New Motor Mounts and New Engine Crossmember Install DIY
Жүктеу.....
Пікірлер: 22
@backyardbowties2 жыл бұрын
Awesome video. I would opt to use the stock claim shell motor mounts and swap to poly urethane clam inserts. But great walk thru
@Offroadfarm1
2 жыл бұрын
Thanks for watching!
@RozcoDan3 жыл бұрын
I just watched all your videos! I’m in the process of building the exact same truck.
@Offroadfarm1
3 жыл бұрын
Thanks for watching and good luck on your project
@RozcoDan
3 жыл бұрын
Thank you for posting this up. Keep up the hard work. I know how hard it is to make, edit, upload, and work on a project at the same time.
@Kurnacopia Жыл бұрын
Question for you: After install how did you find the engine vibration to be? I've heard the urethane transfers quite a lot of vibrations. But, i've never spoken to anyone that had them. Love the video and thanks!!
@Offroadfarm1
Жыл бұрын
There was no motor in the truck when I bought it so I can't really compare it to anything. It's also still not running so I can't even give you an opinion. I can tell you that Off Road Design states on their website that these mounts do transfer more vibration. Thanks for watching!
@CraftwerksMC3 жыл бұрын
Great video on the install, Just curious what motor you'll be putting back in it? I'm looking for some crossover clearance on my rig but also clearance on the oil pan of a 5.3 LS motor. Thanks!
@Offroadfarm1
3 жыл бұрын
Probable a 5.3 LS unless I luck into a 6.0 LS. Thanks for watching
@omarvalerio23613 жыл бұрын
Is this possible to remove with engine in vehicle?
@Offroadfarm1
3 жыл бұрын
Yes you will probably have to cut the engine crossmember to get it out. Thanks for watching
@customchoppers88243 жыл бұрын
Can you send me the correct link please? I have a 305 small block that im trying to fit into a 55 Oldsmobile super 88. I need the correct motor mounts and cross member. Thanks
@Offroadfarm1
3 жыл бұрын
I can give you the link for the product I used in this video but I doubt it will work for you. This is a 88 V30 frame (Chevy 1 ton crewcab). You could try calling Offroad Design and they might be able to tell you if their crossmember will work for you. I would NOT buy it without calling and talking to them first. Here is the link: www.offroaddesign.com/73-87-gm-4wd-high-clearance-engine-crossmember-for-big-block-6-2-6-5l-diesel-and-gen-iii-iv-applications.html Good luck with your project and thanks for watching
@customchoppers8824
3 жыл бұрын
@@Offroadfarm1 that's perfect I'll reach out to them ASAP thank you
@chickenfoundation93232 жыл бұрын
How much does it weigh vs stock
@Offroadfarm1
2 жыл бұрын
I am not sure, I didn't weight it. If I had to guess I would say that the new one is heavier but probably not by much. Thanks for watching!
@bristruestory21422 жыл бұрын
Do you know where I can find one for gmc 2003 single cab?
@Offroadfarm1
2 жыл бұрын
Motor mounts or engine crossmember?
@bristruestory2142
2 жыл бұрын
@@Offroadfarm1 engine crossmember
@thinkingofyouto13 жыл бұрын
Could you tell me why you’d want to change that to the Offroad design one
@Offroadfarm1
3 жыл бұрын
The Offroad design engine crossmember is stronger and has more clearance for crossover steering. Thanks for watching
@thinkingofyouto1
3 жыл бұрын
@@Offroadfarm1 Thanks for answering the question and another part I have to add to the list
Пікірлер: 22
Awesome video. I would opt to use the stock claim shell motor mounts and swap to poly urethane clam inserts. But great walk thru
@Offroadfarm1
2 жыл бұрын
Thanks for watching!
I just watched all your videos! I’m in the process of building the exact same truck.
@Offroadfarm1
3 жыл бұрын
Thanks for watching and good luck on your project
@RozcoDan
3 жыл бұрын
Thank you for posting this up. Keep up the hard work. I know how hard it is to make, edit, upload, and work on a project at the same time.
Question for you: After install how did you find the engine vibration to be? I've heard the urethane transfers quite a lot of vibrations. But, i've never spoken to anyone that had them. Love the video and thanks!!
@Offroadfarm1
Жыл бұрын
There was no motor in the truck when I bought it so I can't really compare it to anything. It's also still not running so I can't even give you an opinion. I can tell you that Off Road Design states on their website that these mounts do transfer more vibration. Thanks for watching!
Great video on the install, Just curious what motor you'll be putting back in it? I'm looking for some crossover clearance on my rig but also clearance on the oil pan of a 5.3 LS motor. Thanks!
@Offroadfarm1
3 жыл бұрын
Probable a 5.3 LS unless I luck into a 6.0 LS. Thanks for watching
Is this possible to remove with engine in vehicle?
@Offroadfarm1
3 жыл бұрын
Yes you will probably have to cut the engine crossmember to get it out. Thanks for watching
Can you send me the correct link please? I have a 305 small block that im trying to fit into a 55 Oldsmobile super 88. I need the correct motor mounts and cross member. Thanks
@Offroadfarm1
3 жыл бұрын
I can give you the link for the product I used in this video but I doubt it will work for you. This is a 88 V30 frame (Chevy 1 ton crewcab). You could try calling Offroad Design and they might be able to tell you if their crossmember will work for you. I would NOT buy it without calling and talking to them first. Here is the link: www.offroaddesign.com/73-87-gm-4wd-high-clearance-engine-crossmember-for-big-block-6-2-6-5l-diesel-and-gen-iii-iv-applications.html Good luck with your project and thanks for watching
@customchoppers8824
3 жыл бұрын
@@Offroadfarm1 that's perfect I'll reach out to them ASAP thank you
How much does it weigh vs stock
@Offroadfarm1
2 жыл бұрын
I am not sure, I didn't weight it. If I had to guess I would say that the new one is heavier but probably not by much. Thanks for watching!
Do you know where I can find one for gmc 2003 single cab?
@Offroadfarm1
2 жыл бұрын
Motor mounts or engine crossmember?
@bristruestory2142
2 жыл бұрын
@@Offroadfarm1 engine crossmember
Could you tell me why you’d want to change that to the Offroad design one
@Offroadfarm1
3 жыл бұрын
The Offroad design engine crossmember is stronger and has more clearance for crossover steering. Thanks for watching
@thinkingofyouto1
3 жыл бұрын
@@Offroadfarm1 Thanks for answering the question and another part I have to add to the list