Bought it. Used it within the first week. Continue to use it. Makes life so much easier and safer.

Can’t wait to try it out. Something we all struggle with, Thanks Izzy for solving the problem for us all... 👏❤️👏

Izzy My table saw infeed table just came. I installed it and it works great. I am in awe of your talent and creativity. Can’t wait to see what you are up to next Terry

Brilliant idea, made one for my saw. Because it is a cheap contractors saw (but works beautifully), the rip fence rail is extruded aluminium, fortunately with flat surfaces top and bottom, I devised a clamp that holds it against those planes with the cam acting in the vertical axis. I've just used it to square up the ends of some glued up panels using my mitre gauge, a job that I always had trouble with in the past. Why did none of us think of this in the past? Thank you Izzy.

Impressed by the amount of detail you put into it to finish it. Wish it worked for my saw as I would have likely bought one to support - keep doing what you doing!

Thank you so much!!! I ordered one before you got into it once I saw what you had there! I had a great DeWalt hybrid saw (I think it was the 746) and had the small but beautiful cast iron sliding table on it. Well when I sliced off the end of two fingers my wife told me to get the SawStop. Bye bye DeWalt 746. I really miss that sliding table but I put out the cash for the Incra 5000 miter sled so I could still easily (or so I thought) true up the tops and bottoms of cabinet sides. Your infeed clamp is exactly what I need ... at least I'm hoping so ... to use that sled on parts that are 24" wide. THANK YOU!

So good to see you up and about without being in pain -- god speed! Best - Michael

Thanks for such a great idea, just been down to my saw for measuring and will have to make one myself as the height dimensions are smaller but doable This will make a big difference to my sawing and handling larger pieces in safety and confidence Yahoo!

I literally needed something like this today, and was about to slap something together, then I saw your video and it looks far better than what I would've come up with. Ordering now!

Hi Izzy, to start off I think this table saw extension is amazing and well designed.

Great idea Izzy! Glad to see you back on your feet!

I’m a carpenter with forty plus years of experience I’ve preached my whole to my crew jigs and how important they are for our continued safety I appreciate your thought process

Awesome. I love the idea of extending the table for the plywood cutting

This is fantastic!! I’ve always thought why is this not standard with TS. You’re a thinker and genius. Buying mine right now!

Fantastic idea! I constantly have this issue with my SawStop JobSite.

What a great looking product, a must have for most table saws. 👌🏾 Awesome work and excellent invention, mate. 👍🏾

Just finished installing mine. FYI, installation steps were identical for my jet xacta fence for a good fit. Amazing idea, Izzy. I debated shamelessly ripping off the design and making my own, since its easy enough and I have everything needed laying around. And I'll be honest, the shipping cost made me cry a little bit. But for the great idea, and how easy it was to get installed, the price was a steal. My only feedback so far - I think it could use a longer bushing on the cam clamp so I can tighten down the bolt without binding it up or worrying about it falling out down the road. I'm a little skeptical about the clamp arrangement in general, but I'll be putting some miles on it to see how it goes before I make any changes.

Looks a lot like that front table extension that Shopsmith introduced back in the 1950’s that replaced their front table extension from the 1940’s! Seriously, it’s a great idea and I’m surprised it hasn’t been produced commercially until now. Cottage Industry for the win! Way to go, Izzy. Scott

Awesome idea Izzy. I love the way your mind works. Keep up the good work.

I’ll be putting ordering one for my saw stop! Thanks issy! 👍🏻

Love the ingenuity! Great job Izzy; thanks for thinking of us out here.

Great idea ! I can't tell you how many times I've needed an extra foot or two of infeed support . I'll have to make one though, 1 -because my grizzly has a round fence bar , and 2- I have some laminate left over from a job. TU for sure !

I ordered both for my UK version of the DW745 on Sunday, massively looking forward to fitting them both. These will make a massive difference for my saw which is on wheels in a small workshop. They will compliment my "Flappy Paddle" safety stop switch which I sell on my Etsy Store.... Thanks Izzy (I will put up a link if Izzy has no objections)?

Awesome product Izzy. Ordered one this morning. Thanks!

I’m just very pleased to see you bobbing around, Izzy! 😎👍🏻👍🏻

Great job Izzy Swan 👍 that is awesome now you need to design one for tubular fence rails. Because my saw has them.

Izzy, kudos on a great idea. When I saw 'in feed table' in the title I figured it was going to be in the way. Again well done.

Just got mine as an early Christmas present! Can't wait to use it!

Just ordered mine of your website. Looking forward to using it. Thanks Izzy!

Great Idea. I ordered one to save myself the trouble to make one. looking forward to putting it on my Saw

Absolutely an awesome idea and product

Great looking product. Just ordered one for my sawstop!

This is genius. Its a problem ive always had to solve with my tracksaw, which is a pain in the ass. Great job dude!

So simple and elegant, very well-conceived.

Just got it and it fits and works great on my SawStop.

That's awesome! Genius addition to any saw.

Perfect, spectacular, and spot on!!! I ordered mine as soon as I saw this video. I have used multiple "solutions" for this, none of which I liked. I am looking forward to receiving mine soon.

@izzyswan

3 жыл бұрын

Glad it helped!

What an absolutly brilliant idea!! I'm hoping that the one yoiu're making for the Dewalt saw will work on my Delta jobsite saw. Staying tuned for updates.

Awesome fixture Izzy! Great to have you back at it and progressing from surgery. Would love to have one for my SawStop job site saw gen. 1 Is that something that you will be offering at some point? Keeping my fingers crossed and my hopes up that the answer is YES! Stay safe and healthy my friend!! Mike

Hey Izzy, Don't forget us Sawstop Jobsite Saw users! Something like this is sorely needed... Thanks loads for all the videos, explanations, ideas and inspiration.

@richthib100

4 жыл бұрын

Ditto!

@warrenxanthos8241

4 жыл бұрын

Third

@RobyWanKenobi

4 жыл бұрын

He is using it on a Saw Stop.

@warrenxanthos8241

4 жыл бұрын

@@RobyWanKenobi but not a jobsite sawstop.

@greggdrennan

4 жыл бұрын

@@RobyWanKenobi Yes it is a Sawstop but it's not the portable Jobsite saw...very different.

Ingenious solutions as usual. And it's good to see you back on your feet!👍

Great idea! Good to see you on your feet again too.

Tres bonne idée j’adore vos vidéos vivement la prochaine 👍

My mid 90's Unisaw came with something similar but out of cast iron and locks on to the unifence rails. I hardly ever see them around and not sure why they are not more common. This looks like a good solution.

This is why I watch you, excellent.

HI IZZY IM SO HAPPY SEING YOU ON YA FEET AGAIN HOPE YOUR WELL AND GOOD. KEEP SAFE BRO.

Love that design, it doesnt block access to controls and give the support needed. Now you need to make one for the Bosch 4100.

@izzyswan

4 жыл бұрын

Working on it!

Nice addition Izzy 👍 Wish my saw had that style fence to be able to use this. I have the Ridgid R4512 with the factory fence right now. Thinking about upgrading it to the Incra fence system. This would probably work with the Incra fence.

I'm disabled vet and even with my wifes help in feed AND outfeed is tricky. Looking forward to getting mine.

Great design as always, Izzy. Been meaning to make something to solve this problem, I'll probably be borrowing/stealing your great idea for my own shop. Glad to see production and orders are going well on IG!!

Happy to see you in that good shape ♥️

Received your In Feed Table for Standard Table Saws. Breeze to put it together..but the video instructions said to locate the latch 2" away from the table because of the miter slots. Well, the miter slot was actually 1 5/8" away. The screws protruded into the miter slot so I had to redo that part. No issues besides that. This does solve instability issues I struggled with in the past.

I'm a fan of the DeWalt DWE7480 for it's compact design with safer R&P guidefence, but something similar to this is good idea to go along with my outfeed/router table extension design. 👍

Thanks heaps for this Iz, it will really solve my table saw issue

Very excited to see how the DeWalt one will work.

Absolutely brilliant!

Izzy you’re a genius!! Brilliant idea!

Thanks! I have a factory built extension for my old ShopSmith.

Made it only 2 and a half minutes into the video before scrolling to link in description and buying. This is the thing I've needed for years, but never even knew it.

Thanks for saving me so many trips to the store and emergency room!

Brilliant!!! I need this in my life!!

You need to manufacture more of these, Izzy

amazing work. Realy interesting and well tought. Waiting for the dewalt infeed table!!

Great job Izzy! I like that thing.

Oh yeah, memory, that's what it's called! 😊. Take care Izzy!

I just saw this. Its brilliant! Thank you

This is by far the best, very best You Tube channel! “Izzy you the man!” Great job!

@izzyswan

3 жыл бұрын

Wow, thanks!

Will you do a companion vid with the Dewalt version? The measurements at the end of this vid would be helpful for those with off brand job site saws. Other than that shut up and take my money, love the concept!

That is Avery good idea, I’ll have build one thank you Izzy!

Fantastic idea, Izzy! That's really brilliant! 😃 Stay safe there with your family! 🖖😊

I love your ingenuity

Lol I'm glad I kept watching, I was like I guess I gotta design one for my Dewalt job saw.... but nope izzys got me covered

Very cool idea 👍 Thanks for sharing.

Just ordered one! Huge fan of yours!

Great job Izzy

I did something similar to this with just a couple of pieces of 2x4's notched to sit over the front rail. I shimmed the top up to exactly level with the table top using Formica off-cuts from a table top build for my son's trailer. The width can be adjusted individually to provide edge to edge support. I have been using this for years and had assumed that everyone did something similar. Maybe I should have said something back then, I use them so often that they pretty much stay on the saw.

Great idea.... How much of this do you dream up when you can't sleep at night..... Your cool ideas just keep coming. It helps make me more creative with what I do and how I can get it done.

Thanks Izzy. Just what I need for my Dewalt job site saw. I immediately placed my order after watching this video.

@izzyswan

4 жыл бұрын

thank you

@melissalara2

3 жыл бұрын

Have you got it yet Steve?

@cpta03

3 жыл бұрын

Mel & George Lara Not yet. But Izzy sent me two emails apologizing for the delay. It appears he was not prepared for the large number of orders received.

Sweet. Just bought one!

Brilliant idea!

Really cool Izzy, awesome job! 😃👍🏻👊🏻

Always great stuff! Well done Sir Izzy!👍

Great safety feature.

Bought one. Great idea.

Genius, Ordered! Thanks -Z

Izzy You always have something (and often many somethings) to improve the accuracy and safety of my shop in every video. I am a musician and am extremely careful not to injure my fingers and hands but love to work in wood in my shop. Thank you,

What a cool 😎 channel ; just came across it by accident. Looking how to make a sled . Smashed that like button , like I was making a snap tie , only because I saw 👀 those pieces of rebar in the corner! Ben a ironworker for over 30 years ! Want to try a little wood working for a hobby ,

Very good idea and design.

I’ll be ordering a dewalt model soon. Thank you!

Very nice!!!

beautiful idea, even if i wanted to order it, it would cost me more the shipping than the tools 🤣🤣🤣🤣🤣👍👏👏👏👏👏👏.As always shared a hug from Italy

Going to pre-order the Dewalt one!

I saw the pieces in your communication about no video, now I know what they are for.

That is freaking cool!

great invention please do the vid for the dewault option

Yup just ordered mine 👍

VERY nice. Great idea.

Tolle Idee und Umsetzung

Fantastic 🛠️👊 Ordering now 👍

Unwieldy, Izzy's word of the day!