You know, the picture of all those Ironman figures lined up has made me realize just how well Lego has treated him over the years. He always has exclusive leg-printing, he always has an exclusive face, and even though that one-piece helmet isn’t as nice as the other one, it was still made specifically for him, it wasn’t just reused to save money. Although, I’m not a fan of the new helmets. They look way too big

@hagridsham1184

2 жыл бұрын

Compared to batman on the other hand lmao

@Jay-Zech

2 жыл бұрын

@@hagridsham1184 It’s funny, but that’s exactly what I was thinking. I mean, even the Lego Batman Movie version of BM doesn’t doesn’t have leg printing, even though almost every other major character did. Captain America has never had leg printing(the CMF figures don’t count), Black Panther never gets any, Thor rarely gets any, most major character just don’t get the same love that Ironman does

@DatPRGuy2017

2 жыл бұрын

@@Jay-Zech Yup, it was only recently WITH the Love and Thunder sets that the character had leg prints

@Jay-Zech

2 жыл бұрын

@@DatPRGuy2017 Yeah, I think the two Thor figures from Ragnorok had Leg printing, but he was the only one in the wave to have any

@Seahawksfan120

2 жыл бұрын

That picture is from a different KZreadr his name is mini superheroes today

I don't understand why they are trying to fix something that was already PERFECT! The old one is waay better than the two new ones. Really Unnecessary.

@gamingwithhenry5919

2 жыл бұрын

debatable

@nukegames99

2 жыл бұрын

Basically like tommy said, to make other suits a possiblity to make

@somethingfunny2199

2 жыл бұрын

It's like the Stormtrooper helmets we have now, an unnecessary upgrade which could have gone to the Royal Guards

@marwana4834

2 жыл бұрын

Because its not perfect. There is still much they can improve on from the original design. They should have made one similar to the phoenix customs version which Id argue is the best version of an iron man minifig.

@MrEmeraldMan

2 жыл бұрын

Because people bitched about the mark 85 and 50 not being accurate so lego did their best. But ofc people will be people and bitch

I'm fine with this new helmet. It's big, but the stormtrooper helmets also grew over time. I didn't realize it could open at first either and I like it more when I found out. I think it just looks a bit odd because we're so used to this old helmet.

@agreengaming3959

2 жыл бұрын

Also The Eye size but we don’t talk about that.

I think that the real reason they have changed the helmets is not only to lower production costs through it's versatility but also the facts that the original helmets came in separate bags meaning they were likely produced in China and not in Denmark as many detailed Lego pieces are. By producing them in Denmark with a quick reprint for different figures, manufacture, transportation and packaging costs can be cut too. Also, the reason I think the helmet looks too tall is that much like the recent Darth Vader and stormtrooper helmets, the LEGO design team seemed to be aiming towards making a more accurate design for their helmets for minifigures in spite of the unhuman dimension of their cylindrical heads. The original design had its eyes too far up making its forehead too short but now the forehead (most noticeable without the visor attached) has been enlarged. Although the helmet is more accurate because it closer to human head proportions, it looks unproportioned to the already irregular proportions of a minifigure's body.

Honestly I think we should use all three helmets in the future it makes for nice versatility

The new helmet is very good but nothing will beat the original. Lego made the perfect design for the iron man helmet the first time. Lego keeps trying to make perfection better.

@swiftstreak98

Жыл бұрын

If it's not broke don't fix it

I personally really like the new helmet. The older one felt almost overly detailed in a way for modern Lego, especially compared to other lego helmets, meanwhile the new one is simple but it brings it more in line and feels more official.

7:25 Well, at that comment, I will say that in terms of Iron Patriot, we actually still need the Iron Patriot armor from Endgame. They could probably use that Star Wars Wrecker shoulder armor to help give an Endgame LEGO Iron Patriot that more heavy-duty look he had in the film. And since that shoulder piece has studs on the back of it, it would be easy to place his shoulder gun onto the piece.

@1990hondacivic

2 жыл бұрын

Trtrrrrrx

The jarring thing for me is how the lines where gold meets red doesn't line up with the separation point of the faceplate. It kind of ruins the facade

@Cris_goji

Жыл бұрын

i agree while it didn't bug me with the old mold i wish they fixed that with new mold.

I kinda like the new mold, I mean sure it’s a bit wonky but I love that LEGO decided to create a new mold so that they don’t have the mask be too similar to each other making it easier to recognize the different mask shapes. Also I hope in the future they do a updated MK 6, 7 and 42. I love the prints but LEGO could do better and they definitely will!

@nukegames99

2 жыл бұрын

They did kinda redo 42 with this years mech

@dfprod.

2 жыл бұрын

i agree

@AsianStudioss

2 жыл бұрын

@@nukegames99 Yeah but it’s still not the Mark 42. I love the minifigure though, but I would love to see them update it and giving us a better detailed fig

@Coolgamer..

2 жыл бұрын

The new helmet is soild and are least better than the avengers game version.

As someone who owns all but one Iron Man figure (both MCU and comics), I really hate how the new helmet practically ruins the look of the collection as a whole when displayed together

LEGO did the same with Star Wars Stormtrooper helmet. Although the helmet has had a lot of different printing styles over the years, it was the same mold until a few years ago when it was redesigned, in a bad way, but still keep using it. At least LEGO listened to the fans and only used redesigned rebel pilot helmet in one set and switched back to the original since then.

Yo that background music transitions is as smooth as a car crash.

@Cris_goji

Жыл бұрын

i should know

I love the new mold, it’s great for the more wacky iron man suits and the original was never really accurate except to a few suits, otherwise it was out of date. Now they have a new mold to use on helmets that don’t follow the original mark 7/8 shape. Besides they’re perfectly able to use all three if they so desire unlike with the stormtrooper where they can’t really go between the two helmets.

The chaos this piece and it’s changes incite is mind blowing 😂

I think they could keep the old 2 piece helmet for the regular iron man armors and for any others that it would make sense for(rescue or certain other irom man armors) use the new molds.

One of the holograms in the new set shows a diagram of the silver centurion with the new helmet design, really hope they don’t re release it as that figure is perfect

@Cris_goji

Жыл бұрын

i saw the picture and have the set and just realized this till now damn i hope they don't

I don’t get the consistency thing, because to me they are supposed to be different suits, so they can have different helmets

Honestly I'm really loving the Infinity Saga set's so far and I Hope DC gets something similar with re realising/remaking old Batman set's

Nanotech suits work PERFECT with newest helmet design. Older suits tho......Yeah, its too damn big...

The newest helmet works best for armors Mk39 forward, and select armors before. The first version is simply too angular for some more modern armors. The second version works best for other characters at this point, given how well the other two cover the armory.

the mark 85 used to be so exclusive but now its everywhere!

@Cris_goji

Жыл бұрын

ikr.

@cesruhf2605

5 ай бұрын

who cares

The one piece helmets works only for the mark 1 suit, because that was what the mark 1 helmet was.

@Cris_goji

Жыл бұрын

yep

I do home that they re-release most of the older iron man figs because as a newer marvel fan it would be amazing to get those in lego

I really love the second version of the face pieces

I like the new helmets, but I think that the prints are too small, and this makes the helmets just look weird. It makes the chins look big and wide

The new Iron Man helmet might be something made for other characters for future use since we'd only be seeing rereleases for Iron man since Tony is dead now, the new helmet might be for new characters like Iron Heart in future MCU films

TJ lego did a short on the new hall of armor, the helmets looked good when i first saw them but i gotta say after that video they looked even better! Can't wait to get this set

as someone who wasn't collecting lego at the time of any previous hall of armour sets i really like the new helmet and hope they redo previous armour sets, but i do understand how that could feel annoying for collectors

I’m fine with the new helmets, all the Iron Man suits are slightly different anyways so a few different types of LEGO helmets aren’t a big deal. I’m more annoyed the Armoury design is different.

I feel like they could also use the new helmet for a lot of other themes, like a sci fi cmf minifig or a sci-fi theme or something

I honestly feel like giving the guy who had the idea of changing the helmet design a falcon kick

Awesome 🤩👍⭐️👏👌

I just gotta see this in real life, to see if it’s bad or good, nice video

I am at least hoping that since they went and made a new mold, that they are going to be releasing more Iron Man figures this year. I am surprised we never got a blind bag run of just Iron Man.

That old helmet can't support non-mcu designs. So I'm all for the new one. Lets them make literally whatever they want.

@Jason49110

2 жыл бұрын

I agree, the new helmets look way better in my opinion

@84everfan90

2 жыл бұрын

@@Jason49110 I'm still cautiously optimistic though, a lot of misprints could ruin this

@Jason49110

2 жыл бұрын

@@84everfan90 eh, i doubt it would happen

I’m just glad they made the first mk 3 with the old helmet I’m planning on buying a few off bricklink just to put on the new mk 7 and 6 and hopefully a mk 4 in the future I think the new helmets works great for the nanotech suits though

I would love if Lego were to make something like a CMF of iron man suits updated with that new helmet. in my personal opinion it's far sleeker and better looking than the old ones even if I can't tell whether or not it's a new mold. it is quite upsetting for Lego to break continuity like that so offering up a CMF or something by those lines would certainly act as a solution.

i feel like it would work for the iron legion suits but for actual named characters like war machine it just doesn’t feel right (that could be debatable tho since the printing is a little off)

Maybe they could add a chest plate to make the overall figure bulkier as to throw off the increase in height?

im probably just gonna swap around helmets to make it so the older figures have the older helmets, but then the later suits get this newer helmet as if tony redesigned the helmets after a certain point

there were 2 things i wanted for the new helmet when it was announced, 1. it opens correftly with the bottom chin part staying, whil the mask opens 2. and its not oversized compared to the other 2 it not onlt didn't fix the way thr mask opens, and its bigger than the other helmets

@Cris_goji

Жыл бұрын

true but it's alright i guess

The first one, i traded a captian america for a iron man mini fig when i was a kid, and the helmet was my fav part so im bias toword it. Its way better then the newer ones

The new one looks really good with certain prints

I'm actually more annoyed they changed the build of the individual armor chambers from the first two hall of armor sets that connected and stacked together perfectly

if you look at the ironman helmet on tony's desk you can see that it's slightly opened so the new helmets do open up if you want to look go to 7:35

@Cris_goji

Жыл бұрын

i come from the future to say yes they do. (which if you see this now you already knew that)

Rescues suit is bluish purple so I think it fits.

When you compare the different Iron Man helmets together while EXTREMELY up close with the camera, of course you'll notice the differences. But in real life and they are sitting on a shelf a few feet away, how likely are you going to notice?? A specific KZreadr who will not be named said the Grogu figure is "too fat" from front to back. HOWEVER, the Grogu figure is so ridiculously tiny, you don't notice this detail unless you are extremely zoomed in!! I think too many of you are obsessing over these miniscule details on MINI figures. The differences are literally so small they are negligible!

@Cris_goji

Жыл бұрын

agreed. 👍

You don’t need consistency the changes make the collection look more interesting

Not gonna lie the first and second iron man helmets look better imo. Only problem is that there are inconsistencies like the armors in the hall of armor set and the difference of pepper’s suit mainly in the helmet shape (which i thought was a good idea for the time, as the helmet in the movie was different compared to any iron man armor). Hope it looks a bit better in person and grows on me. It’s nice to see that they’re at least trying to incorporate the advantages of both the first and second helmet in one. Hope the second helmet stays on comic book sets and the first helmet to stay on older suits like the iron man mark 3 to obtain consistency.

So you wouldn't like it if they used the helmet closest to the suit, because they would look inconsistent together? Or would you be okay with different molds for different eras??

I prefer the new helmet The old one was really good but it was simply too blocky for the newer suits The new one is great for the mk 50 and 85 and considering all the different prints they could add on the helmet

7:12 as someone who has the briefcase piece from Malibu mansion, I’d really like to have this Iron man suit remade

@swordchannelfires

2 жыл бұрын

No just no, the old 1 was already detailed, y would u want to change something that was already perfect

@Regeor

2 жыл бұрын

@@swordchannelfires Because you can’t get it anymore, and I would like a version of the suit

In my opinion, I think the new helmet works well with the mark 80 & 85 armor. To me it seems more accurate.

I guess I'm not as upset about the helmet change as everyone else because I just now started collecting mcu figures and don't have as many iron man figures as everyone else who already have so many.

Lego rehashes pices that don’t always work, because it’s cheaper to not change the tool out. now I think the digger and to lesser level war machine, look really nice and well fit in my hall.

I find this one is all right but its a bit too tall and i dont like how the face plate has SOO much of the red bit of the helmet attached to it plus the original was perfect

I just noticed that the sticker for the silver senturion has the latest helmet design instead of the old one

@Cris_goji

Жыл бұрын

they probably gonna redo the suit

I think the Excavator suit actually looks better with the new helmet as its meant to be bulkier but the rest are normal

@Cris_goji

Жыл бұрын

not only that but we finally have the excavator suit

I see the complaint that it looks too big a lot. The old ones weren't small either. The thing about helmets is they'll always seems somewhat large

Lego be like: Change what people like? Yeah! Make it worse? Heck yeah!

@Jason49110

2 жыл бұрын

I think it looks better than the old ones

@coolbuck7214

2 жыл бұрын

@@Jason49110 to me, its too tall and thin. Honestly I like that they are bringing back that it can open up, but lego changes everything all the time. Some are good, some are bad. Until we get the sets, who knows? But anyway, thats just an opinion, MY OPINION thanks for reading

@Jason49110

2 жыл бұрын

@@coolbuck7214 you didnt have to say "my opinion" twice, i would have respected your opinion for the first time, im not in a Twitter user

@coolbuck7214

2 жыл бұрын

@@Jason49110 i didn't say "my" twice. I was making a goofy ahh game theory joke

It’s like both of the helmets had a baby

I like the new helmet

Maybe it easier to put more detail on a flat surface

i think it’s really really good

Also really confused why they included the MK 85 and MK 3 in an Iron Man 2 set when they should’ve just included the MK 4. That’s a suit we’ve never gotten yet and would work fine as a different figure than the MK 3.

@Gzilla313

2 жыл бұрын

They need to release an airplane with the MK 4 because Tony paradropping into the Stark Expo is the only time we see the MK 4 outside his hall of armor.

@DatPRGuy2017

2 жыл бұрын

@@Gzilla313No lmfao. There are several scenes where he uses it like his fight with Rhodey, when he eats on top of the donut, etc

I'm open for them rn the printing scaling is kinda bad the print seems small for the mold

I like the helmet ngl

Aye, and in the new Quinjet

Cool

I think a good comparison would be the Darth Vader helmet change back in the day.

the new helmet looks like they stretch the old one

Now if only they could just give us an accurate wasp helmet

@Cris_goji

Жыл бұрын

i hope they do why the hell did they use the comic iron man helmet

@Albino_Basilisk

Жыл бұрын

@@Cris_goji yea LEGO’s new mold piece choices are WACK

@Cris_goji

Жыл бұрын

@@Albino_Basilisk honestly

I think this helmet should have only for the sleeker armors not the original armors

It looks a bit too big and shouldn't only the gold part open?

The new helmet made since on the mark 1, it seems weird on everything else

Jeez that helmet piece is cursed

I think it’s pretty good better than the last one but the first one was really good too but ion know

Since we have so many batmans over the years at this point Tommy, Freak consistency what matters is improvement and dang good quality upcharge especially with a better looking lego design for the hall of armor and a helmet piece which is great for a custom painted red hood helmet LIKE COMe ON CONSISTENCY MY BUTT!!!!

while I think the back of the new helmet is too round, long term this helmet is going to do well. I get that people want something consistent, but they can honestly just chalk it off as armor variations, and it's way more forgivable than using the one piece helmet mold for MK 1. Lego is actively trying to make things more accurate, something they don't always have the chance to do, so I don't exactly mind.

I made a cool bike for the new ghost rider figure I got today!!! 💀🔥🏍

The one piece helmet is good for juniors sets

honestly, I really like the new helmet, IMO it looks way better

Cool.

I honestly think this is just fans not liking the change. I have just started collecting lego marvel this month and i am not even that interested in the MCU sets, so i feel like that gives me a fairly unbiased opinion. I think the new helmet is my favorite. I think the first one looks just as big but the shape does not look as good. The single piece one does look better for comic style ones.

I really like it

It looks like someone bashed the helmet into a rock

The original is iconic, but the new flip helmets look more accurate

I wish they made more variety in the Iron Man suits. They keep on making dark red ones or war machines. I would like my Hall of Armour to be more colourful, not just red and gold

@crispedraptorstudios8729

2 жыл бұрын

While I completely agree, Lego is making sets primarily based on the movies, with very few, if any, sets based on the comics or something original using the Marvel characters. An unfortunate truth is that once the MCU started, it started a wave of synergy that spanned across all of Marvel's merchandise. Gone were the days of Iron Man being seen as Tony's bodyguard or a robot he built. Now, in most stories, if not all of them, the world knows Tony is Iron Man. It didn't stop with Iron Man either. There's a reason Thanos and the Infinity Stones were pushed to the forefront in games like Marvel vs Capcom Infinite and Ultimate Alliance 3. There's a reason you don't see alot of merch with characters like the X-Men and the Fantastic Four, with some exceptions being Wolverine and Deadpool. The MCU reigned, and still reigns, supreme in the superhero world, and while it still makes money, Marvel will make the merch to match. As for why it's consistently red and gold suits or gray suits with few exceptions? Again, those are the types mainly seen in the MCU, with only glimpses to other suits in other colors. It's a sad trend I hope to see disappear one day, but one I fear may never end until the MCU loses steam.

@Regeor

2 жыл бұрын

@@crispedraptorstudios8729 I see what your saying but there are still suits from Iron Man 3 that they haven’t made yet

@muisverriet

2 жыл бұрын

Well, Iron Man is mostly red and gold

@crispedraptorstudios8729

2 жыл бұрын

@@Regeor True, but most of those suits probably won't get made, as they were probably filler suits just to show how far Tony took being Iron Man at that point, and Lego is still a company working to make money, so it wouldn't make sense to them to make suits that were only on screen either in the background and/or for only a few seconds.

@crispedraptorstudios8729

2 жыл бұрын

@@muisverriet Yeah, when people think of Iron Man, they think red and gold for the most part. That's what sells the Iron Man character, so it makes sense that the main suit coloration is red and gold.

I think lego should make both like make new iron man suits with the old MCU helmet that they haven’t done in the old MCU helmet so we will have all 51 iron man suits including rescue plus war machine and iron patriot and do suits they haven’t done in the new helmet so we have all the suits in both helmet styles so you could display them separately and you get the best of both worlds

@Cris_goji

Жыл бұрын

i have a strange feeling that's probably what there gonna do..but i feel like it is a permanent redesign

Everyone just needs to admit the og helmet is the best and I have almost all of the og suits

@kasc5598

2 жыл бұрын

Lol No

They should keep all three molds.

Personally I think the new helmet mold is balling

I think they just need to add arm printing

@Cris_goji

Жыл бұрын

a little more to add on..but true and maybe side leg printing or side torso

Lego and consistency have never really went hand in hand. Look at Lego Star Wars. However, the plus side to this is that going forward, Lego can rerelease a bunch of suits. Also, just buying extra newer helmets will allow you to update your older MCU figs without compromising much inaccuracy

When are you going to re-visit Lego Mario? It needs to be ragged on more! -Rama

now this is a avengers level threat

@Cris_goji

Жыл бұрын

no kidding

I’m sorry but as soon as I saw the leak I was disappointed with these sadly maybe it will grow on me but sadly I don’t think it will although I do feel like there are alot of positives in this set overall

They do this instead of a new phase 2 Cody helmet

im not fan much of new helmet face plate, yeah lego can do more with print but new helmet also looks bit to big i think for mini figure as original 2 piece helmet size looks more reasonable.