Timestamps Unboxing & key features: 0:28 Programming: 3:02 In the build: 6:21 Speed tests: 8:57 Indoor course runs: 9:58 Rock crawling: 15:19 Final thoughts: 19:22

@RCCrawlerz209

10 күн бұрын

Question is: can you do a video on this system on, how it would work with the Spektrum ESC connected to it??

@siwood22

5 күн бұрын

@capecrawlers have you found a solution to running the injora 43:1 reduction gears in their billet case. Mine bind when case is closed lightly, seems others have the same issue.. I may make clearance tomorrow at work, but wondering if you've ran across this. Trx-4m platform. Tia

Fail out of the box, a real confidence builder 😂

@gtheodor82

10 күн бұрын

This right here. Not sure whats the purpose of this review since the whole video was shot with their pre=release version of their ESC 🤷🏻‍♂

Any plans to dress up the indoor course? It would be cool to see an update.

I am still hoping that there will be a brushless TRX4M conversion kit, with an ESC/receiver combo, that will bind with the stock and aftermarket transmitters. And that will control the tail lights/brake lights/backup lights like the stock ESC does. I do not want to have to add a separate light controller. I like minimal wiring and to keep it tidy. Also, make it the same size and configuration as the stock ESC/receiver. I would buy three today if this existed. Injora, are you listening?

Thanks for your multiple test, it’s an inspiration for my trx4m and you have a good comments. Continue to give fun ☺️

Love the support for Matt at 2fm! Another awesome video, Adam! Def going to be getting one of these for one of my minis

One thing to note you breezed by the motor kv must match in the programming. That means you CAN run any senseless motor with it. Just tell the esc the motor size.

That aint slow. The current slow crawl record is 4:25 over 10cm. Can any1 beat that? Love to see it👍🤠👍

So glad AM32 ESC's are getting more and more popular.

I have two Defenders. One is built for crawling the other one is just stock with all metal drive train and fast gears. I could make it faster with overdrive gearing in the axels in the future. But it is so much fun to see it drift around and do donuts and what not. I feel like I needed the fast one to be faster and this feels like it. I want to tune the fast one like a Baja truck so it can handle rough terrain at high speeds. The crawler is already so capable I'm just enjoying watching it do its thing out on the rocks.

I love how you do time stamps

SOOO glad to see something able to give Furitek a true competitor at a decent price!! The Spektrum Firma just didn’t seem like it was “it” haha I don’t think I’d want to buy anything like this without seeing you test it first. Thanks and great video!

These are sure to sell out in no time!

Sweet!! I just orderd mine.

Really smooth and powerful system! I dont have a extra transmitter and reciever lying around, so what would be a decent, budget friendly transmitter/reciever combo?

LMAO the on/off switch is almost as big as th esc it's self 🤣🤣

Impressive but I am more impressed by that things turning radius. Good vid Adam

I want to get more speed but do you think this setup with the high speed gears would be too fast and I would lose the slow crawl?

Will the stock transmission with crawlers gear hold up to this system? I am running the traxxas steel diff gears already.

Looks great!! I hope they do this setup for 1/10 scale crawlers

@DrKVo13

13 күн бұрын

Already sold out

What’s your best battery recommendation for an axial scx24 v3 ?

Looks l like I gotta wait for the Scx24 version! 😅

@christopherdosh1999

13 күн бұрын

😢 me too

@CalebKirchoff

13 күн бұрын

same here

@user-ji8ls9dr9f

13 күн бұрын

Yip

@troypostie1252

11 күн бұрын

What r you guys on about? We already have the mounts and stuff to bolt it up. I'm running it in my c10 no trouble

@CalebKirchoff

11 күн бұрын

@@troypostie1252 no way

Do you think this would fit the Meus 2 speed motor for that ultra crazy low power and performance?

is there any easy way to combine this with the scx24 or is that too much to ask for?

Will the have something for the Scx24 in future?

How does its waterproofness compare to the default TRX4M motor?

Can you review the injora mb100 wanted to see how that preformed for it being a bruised esc

I’d love to see that setup with a 3s in the TRX4MT

Would this work for the Scx24 transmission?

Almost glad this isn’t available for the SCX24 as I am currently waiting on delivery for my lizard pro esc, and motor mount for the micro Komodo to go in my Dead bolt

will this work on the SCX24 platform??

I hope they make a brushless kit for the scx24, surprised this came first. Either wait or get the furitek starter kit

Would it work in the capra 1/18 scale

What specific radio transmitter and receiver are used when upgrading your crawlers like this?

@viperfangs4848

13 күн бұрын

In this video, it's a Radiolink RC8X transmitter and a Radiolink R4FGM receiver.

Is an fms one coming out?

I was just wondering what shocks are on there

Looks great. Basically it’s a mini Hobbywing Fusion. I’m surprised Hobbywing hasn’t made something for the mini rc, their 1/10 scale fusion stuff is amazing . RC fun and games reviewed this set up and said you will get a Traxxas battery adapter when purchasing but we need to buy a receiver ?

@JUSTHAVEFUNRC

13 күн бұрын

It’s more like a standard brushless esc and motor. Hobbywing fusion is a 2-1 system containing the motor and esc in the can. I doubt Hobbywing will make anything for the micros unfortunately. Holmes hobby’s recent videos on micro crawlers made me realize that a lot of companies don’t really see micros as a good return on investment. Castle released mediocre sytem and the spektrum system is just a repurposed esc/motor meant for like a touring car or something. Which is why it was pretty awful. I’m getting long winded here lol. But the new furitek 2-1 would be closer to the Hobbywing fusion’s. But knowing Furitek it’ll likely cost even more than the fusion pro…

@ryand4786

13 күн бұрын

@@JUSTHAVEFUNRC yes I understand the differences . All I meant is it has wheel speed when you need it and great control on the low end, therefore it acts like a Fusion motor. If they thought it was worth their time they would have already come out with something. I’m surprised Injora is still cranking out upgrades for this platform, but it means people are buying them, I have 6 trx4m, and lots of Injora upgrades on them but I’ve got them to a point where I’m happy with the capabilities. Happy R/Cing !!

Wish these were available when I started building 24’s!! I would have saved a heap of money

@CapeCrawlers

12 күн бұрын

Right?! You can save money on the next generation of builds 😁

How does it compare to the Furitek Micro Komodo + Lizard Pro? I’ve decked out my TRX4M with everything except electronics, and want the best slow crawl on the market. I’m leaning towards Furitek because of the Bluetooth esc settings, and the fact that the Injora system is $60, making me a bit skeptical as to its performance compared to the Furitek.

@timroder6745

12 күн бұрын

Go buy the Furitek. I've got multiple Furitek Products, yes they're pricey but it absolutely superb stuff you're dealing with

So, the ultimate question. Is it better than the Furitek Komodo combo?

Will that injora brushless setup work with the tarantula chassis? Also What else do I need?

@CapeCrawlers

13 күн бұрын

Yes it will. You’ll need an aftermarket radio and receiver. The Injora radios will work fine. LGRP makes a good inexpensive one too.

Bummed me out when it failed. Will wait a bit to see when it gets ironed out😢

Did you build or buy your indoor course? I just got into mini crawling and was wandering

@CapeCrawlers

12 күн бұрын

I built it. I’ve got a video on how I did it on the channel

Annnnnd it's already sold out. I should have bought it sooner but I wanted to see what you thought of it first. Guess I will have to wait until the next batch. Price point is insane and is definitely going to make other manufacturers out there think.

@ishaqnadir7809

12 күн бұрын

I would honestly keep waiting just a tad longer, I heard their working on waterproofing the esc with an updated version pretty soon which is what I’m holding out for

@18:58 what is that? for a moment I thought it was some ghostly figure

I want it!

Ya know, I do, eventually, want to get this for my TRX4M Bronco, but my question is: what kind of battery will I need?? Other than that, am quite interested in this kit. 🤔

@RCRookie805

13 күн бұрын

You can use any battery. Comes with few battery adaptors.

@LMH710

13 күн бұрын

You can use the battery what the Trx4m came with

@UNDEADGERBIL

13 күн бұрын

I didn't see an adapter for the original battery

@LMH710

13 күн бұрын

@@UNDEADGERBIL look at it on their website

@DEENRC

13 күн бұрын

Wait till you see what furitek got coming soon... their going to the next level..😄👍

WOW ‼️

I'm wondering how this compares to the Cedar Torpedo system.

@CapeCrawlers

12 күн бұрын

Feels very similar in how it delivers power but it has significantly more wheel speed

@MrsRabbit8

12 күн бұрын

​@@CapeCrawlersthank you, much appreciated, and the price is great! I'll use this one for my standard crawlers, and the Cedar for super dusty or muddy environs.

Do you need a PC for it to be tuned?

@CapeCrawlers

13 күн бұрын

Yes, as far as I know it won’t work with a Mac

@CalebKirchoff

13 күн бұрын

@@CapeCrawlers Ok thank you

Water proof?

So many people are going to destroy their batteries with this system. LVC is off by default, Injora either needs to set it to on during production or include instructions how to do so. On a side note drag brake can be adjusted the setting is called Stopped Brake Level its a slider from 1-10.

🔥🔥🔥

Have a new build currently and will not be going with this seems way to involved for an rc car injora just trying to shortcut and save money

It’s a shame that there are sold out now.

Please throw the injora combo in the trx4m monster truck

So you do a review on the motor but not the new body that came out

Nice Nice

So much less voltage drop on XT30 versus PH2.0

What TX are you using?

@viperfangs4848

13 күн бұрын

It's a Radiolink RC8X transmitter and a Radiolink R4FGM receiver.

@benjamin3769

13 күн бұрын

@@viperfangs4848 Thank you!

@viperfangs4848

13 күн бұрын

👍🏼

Gotta say im a bit disappointed. Performance looms fine and the proce is okay. But the entry kevel furitek combos arent much more and have Bluetooth programming and smaller escs

@malcolmlester4585

12 күн бұрын

youre right and smaller esc, replaceable wire harness, integrated on/off switch, no silly seperate adapter plate, plus they come with a receiver so you dont have to replace the factory radio.

It's a good motor, but no one has time to go on a laptop and program. Everything are they waterproof motors to

Those shocks are holding it back.

สินค้า หมดแล้ว 😅

If only it was waterproof

Xt30 is not a wonky connector. It should be used on everything small scale… now everything else they included is wonky

@CapeCrawlers

4 күн бұрын

I have a heck of a time finding anything to plug into the XT30

@Rckid28

4 күн бұрын

@@CapeCrawlers strange, I can’t find anything else… and if I do, I solder one on!

They lost me at the rats nest of wires to program it

It looks like it hasn’t enough torque for slow crawling, because almost every obstacle it passed with the punch. For the indoor course it is the worst result I’ve seen on this channel, considering that this wasn’t box stock rig

It looks cool but a bit stone-age now plugging into a PC. The Furitek uses Bluetooth and App. So much better.

@brendankohlheim7372

13 күн бұрын

But for $60 I wouldn’t mind

@josiahrivas5827

13 күн бұрын

Furitek is also double the price

@ClassicIronAddict

13 күн бұрын

For the price it sure seems fair too me 🤷🏻‍♂️

@crawlstockrc

13 күн бұрын

@@josiahrivas5827 not everyone has a computer these days. Everyone has a phone.

@ckrxx644

13 күн бұрын

I'll plug it into a pc and save my broke ass some money. I can't be lazy I cost myself money 🤣🤣 that's how I look at it. If I was rich than sure lol

Okayyy... guess you don't take valid criticism "like a champ"... clout and keeping your sponsors happy is more important, it seems... geezus... 🙄

@Tipaj_

13 күн бұрын

Yo, sorry to interrupt but Can you please explain

@viperfangs4848

13 күн бұрын

Wrote some criticisms on his testing methods, but he erased the comment pretty much instantly...