I'll wait for the 20 dollar ebay knock off 😅

@crinner73

Ай бұрын

Just looked at the price. I'm waiting. Know a guy who could make it.

@jacobcarmona9118

27 күн бұрын

I mean anyone can make it probably be easier with a spring at first to get the rest of the ergonomics then work on adding a spring the material around the hinges had to be able to take some abuse

@crazyweirdperson

26 күн бұрын

Eh I’ll just wait for the 3D print that’s free

@jacobcarmona9118

26 күн бұрын

@@crazyweirdperson you right I don’t use them tbh maybe I’ll try one also probably wait for a 3-d print

It damn sure ain't worth $110 plus shipping😂

@trev9168

Ай бұрын

U serious? Wtf

@heywoodjablome2018

Ай бұрын

​@@trev9168crazy right? The gun community gets robbed without a gun every day.

@jersey8650

Ай бұрын

Evident by the comments sections on these gun videos, gun fetishists aren’t exactly the brightest group of individuals. Easy targets for overpriced, mass produced gadgets and shitty novelty products. You see a lot of that in gun culture.

@phelaar

Ай бұрын

For real???? 😵😵

@basher5285

Ай бұрын

The gun industry is getting so fucking expensive for no reason.

this should be a $30 part max, you guys overcharging

Looks easy enough to 3D Print.

See.....now that actually makes sense.

@bunkeroregano9492

Ай бұрын

Not really, a tight grip fixes the need for this, I swear you people either just complain about actual useful stuff or the 1 thing that doesn't need to be done all of a sudden is ground breaking aperently

@printingwithpeek4897

Ай бұрын

@bunkeroregano9492 Bro, it gives it a point to apply a downward force rather than just a good grip and it doesn't get caught up on anything. You're dumb as hell

@carbon8ed

Ай бұрын

@@bunkeroregano9492 Why are gas pedals so ubiquitous in high level competitive shooting?

@analogueoverdigital929

Ай бұрын

​@bunkeroregano9492 answer his ? Mr crickets. Why are gas pedals used in comp shooting so much 😭 😂

@DocHudson420

Ай бұрын

@@analogueoverdigital929they are used in open. Not in comps with normal guns

$110 is crazy tho 🤣

@Huhmasta

Ай бұрын

Totally not worth it

@lucasc5651

Ай бұрын

In fucking sane

NOT for $110 they’re not! I was expecting somewhere around $50, which I would have paid, because it’s a small piece of aluminum that costs $5 to make in materials and labor… maybe $10 to make with the CAD and machining tools per unit. If they lower the price on these by half, I would highly consider it!

They saw the Antimatter Wing and said "Hold my patent."

@kobe5rings

Ай бұрын

Yup crazy. They matter it worse 😭

@datboi__

Ай бұрын

It's way smaller and better. And you don't need a light to use it

Well that looks interesting. Id like to try that

Funny part is gas pedals aren’t even for recoil control, but more of indexing. Trying to control recoil like that, by adding a leverage point to one side of the gun will result in inconsistent pressures that will not be repeatable.

@bluffcityquietpills

Ай бұрын

Came here to say this in less words but you are 100% correct ✅

@TheRhinoAutobot

Ай бұрын

I thought it was good for faster follow up shots. Not felt recoil reduction

@larperator

29 күн бұрын

" inconsistent pressures" Do you not have a support hand that grips the gun tighter?

@AIRBORNE916

17 күн бұрын

@@larperator that has nothing to do with changing the axis of the gun which is what applying pressure to a gas pedal does

GUNS & TACTICS, Subscribed because your videos are so much fun!

Now that's something innovative and simple.

Finally. A usable gas pedal for M&P 2.0.

Finally as gas pedal for the 2.0!!

That's awesome among the light rail, the suppressor hight sights for a suppressor I dont have, and the extended magazine, there just wasnt enough stuff to hang up in a high stress situation. Is there any way to sharpen that thing so it can notch the inside of my holster and maybe cut me too?

On smaller frames, such as the P365 X macro, pedals make a big difference. Have one, but holstering is an issue. Definitely trying one of these.

My 1911 double stack says make soul removing holes in the direction of threat and let recoil be your friend.

I have one on my SIG P365. I've got their size #3 version. It makes a huge difference in muzzle flip, and keeping my dot on the target. I did have to take a heat gun (20 seconds) to both of my Kydex holsters though to get it to fit properly within.

@icallmy12gnot12

Ай бұрын

How much did you pay?

@paladinanderson8433

Ай бұрын

Get used to it. Rely on it. Fail without it.

Guys he used the word modular, so you know its good!

It’s like training wheels on a bicycle

@greggweeks3504

28 күн бұрын

You couldn't pay me to stick that on any of my handguns.

I need this!!!

I'll have to try it, sounds logical but I'll have to see if it's practical for myself to add another piece to a carry piece , I general believe in KISS.

And there went that one time a toothpick from Applebee's you THOUGHT you flicked off . Ricocheted back, fell in between your holster and recoil thingy which then prevented you from drawing and being the Sunday hero.

recoil control comes from the support hand pinky. it's leverage that reduces recoil.

@Charles-A

Ай бұрын

It is another point of contact and leverage for your suport hand helping with muzzle rise in a similar way a C clamp grip helps with recoil control in rifle shooting. A full grip is not something comprised of a single element overshadowing everything else; everything plays a part, and this allows your support hand's thumb to play one instead of just not obstructing.

110$ ya outta ya damn mind

Rainier arms.......I remember picking up parts from them will call when the were next to REMPT motors and didn't have show room.

whaaaaat thats pretty dope

It’s crazy how the firearm community thinks because they cut something on a CNC that it’s somehow worth 110 bucks. You could sell these all day for 40 to 50. I would pay 40 bucks I wouldn’t pay 50 but I know a lot of people would. It’s just like how the weighted mag extensions are also anywhere from $60-$75 a piece. So how do you solve it? Well, there’s a couple different ways. You can take one of the pieces that you already own to a local machine shop and have them make you, what you desire. Or you can source overseas parts. There is no difference between a piece of aluminum cut and America or a piece of aluminum cut in China. I don’t like it either but I’m not going to pay $100 for a two dollar piece of aluminum.

@Kevin-fj5oe

Ай бұрын

CNC is quite expensive when you don't bulk order, or just get custom cnc job in china which is just as good with whatever material you want.

@RichardCranium321

29 күн бұрын

There's definitely a difference between the aluminum cut in US vs the one cut in China... For starters, we know they're not cut by slaves in the US and we also know it's likely to be real 7071 aluminum and not some pot metal that just happens to feel like aluminum. You ever bought charging handles made in China? I have... They both snapped off at the front around the gas key hole after one range trip. I'm not saying these are worth $110, but they're guaranteed to be infinitely better than ones made in China and at least the money stays in the country this way.

Never seen those they look like they probably work pretty well.

Push down on the take down while firing! Slide comes off; no more recoil!!!

That thing looks like it will snag on your holster preventing you from drawing your gun.

Wont recoil break the hinge quite quickly?

Odin armory came up with this first.

@tallcip65

Ай бұрын

Cross armory has had this since like 2010

Practice helps you control recoil as well.

Cool

how long before it breaks at the hinge

Sick

Shut up and take my money !🤑💰💰

wonder how long until the atf comes knocking on this one.

Does it fit canik

It's called command grip. Use it.

I been looking for one for the glock 34

But, do you make one with a punisher skull on it?

If it replaces the take down, how am I supposed to disassemble the firearm for maintanence?

Rather stipple than block takedown

JB weld and some hockey tape is the same thing

Yeah that’s def gonna break in no time flat

Whoever named it gas pedal should have called it the brake pedal. That and the $100+ price ...

Does it interfere with function, as by replacing the takedown lever with something you push down it feels like it would that impede on reliability? Does anybody know more?

This is like the 3rd or 4th iteration of a "low profile folding gas pedal thats compatible with holsters" I've seen.

Some kid is gonna re model and print this

Listen man I’m not a fudd but I’m starting to see how they become what they are.

This is cool, but I don’t know how I feel about getting to the point where I rely on it. Putting enough rounds through a pistol with that thing would almost rewrite your muscle memory I’m sure, and if it breaks or you decide to do a little field recovery and pick up somebody else’s, you’ll be out of your groove.

I still feel like I could easily put my thumb along the slide and cut my thumb if I'm trying to pull and use my gun quickly and under duress

Outside of competition I don't see this being necessarily a great thing. You get dependent on having that and have to defend yourself with a different gun or a one hand or sub optimal grip and many guys will fall apart.

Lifetime warranty for when that tiny hinge breaks? For that price, it better.

I’m going to get ghod pro my p07

I hope it's made out of plastic like the other gas pedal I bought so it can break within a few shots.

I wonder how durable it is? That hinge looks like a potential failure point.

My p320 got a gas pedal that is all metal and it wasnt 100$. Cost me 60-75$

Where is Rainier arms now that Inslee has lost his mind?

Yeah it’ll be great until dirt, or dust gets into the hinge and inevitably ends up breaking, and will end up getting someone killed when their gas pedal doesn’t deploy and they rely on it to control the recoil of a pistol.. just buy a gas pedal and a holster that supports gas pedals?

ATF will try to reclassify it as a forward grip.😂

If your R&D cost so much to charge $110 it is time to sell the patient. I don’t see a flood of people paying $100 for this item. $40 feels fair. Also. I be extremely worried about this item snagging in a holster. Kinda cool though.

I've been emailing companies for 13 years... asking them to design these things. Antimatter makes a better one tbh

ATF: 👁️👄👁️

Me expecting a accelarator pedal

Why’d he pull that out so aggressive

GoGun gas pedal is half the price and way more effective

Gimmick

How does it work left handed if the slide lever is only on the left side of the gun?

@TexasPapa13

Ай бұрын

There’s a left hand model available

@michaelhoskins2581

25 күн бұрын

​@@TexasPapa13 my thought was: how much would it interfere when shooting with your support hand

@TexasPapa13

20 күн бұрын

@@michaelhoskins2581 good question

Then, how do you take the gun apart for cleaning?

@TexasPapa13

Ай бұрын

Push in the side on the gas pedal lever then take down as normal.

Gimmicky

What’s the point of a gas pedal? Why wouldn’t I want the least amount of recoil?

Think the whole gas pedal thing should be relegated to the competition world. I like mostly stock defensive guns.

What a gimmick. That'll break right away.

They put a hinge on the side of your gun only the price of a whole door

Everyone is into gas petals. Literally the first time I have heard about them.

Solution to a problem that doesn't exist. Tip: keep training, focus on fundamentals. Question, why Gas Pedal?

If it stops recoil it would be a brake pedal not a gas pedal

Shut up and take my money!

Can’t wait till they ad this to warzone

Solutions to problems that don't exist! Practice controls recoil.

If you need this for recoil to hit a target you need to be shooting a smaller caliber

This isn't a gas pedal this is gaslighting

UNTILL atf de decides it's technically a grip and since you cant put a grip on a pistol without pissing them off

$100 solutions to problems that don’t exist…. But they’ll make some money off of it

Not a gas pedal, it should be called "The Brake Pedal" because it holds back recoil with other hand?!

Mhmmmmm

Us lefties are left out

Just get a px9 that take down is big enough to be a gas pedal🤣

ON TODAY'S EPISODE OF USELESS ACCESSORIES 😂😂

@heywoodjablome2018

Ай бұрын

Not to mention it costs $110 plus shipping

@andygold

Ай бұрын

It was a lot of money, but it allows me to keep a good grip on my P365 with my support hand which has issues. Follow-up shots are much much quicker and my dot stays on target between shots. A bit high in terms of price, but well worth it, at least for me, with my circumstances. The ability to empty a magazine (if necessary), in a few seconds, with all rounds in a tight cluster makes it invaluable.

@Brainwashed_Sheep

Ай бұрын

@@andygold Hey thats awesome !! That's a very good, real world application of how it should be used! I'm all for designing and creating better accessories for those with physical limitations/ disabilities/ Veteran's etc. We all deserve the right to protect ourselves quickly and effectively

Pass

No way that fits in a holster thats make/model specific.

Is everybody into gas pedals. 🤔

Dudes, anyone try this?

Really cool, but not $110 cool.

Temu will have one for .50 cents

Yes. Thank u. How much. Shame on them

Somebody 3D print these and sell them for $30