 🍻😎💪👊👊kzread.info/dash/bejne/e2GrurWyqs68Yco.html

It looks like the Road Runner Cartoon that has the zoomies!😂

Beautiful truck!! 🔥🔥 Súper Hot Video

Hey Rich what diff fluid weight do u run in your typhon basher ? I'm making my Tekno EB48.3 into a basher and need to change the diff weights , running 6s

@richduperbash2966

3 жыл бұрын

I'm still running 50/200/50K front to rear 👍. 100k center works well too. The eb48.3 is so light, might try 100k first 🤔🍻😎💪👊👊

@midwestboss8808

3 жыл бұрын

@@richduperbash2966 I agree. Keep it quick and still take some long bash runs without burning center diff , thanks 👍

@midwestboss8808

3 жыл бұрын

@@richduperbash2966 glad ur doing good Rich. Ur a solid dude, I remember when we u used to help me years ago. Awesome to see how much ur channel has grown and u deserve it 👏, thanks again 😊

@richduperbash2966

3 жыл бұрын

@@midwestboss8808 thanks Brother 🤗. Just doing my thing having fun with the hobby 🍻

Are you gonna get one of the new Mojave EXBs?

@richduperbash2966

3 жыл бұрын

Probably not 🤔. Nothing against the truck, just not super interested in the platform. Most people love their Mojave's though 🍻😎💪👊👊

Wow man can drive

Does she do any parts for the traxxas maxx?

@richduperbash2966

3 жыл бұрын

I don't think so, but Kimberly would likely consider any suggestions 👍. She's open minded and very skilled. 😎💪👊👊

What model t-bone bumper is that? Typhon?

@richduperbash2966

3 жыл бұрын

Yep 👍. It's the Typhon Basher 6s model. I run them on basically all my 6s rigs. 🍻😎💪👊👊

What 6s lipo are you using in this?

@richduperbash2966

3 жыл бұрын

I was using a Hobbystar 5000mah 100C 6s single hardpack from RCJuice. 🍻😎💪👊👊

I love your videos, and I need you to post more videos. Please

@richduperbash2966

3 жыл бұрын

Thanks so much Brother 🤗. I'm really hoping my RC time will free up more soon. Have some family commitments and home projects going on. Really appreciate it. 😎💪👊👊

@TheHammer8

3 жыл бұрын

@@richduperbash2966 I have a KZread channel that I am starting to post on I wanted to make it on my Armor Typhoon buggy 3S but it is broken so I’m taking it to a hobby shop to get it fixed they have the parts for it I do not

@TheHammer8

3 жыл бұрын

My KZread name is skater noob 25

If I did that once as my E-Revo 2.0 with be in a million pieces. Hahahh

How the carbon fiber holding up?? update? thx

@richduperbash2966

3 жыл бұрын

It's done absolutely Killer. No chipping, cracking, or lamination issues. Kimberly uses premium grade CF. I'm super impressed. 😎💪👊👊

@EastTactics

3 жыл бұрын

@@richduperbash2966 Nice! Ya I picked up a set bout a month ago for my backups when my current towers (Just bash it Rc) tap out on me. Happy to hear they are still duperbash approved. Luv u brother!!!

Carbon fiber is cool but I can't imagine that you saved enough weight to make much difference. I'm guessing a total weight reduction of maybe 50 g. That doesn't really make much difference when the truck weighs 4600 g.

@richduperbash2966

3 жыл бұрын

It's true the weight loss from the CF parts was negligible. However, the collective weight reduction is very noticeable with the lighter chassis and wheels. Reducing top weight makes a big difference in handling and overall stability. The CF towers also don't bow forward after enough hard landings like the stock ones. They keep their form. We'll see how they hold up over time. 😎💪👊👊

Your gentle break in bash is equal to my oh s**t bashing....

I lose power 3-4 times every time I go out except "I" really don't lost power. (I'm learning) 😂

@richduperbash2966

3 жыл бұрын

LMAO 🤣. I totally hear you Brother 👊. Take your time and be patient with yourself. Things will feel more natural with practice 😉😎💪👊👊

Do I do it...... Yes I do.... First

oh nooooes the bmx track is gone. 😒

@richduperbash2966

3 жыл бұрын

Yep 😝. Always sucks when a good spot disappears. 😎💪👊👊