Make sure to check out the Hypervolt website to see their amazing products🤩- bit.ly/HYPERVLT

@walton909

9 ай бұрын

Their software is buggy as hell. No Octopus Go integration either.

@hypervoltev

9 ай бұрын

@@walton909 We've had Octopus Go integration for a very very long time, and remain the industry's highest rated brand. Of course, still a lot of work ahead of us, but perhaps a fairer comment would be in order

You started something now. We need a drinking game when Jordan says “rear entry” 😂

Vandalism is likely to significantly increase as more EV chargers appear on streets and in front of homes. Therefore, damage mitigation to EV chargers is a serious point.

No need to retool for screws. Just add nailon washer.

Request a quote from Artisan Electrics here - app.openquote.net/company/artisanelectrics

So IK 10 rating is 5KG from 400mm high using a drop hammer in a test or 20 joules of force. As you shown, it won't stop a sledgehammer with someones weight behind it swinging it. 🤠👍

Anyone choosing an EV charger now needs to get one that's compatible with Intelligent Octopus. 6 hours of off-peak at 7.5p, and 15p export. Sadly the Hypervolt is not compatible despite all their customers asking for it for years.

@baldelectrician

9 ай бұрын

Yes, I agree Currently I have a 3 phase supply at home (needed the supply upgraded as it was a 1953 PILC lead cable which was not capable of supplying property) 😀now SPEN just finished a 3 phase 80A supply I have Octopus Agile and my Zappi links to Octopus and is currently charging my Eddi (water heater) and Zappi tonight automatically when the cost drops below 2p per Kwh (I can change that amount daily to charge my van on the cheapest cost automatically)

@Ian-xq4rt

2 ай бұрын

This is coming later this year

SD cards are pretty indestructible to be honest. I lost my drone in 5ft of water in a river. 89 days later and once the river level had dropped to 2ft., I retrieved the drone, let the SD card dry out overnight and the only footage I lost was the the clip that was being recorded at the time of the crash. I was amazed. The new charger looks good though.

I love your work and Try to damage it. Great work video! Thumbs up! Cheers! 🤟

Always nice to have space for rear entry...

There is a charger at my local supermarket that has had the charging cables cut off by vandals, no doubt the cables will be sold on as scrap. After this happened twice it looks like the owners have given up and not replaced the cables. Looks like some work is required making these charging points more durable

Im sure itll probably work but youre not supposed to expose and untwist cat5 cable. The individual conductors should be as short as possible into the plug technically

Oooo look! Thanks Hyper-Volt, even easier to pop that cover off and get to the SD Card to clone the contents off of it!

Would of be good to tell us what the main differences are over the Hypervolt V2? Also does it work with Octopus intelligent been waiting for that integration on my Hypervolt V2 but hasnt happened 🤔

Outstanding as always nice one 🇨🇮😎

@artisanelectrics

9 ай бұрын

Thank you! Cheers!

Mad video. Watched it on my iMac while eating a cheese baton. love it bro!

@artisanelectrics

9 ай бұрын

Glad you enjoyed it 😎

Bomb proof, until their servers go down and you cant enable charging at all

I’m more than happy with my Hypervolt 3 Pro, it’s also got an easier life than what’s been shown here.

"Next on the Hoodraulic Press Channel, will an electric car charger stop the press?"

How do you find the app? The kit looks amazing though there are complaints of it being buggy and needs resetting a lot

Watch those soffits guys, they looked a bit like asbestos cement sheets - damn stuff is everywhere in the UK still and were used for soffits on houses built in 70's to late 80's

@artisanelectrics

9 ай бұрын

Thanks - good shout

@markrainford1219

9 ай бұрын

Asbestos cement sheets are relatively low hazard unless you start angle grinding or sanding them. My local council even lets you take them to the local tip with no restrictions. But yes, be aware.

@barrieshepherd7694

9 ай бұрын

@@markrainford1219 You are lucky - my council treats them as atomic waste. You cannot transport them anywhere, you have to book special transport and their bio-hazard bags. You must double bag it then wait for the special transport to collect. Whole process is time consuming and costly - I think it cost £200 when I had my soffits upgraded to plastic

@markrainford1219

9 ай бұрын

Oh dear. All we have to do is tell them what time we will be there.@@barrieshepherd7694

@avocet89

9 ай бұрын

Book yourselves on an asbestos awareness course, the places you can find it in older houses is crazy. Best to be aware and safe.

Apart from the modified case it looks just like my Hypervolt 3.0, which I've had since May.

@artisanelectrics

9 ай бұрын

Lots of improvements and the new V5 app is gonna level things up even more

Flippin' 'eck £110 for a full valet, bit steep mate!😅 Fun test though, enjoyed it, cheers Jordan.👍

@artisanelectrics

9 ай бұрын

Glad you enjoyed it

Make a video just about the DNO SUPPLY to that house and how if you’re having a new meter installed the supplier won’t install a DP isolation switch.

Thank goodness it flower proof 😂. Nice vlog 👍

@artisanelectrics

9 ай бұрын

Thank you 😁

£110 - I nearly choked to death lol

@artisanelectrics

9 ай бұрын

LOL me too

@markrainford1219

9 ай бұрын

Was he not talking Romanian Leu?

Looks like a nice product. I have PV and a home battery, so it ticks those boxes. However, when will it have Octopus Intelligent compatibility?

You mention that it can host two CT Clamps for Grid and Solar is that correct? Trying to decide between this and Zappi, any advise on that for use with Solar? Impressed by Artisan Electronics skills and service. Thanks

Like the dubstep music!!!!

Is there any other car charger other than zappi that works with solar/battery storage and harvi kind of equipment.

Excuse me, did Jordan just say "the cable sticked out more"?!?!?

@sukhi17

9 ай бұрын

Don't know what your on about mate. You haven't put a time stamp unfortunately 😕

@artisanelectrics

9 ай бұрын

Yeah I did 🤣

@M1Cr0sOfT

9 ай бұрын

@@sukhi17 10:04 found it mate

@sukhi17

9 ай бұрын

@@M1Cr0sOfT 👍

Gonna guess you were near to Lakenheath and Mildenhall, with all that jet noise

Convinced me, ordering one.

Does the CT clamp work over WiFi or does it have to be harder wired to the charger?

Also it may be IP66 but the connector is not, at best it will be IP54 when, and only when, its connected to a matching socket.

Do hypervolt have three phase version yet? Amount houses with three phase now they missing out I’ll keep installing 22kw zappi

@artisanelectrics

9 ай бұрын

On its way I believe but not available yet

I love your work and you’re a great boss

@artisanelectrics

9 ай бұрын

Thank you so much 😀

How is any of that better or easier for install - theres now more components to fit and more screws on the covers how is that faster for install? - as for its packaging for easy install wtf fits the decorative front cover first - LEDs look brighter as a plus never been back to any of the old ones for water ingress was it in issue before ?

£110 for a car wash! Hope you got a vat receipt for the channel. Looks like a good bit of kit, nearly upto zappi levels of functionality. Had a thought, if you wanted to only run this at 100mb you could just use the orange and green pairs punched down to 568b, and use the other two pairs for ct remote connections.

@aaronmdjones

9 ай бұрын

Yes, you could do that.

@artisanelectrics

9 ай бұрын

Yeah we do that sometimes it works well

@markrainford1219

9 ай бұрын

As if these car washes are VAT registered 😂. I bet he was told to say that much because that's what Jordan puts down in the books.

What was the thought process behind leaving slack for an RJ45 and not terminating it?

"It's designed so that you take out the part that you need to install first " ? , and then you take out the part you need last !, what am I missing

@aaronmdjones

9 ай бұрын

He did say that this isn't the final packaging. We'll see.

Are you 3 people + a cameraman putting up one charger?

Nice job...but disappointing to see Hypervolt still using non maintenance free screw terminals.

@artisanelectrics

9 ай бұрын

How very traditional of them LOL

660 quid for a charger is quite expensive. Whats the maximum rated terminal size on that PCB. The charger may struggle with handling SWA

£110 for a jet wash! I presume he was joking! Is 4mm cable on what might be a 7KW EV charger OK? (7KW x 4mm x 10m = 3.35V drop = 1.5% loss). I see you are using the new fire rated cable clips, which look very neat and tidy. I did wonder about the asbestos sofit boards too, after all, drilling a hole through one might not be healthy. I am thinking of replacing all of my sofits with UPVC cladding, partly so I can look the insulating on the top of the wall and cavity opening - also, saves painting them every few years.

so if you wanted to put an RJ45 on the cat5.... what would you use for the CT connection?

@FFT_Electrical

9 ай бұрын

RJ45 for ethernet only requires 2 pairs, CT 1 pair and 1 for good luck

@aaronmdjones

9 ай бұрын

You only need 4 pairs for gigabit. 100 Mbit/s Ethernet runs on 2 pairs.

@MrBinabanana

9 ай бұрын

Officially, you can't. Some electricians may say you can use two pairs for 100MBit/s half-duplex ethernet and use the remaining pairs for CTs, but telecoms engineers would strongly advise against it. Whilst it may work over shorter runs, it should be considered a bodge and not relied upon because it deviates from the standards. Entwining the CT's electrical signal with the Ethernet will do nothing for data integrity, especially over medium to longer runs. It's a massive oversight with EV Ultra in my opinion - either you have CTs or Ethernet but no combination over the same UTP can be considered standards-compliant.

@aaronmdjones

9 ай бұрын

@@MrBinabanana The whole reason wired ethernet over twisted pair uses twisted pairs is that they become immune to mutual interference (what affects one conductor in a twisted pair will also affect the other to largely the same degree; keeping the voltage between them the same as without interference). A CT typically has a turn ratio of 2000:1, meaning that when it's measuring 100 amps flowing through it, it's transmitting 50 milli-amps on the CT wiring. There is no way in the world 50mA RMS, or even 100mA RMS if you had 2 CTs, is going to interfere with Ethernet over twisted pair to the extent that it wouldn't work. I bet you wouldn't even observe a measurable increase in the incidence of frame errors. Even better still, many CTs have their burden resistor on the CT side and transmit only a voltage difference -- exactly the same thing Ethernet is doing over exactly the same wiring. Unless the current use of the property is ramping up and down from practically nothing to practically max several times per second, this isn't going to cause any interference at all. None.

@MrBinabanana

9 ай бұрын

@@aaronmdjones So basically, what I said. You might be able to get away with it, but it’s not standards-compliant. To be honest, I wouldn’t want to be in a position where I’m betting on a greater or lesser incidence of frame errors - I want to be in position where I’m simply doing things correctly by following the standards. They’re standards for a reason and anything else is a bodge.

Hmmm, get Johnny No Neck to jump on it and I'd be utterly convinced. Does look like a good charger.

@artisanelectrics

9 ай бұрын

😂😂😂👍

have you taken a emf reading next to one of these ?

@artisanelectrics

9 ай бұрын

I didn't want to get too close...

Should I go for hyperVolt or zappi? I wont be using solar but i want something to keep cable tidy and hidden

@hypervoltev

9 ай бұрын

We offer you a built-in cable management solution, so you can always neatly wrap the cable around the unit and keep it clean, nice and hidden. On looks, it doesn't really get better than hypervolt!

Unless you got a van. Personally why would you mount it low enough that you could reverse into it?

@artisanelectrics

9 ай бұрын

Haha true

Re you sure those were DNO feed ins? I thought all DNO cables had to be external. (Up in the loft would be good place to tap off power 😂😂😂😂) When I saw them I thought they were TV antenna co-ax cables.

It is IP66 Till you drill a hole into it. Are you 100% sure you re-instated it back to IP66. What was the IP rating of the stuffing gland?

@artisanelectrics

9 ай бұрын

IP66 for the Wiska stuffing gland also

Why would the DNO run cables into the loft? They just connect the main cutout to the meter

@markrainford1219

9 ай бұрын

Overhead supply presumably.

All Artisan installs of these Hypervolt units would be a fail in the ROI 🇮🇪 where a isolator must be installed , common sense really ☘️😊

Hope you can get to your charity calendar goal

Ideally you would need to use a ceramic screw driver when moving a potentiometer. But they could have used some plastic cap to use with your hands or any screw drivers

@mfx1

9 ай бұрын

Rubbish, it's a switch not a potentiometer and ceramic screwdrivers are only used on trimmer capacitors not resistors as metal nearby can affect the value, completely pointless for potentiometers or switches.

@max246

9 ай бұрын

@@mfx1 it looks a multi positions pot.

@mfx1

9 ай бұрын

@@max246 It's a switch, either way you don't need a ceramic screwdriver unless it's a trimmer capacitor for an RF circuit.

Sd card test is a bit flawed 😅 if electronics aren’t powered they can be dunked in water because theres no electricity to start the process of electrolysis

Do I have to unravel the cable before charging

Jordan, did you drive through Barnet at the weekend? Could have sworn I saw you driving a white Tesla model 3 behind me!

@artisanelectrics

9 ай бұрын

There are a LOT of white Tesla's out there nowadays LOL

@mattmanslim

9 ай бұрын

@@artisanelectrics In that case, there’s a Jordan impersonator out there who is very dedicated to the cause!

They finaly moved from a GCSE prototype to a finished product, in my personal option the first version was total TRASH this looks like a finished product. Worth noting the impact rating part of regs IK10

@artisanelectrics

9 ай бұрын

The new Hypervolt is a big step up from the previous versions

@NicolasRaimo

9 ай бұрын

@@artisanelectrics agree it looks 1000% better than last unit

The other thing people used to identify as an issue was multi-users logging into a single HV charger. Has this been resolved at the same time as all the upgrades?

@wuuubbits

9 ай бұрын

why tf would you have a logging in system for a charger?

Always good to have space for rear entry 🤣

@artisanelectrics

9 ай бұрын

😂

@barrieshepherd7694

9 ай бұрын

Rear entry removes the risk of babies

Five star electrician and use fruits @12:44 🤭

I will pay you not to do a Calendar lol

@artisanelectrics

9 ай бұрын

Perfect 😅

Still awaiting the app to change from pounds sterling to dollars for international customers…..only been waiting 2 years!!

Great big middle finger to HV2 owners, still no Octopus integration, no support for multi price tariffs and much more

@artisanelectrics

9 ай бұрын

Yeah the new Hypervolt is a big upgrade tbh

@hypervoltev

9 ай бұрын

We have had support for multi-price tariffs for a long time, just as well as supporting every Octopus tariff except Intelligent. As much as we are extremely grateful to the many many V2 owners, companies have to continue investing into R&D and making better products, giving customers a better and better platform over time.

Its a great charger, but the customer service is abysmal. I have told them to remove me as a trusted installer. Their poor customer service reflects badly on the installers who are their lifeline.

@artisanelectrics

9 ай бұрын

Really? I have always found them to be good when I have called - they answer quickly which is a change from most manufacturers...

@TimmyBoja

9 ай бұрын

@@artisanelectrics They do tend to answer quickly, but there is a disconnect between the customer service and the technical department. They are the only company who I video all my work for - because they have repeatedly proven to be underhand. No trust there at all for their "trusted installers". They are now the only brand that I refuse to install, but unfortunately, I still have a commitment to service their devices for me existing customers.

@timprice5

9 ай бұрын

I can't possibly imagine why they'd answer the phone to Artisan immediately, you know that company that has the power to fundamentally change the design of their chargers and has a massive KZread following 😂

Hey Jordan, just wondering what was that tool you used to cut out the extra shavings from the 20mm hole in the charger? Looks a very handy tool…

@williambell8875

9 ай бұрын

A deburing tool mate

@ArchieHinde

9 ай бұрын

Spot on mate cheers

@artisanelectrics

9 ай бұрын

Bahco Pen Reamer: amzn.to/44RosIk

Rishi cuts back on Net Zero so no more EV chargers no more EV charger subsidies.

I hope they fixed the atrociously bad wifi issues from HV2 units.

@svdleer

9 ай бұрын

I would hardwire anyway.

@artisanelectrics

9 ай бұрын

Yeah the WiFi is amazing on these - connects instantly and ping is super fast

@mrhumbug5353

9 ай бұрын

My Hypervolt 3 is in a location where the signal is around -70dBm and it doesn't have a problem. It only has a 2.4GHz radio

🤘😎🤘

You ditched the Tesla for a ID.3?

It was marv, not merv 😂

Asbestos soffits? 🧐

Jordon, did you realise that your employees unintentionally revealed the whereabouts of the householders two gun safes in the cupboard at 7:53 Anyone local I'm sure would recognise the property. I'm sure the local "Police" / "Firearms licencing officer" is happy with you showing the location of the gun safes etc...

@stuartgreen7203

9 ай бұрын

Jumping to conclusions there. Having a gun safe doesn’t mean they have guns. I know someone who installed a couple of big gun safes for high end photography equipment for insurance purposes. Was interesting getting them into his car! Was a tad heavy 😂

@i_know_youre_right_but

9 ай бұрын

Let’s be honest here, nobody that watches this channel is going to have the bollocks to try and steal firearms from someone’s house🤣

@Overlord-UK

9 ай бұрын

​​@iknowyourerightbut6806 Your jumping to conclusions there, who said anything about anyone stealing anything? In my comment, I was implying the firearms licencing officer is likely to confiscate any firearms, ammo and revoke the firearms certificates etc. One thing you're expected to do when you've been granted a "FAC" is Keep the firearms & ammo safe, secure and hidden from view etc...

@Overlord-UK

9 ай бұрын

​@stuartgreen7203 ​In my comment, I was implying the firearms licencing officer is likely to confiscate any firearms, ammo and revoke the firearms certificates etc. One thing you're expected to do when you've been granted a "FAC" is Keep the firearms & ammo safe, secure and hidden from view etc... If there's no firearms or ammo involved then there's nothing to worry about then is the? End of...

@markrainford1219

9 ай бұрын

Pretty safe assumption I'd say. One long safe and one short ammo safe. 🤔@@stuartgreen7203

Customer views Hypervolt after video release...see Jordans Footprints all over the unit....

@artisanelectrics

9 ай бұрын

Hahaha 🤣 don’t worry wasn’t the same charger

@kinkam5516

9 ай бұрын

@artisanelectrics lol...in that case can I have it and I'll pay the £50 for the replacement cover and delivery cost please??? I have a hybrid..but don't have dedicated fast charger :)

Is there a 3phase version? Otherwise its pretty useless

Spend £22 on some proper Allen keys!

what about a hammer attack

.

@markrainford1219

9 ай бұрын

Hahaha good one 👍

So Jordan how much you charge to put in a Power Shower and how much you charge to put in an EV charger .A Power Shower defo ain’t £1800. Might be why Rishi dumped Net Zero all us Brexit voters and quite a few Remainer can’t afford it .

SOTA Electrical just rubbished your video

@colinhick2554

8 ай бұрын

Rubbished, or pointed out inaccuracies?