Dewalt has finally released there new gun but it's heavily back ordered and kind of hard to find. amzn.to/3K8mug2 back in stock.
Жүктеу.....
Пікірлер: 90
@Palpac11 ай бұрын
The guy who's got to mud over all those extra screws😂
@bobseguin2195 Жыл бұрын
I like the change of the forward/reverse switch as well.........
@csdrywallhawaii Жыл бұрын
amzn.to/3K8mug2 Back in stock order soon they go pretty fast.
@reddragons5179 Жыл бұрын
That's gonna be you're new favourite looks great!
@defy2598 Жыл бұрын
somebody demoing that corner is going to lose their mind
@AndrewShafer Жыл бұрын
I'm glad they changed the forward/ reverse switch, I'm always bumping it by accident on the old one. The new one looks so much smaller too, can't wait to try it out. Thanks for the video Memo!
@cornyfehr1094
Жыл бұрын
That's crazy man it's so weird ppl have different taste I'd waaayy rather have a faster forward and reverse switch then the impact switch on a screw gun
@AndrewShafer
Жыл бұрын
@@cornyfehr1094 I can see that, I guess I don't usually use reverse on it. I keep the m12 in a holster in case I have to pull a miss
@cornyfehr1094
Жыл бұрын
@Drew Shafer if you are using the screwgun for drywall u can pop the nose cone off hit reverse and apply a bit of pressure against the missed screw and swiped it left or right either way it will losen up and then u just grip with you're fingers and away u go
@AndrewShafer
Жыл бұрын
@Corny Fehr Yeah, I took off the nose cone in favor of the collated screw attachment. It's a pain to remove, and quicker for me to just switch to the mini impact. We need a stud sensing nose cone to eliminate misses entirely
@tombrown03
10 ай бұрын
I cut the forward/reverse switch off because it was SO annoying. With the magazine feed attachment, I never put it in reverse anyway
@jamesD104Ай бұрын
Good review thank you.
@olgajoachimosmundsen4647 Жыл бұрын
Would have loved a big trigger for forward, and small for reverse instead of having to change the mode. I've used the old Dewalt, and find the switch there to be much easier than to change the direction switch on the Festool which is high up on top of the took
@alainruiz Жыл бұрын
Super helpful. Thank you!
@drcurby Жыл бұрын
favorite saying in a reno. "taper can fill that" ! 😅
@Adam-gi1yl11 ай бұрын
Nice review 👍
@debandmike338011 ай бұрын
I'll bet they did away with the reverse switch cause of to much wear and breaking, and went to thicker button for longer llife. This is a good gun with the N7.
@edover50 Жыл бұрын
Oh man….do you know how much it costs me when you make these videos?? Lol
@cornyfehr1094 Жыл бұрын
The gen 1 is also brushless
@josephdg1429 Жыл бұрын
Where did you the collated attachment on the Dewalt drywall gun
@SalvageRevival7 күн бұрын
Whats the end called holding the screws.. what model number is the end. Thanks
@benfuhler9556 Жыл бұрын
They don’t need to worry about the strength of that wall
@csdrywallhawaii
Жыл бұрын
We prefill with hotmud then tape wall strength is solid
@gonova84123 ай бұрын
Can you use the hilti collared screws with the SuperDrive n7?
@matheusoliveira60303 ай бұрын
A minha parou de funcionar a mudança de modos de parafusagem, sabe algo a respeito? Obrigado
@shawsan689 Жыл бұрын
What about this pistol? Are 620 and 630 common? Is it a model?
@oliverbiss2747 Жыл бұрын
U tried it with the attachment yet
@apolinariobr Жыл бұрын
Can't find this attachment. Can you send a link? Thanks
@garybuckley3168 Жыл бұрын
I think that you need a few more screws.
@puddin9549 Жыл бұрын
Damn son I don't think she's going anywhere maybe move to another piece 😂
@dawidjakubina2257 Жыл бұрын
What brand it's attachments Thanks
@cristianduarte2311 Жыл бұрын
Is there alot of work down there where your from bro
@jackcruz20069 ай бұрын
What attachment? Pls send the link
@krackNsmackk5 ай бұрын
Where can i get the superdrive n7
@skylark49016 ай бұрын
I hung drywall for 12 years when I was younger close to 30 years ago, no cordless tools, no collated screws, you guys are spoiled! 😆Just kidding, I have 6, 12 foot sheets I have to hang in my house and I may just buy one of these guns just because I want to see how things could have been! I will not be buying the collated screw attachment though, we were very fast without that and they didn't exist anyway, I am curious what the price difference is though between a box of screws, I think the box we would buy was like a 30 pound box, and the equivalent of the collated screws, I'm guessing it would be very sizable. Happy new year!
@csdrywallhawaii
5 ай бұрын
Thanks brother sounds like a blast hahaha glad everything is cordless now.
@skylark4901
5 ай бұрын
@@csdrywallhawaii Ha, BTW, I did buy the newest one, haven't used it yet but already love it anyway! Good luck!
@TheBigBowy5 ай бұрын
Does anyone know if this setup can use 2" deck screws for plywood sheathing and such? If so, what brand of collated screws are compatible? Thanks!
@csdrywallhawaii
5 ай бұрын
Yup the Grabber screws or any corallated Phillips.
@Sgten012 ай бұрын
In new zealand they still only selling the old gun. I been waiting and hoping but kinda need one now. Would u still buy the old one?
@csdrywallhawaii
2 ай бұрын
If there's no better option than yes.
@zack-2423 Жыл бұрын
Well for 1 you ain't gonna be using reverse with the automatic feeder
@danijelkadic79295 ай бұрын
best ?
@mdbd774825 күн бұрын
The old one is better more long to put your hand
@jiujiu65876 ай бұрын
DCF630
@fleezuschrist4712 Жыл бұрын
Hey brother , I have some questions about spraying level 5 is there a place where I can reach you
@csdrywallhawaii
Жыл бұрын
Reach out on Facebook
@seanwilson34245 ай бұрын
Hi quick question why you you them rockers instead of the Dewalt ones? Are they better?
@csdrywallhawaii
5 ай бұрын
They are a bit smoother when going faster.
@NamelesshunterGaming10 ай бұрын
damn, I was looking for an excuse not to buy it. clicked the wrong video i guess. awesome job btw.
@user-kh7hx5hl5f Жыл бұрын
What is that exact collated attachment for the new DCF630?
@queenofspadz
8 күн бұрын
came here to ask that same question
@lrodecw Жыл бұрын
I heard it works great for subfloors too?
@csdrywallhawaii
Жыл бұрын
Yup
@joserosario3568 Жыл бұрын
what is the model number of that screwgun ?
@csdrywallhawaii
Жыл бұрын
amzn.to/3K8mug2
@nrehberg Жыл бұрын
What are the floors covered with and why?
@csdrywallhawaii
Жыл бұрын
Paper for easier clean up.
@zack-2423 Жыл бұрын
Wow dude shouldn't have showed that high room lmfao the little rascals club house had less cracks in it
@csdrywallhawaii
Жыл бұрын
Haha
@danieldepot4090 Жыл бұрын
Poor mud guy
@Dannys.channel
Жыл бұрын
I saw that but I'm sure it looks great when they're done
@bobos245
11 ай бұрын
Ah after corner bead, all those screws will be way easy to mud.
@JamesofJesus
11 ай бұрын
as a mud guy. in the right place i dont care how many screws. just sunk screws, and sliding it on and keep going. might laugh but thats it
lol they do. What you was looking at that small 2”belly😂
@opticalfiber5602 Жыл бұрын
does dcf630b work with 18v battery?
@csdrywallhawaii
Жыл бұрын
No only the 20v.
@Ehvz539 Жыл бұрын
Does this new model leave the screws flushed or zinc in correctly old one just wouldn't 🤔
@csdrywallhawaii
Жыл бұрын
We haven't had any issues with both models.
@Ehvz539
Жыл бұрын
@@csdrywallhawaii I switched to Makita after first model first model lock button always popped loose but this new one seems different
@johnfisher9969 Жыл бұрын
Are the batteries interchangeable?
@bradleykornele
Жыл бұрын
Both 20v
@johnfisher9969
Жыл бұрын
@@bradleykornele so the old Dewalt 20v work in the new guns?
@bradleykornele
Жыл бұрын
@@johnfisher9969 all 20v dewalt battery interchangeable the powerstack battery is just smaller footprint different battery tech (pouch vs cells) very expensive though
@johnfisher9969
Жыл бұрын
@@bradleykornele thats what I needed to know. Thanks! Time for a new gun and router, ive got like 6 batteries that are still good.
@cr9cm9 Жыл бұрын
I hope he made enough money from this video to cover the back charges from the taper
@csdrywallhawaii
Жыл бұрын
Hahaha we tape all our houses so we can't complain about the hanging.
@RikoRey928 ай бұрын
I feel bad for the trim guy thats gonna have to case those doors, scribing casing SUCKS!! Framers meed to stop doing that 3" off the wall shit, should be at least 4.5"
@csdrywallhawaii
7 ай бұрын
The board and screws were removed after video that's why I did it on the case opening since it was foing to get buried with wood to hide the holes the screws left behind. I won't set up the guys behind me like that. Thanks for watching 🤙🏽
@wongsuwung15148 ай бұрын
gift me,. plisss
@thomasgilliam310410 ай бұрын
Take spray froam fill it in and take a break away knife and cutt it flat sand it smooth then add some 20 min hot mud over the foam down the wall a bit boom gap be gone mfs
Пікірлер: 90
The guy who's got to mud over all those extra screws😂
I like the change of the forward/reverse switch as well.........
amzn.to/3K8mug2 Back in stock order soon they go pretty fast.
That's gonna be you're new favourite looks great!
somebody demoing that corner is going to lose their mind
I'm glad they changed the forward/ reverse switch, I'm always bumping it by accident on the old one. The new one looks so much smaller too, can't wait to try it out. Thanks for the video Memo!
@cornyfehr1094
Жыл бұрын
That's crazy man it's so weird ppl have different taste I'd waaayy rather have a faster forward and reverse switch then the impact switch on a screw gun
@AndrewShafer
Жыл бұрын
@@cornyfehr1094 I can see that, I guess I don't usually use reverse on it. I keep the m12 in a holster in case I have to pull a miss
@cornyfehr1094
Жыл бұрын
@Drew Shafer if you are using the screwgun for drywall u can pop the nose cone off hit reverse and apply a bit of pressure against the missed screw and swiped it left or right either way it will losen up and then u just grip with you're fingers and away u go
@AndrewShafer
Жыл бұрын
@Corny Fehr Yeah, I took off the nose cone in favor of the collated screw attachment. It's a pain to remove, and quicker for me to just switch to the mini impact. We need a stud sensing nose cone to eliminate misses entirely
@tombrown03
10 ай бұрын
I cut the forward/reverse switch off because it was SO annoying. With the magazine feed attachment, I never put it in reverse anyway
Good review thank you.
Would have loved a big trigger for forward, and small for reverse instead of having to change the mode. I've used the old Dewalt, and find the switch there to be much easier than to change the direction switch on the Festool which is high up on top of the took
Super helpful. Thank you!
favorite saying in a reno. "taper can fill that" ! 😅
Nice review 👍
I'll bet they did away with the reverse switch cause of to much wear and breaking, and went to thicker button for longer llife. This is a good gun with the N7.
Oh man….do you know how much it costs me when you make these videos?? Lol
The gen 1 is also brushless
Where did you the collated attachment on the Dewalt drywall gun
Whats the end called holding the screws.. what model number is the end. Thanks
They don’t need to worry about the strength of that wall
@csdrywallhawaii
Жыл бұрын
We prefill with hotmud then tape wall strength is solid
Can you use the hilti collared screws with the SuperDrive n7?
A minha parou de funcionar a mudança de modos de parafusagem, sabe algo a respeito? Obrigado
What about this pistol? Are 620 and 630 common? Is it a model?
U tried it with the attachment yet
Can't find this attachment. Can you send a link? Thanks
I think that you need a few more screws.
Damn son I don't think she's going anywhere maybe move to another piece 😂
What brand it's attachments Thanks
Is there alot of work down there where your from bro
What attachment? Pls send the link
Where can i get the superdrive n7
I hung drywall for 12 years when I was younger close to 30 years ago, no cordless tools, no collated screws, you guys are spoiled! 😆Just kidding, I have 6, 12 foot sheets I have to hang in my house and I may just buy one of these guns just because I want to see how things could have been! I will not be buying the collated screw attachment though, we were very fast without that and they didn't exist anyway, I am curious what the price difference is though between a box of screws, I think the box we would buy was like a 30 pound box, and the equivalent of the collated screws, I'm guessing it would be very sizable. Happy new year!
@csdrywallhawaii
5 ай бұрын
Thanks brother sounds like a blast hahaha glad everything is cordless now.
@skylark4901
5 ай бұрын
@@csdrywallhawaii Ha, BTW, I did buy the newest one, haven't used it yet but already love it anyway! Good luck!
Does anyone know if this setup can use 2" deck screws for plywood sheathing and such? If so, what brand of collated screws are compatible? Thanks!
@csdrywallhawaii
5 ай бұрын
Yup the Grabber screws or any corallated Phillips.
In new zealand they still only selling the old gun. I been waiting and hoping but kinda need one now. Would u still buy the old one?
@csdrywallhawaii
2 ай бұрын
If there's no better option than yes.
Well for 1 you ain't gonna be using reverse with the automatic feeder
best ?
The old one is better more long to put your hand
DCF630
Hey brother , I have some questions about spraying level 5 is there a place where I can reach you
@csdrywallhawaii
Жыл бұрын
Reach out on Facebook
Hi quick question why you you them rockers instead of the Dewalt ones? Are they better?
@csdrywallhawaii
5 ай бұрын
They are a bit smoother when going faster.
damn, I was looking for an excuse not to buy it. clicked the wrong video i guess. awesome job btw.
What is that exact collated attachment for the new DCF630?
@queenofspadz
8 күн бұрын
came here to ask that same question
I heard it works great for subfloors too?
@csdrywallhawaii
Жыл бұрын
Yup
what is the model number of that screwgun ?
@csdrywallhawaii
Жыл бұрын
amzn.to/3K8mug2
What are the floors covered with and why?
@csdrywallhawaii
Жыл бұрын
Paper for easier clean up.
Wow dude shouldn't have showed that high room lmfao the little rascals club house had less cracks in it
@csdrywallhawaii
Жыл бұрын
Haha
Poor mud guy
@Dannys.channel
Жыл бұрын
I saw that but I'm sure it looks great when they're done
@bobos245
11 ай бұрын
Ah after corner bead, all those screws will be way easy to mud.
@JamesofJesus
11 ай бұрын
as a mud guy. in the right place i dont care how many screws. just sunk screws, and sliding it on and keep going. might laugh but thats it
What brand are your collated attachments?
@csdrywallhawaii
Жыл бұрын
N7 super drive by grabber
@gregnixon5770
Жыл бұрын
Thanks for the reply
Do you have a link to the hook ?
@csdrywallhawaii
Жыл бұрын
l.instagram.com/?u=https%3A%2F%2Flinktr.ee%2Fthesidingguy&e=AT02oAOnioguD6KrqIgKTQlXP4-cED55LxgY1BR6Hj-gjLCIy9W6CqKIL9_RjneNrqU9xyI1nqC_yMHvKnWrKYhGlorAEN2OH6fZCA
You guys don’t have 54” drywall out there?
@fosterdavid8490
11 ай бұрын
lol they do. What you was looking at that small 2”belly😂
does dcf630b work with 18v battery?
@csdrywallhawaii
Жыл бұрын
No only the 20v.
Does this new model leave the screws flushed or zinc in correctly old one just wouldn't 🤔
@csdrywallhawaii
Жыл бұрын
We haven't had any issues with both models.
@Ehvz539
Жыл бұрын
@@csdrywallhawaii I switched to Makita after first model first model lock button always popped loose but this new one seems different
Are the batteries interchangeable?
@bradleykornele
Жыл бұрын
Both 20v
@johnfisher9969
Жыл бұрын
@@bradleykornele so the old Dewalt 20v work in the new guns?
@bradleykornele
Жыл бұрын
@@johnfisher9969 all 20v dewalt battery interchangeable the powerstack battery is just smaller footprint different battery tech (pouch vs cells) very expensive though
@johnfisher9969
Жыл бұрын
@@bradleykornele thats what I needed to know. Thanks! Time for a new gun and router, ive got like 6 batteries that are still good.
I hope he made enough money from this video to cover the back charges from the taper
@csdrywallhawaii
Жыл бұрын
Hahaha we tape all our houses so we can't complain about the hanging.
I feel bad for the trim guy thats gonna have to case those doors, scribing casing SUCKS!! Framers meed to stop doing that 3" off the wall shit, should be at least 4.5"
@csdrywallhawaii
7 ай бұрын
The board and screws were removed after video that's why I did it on the case opening since it was foing to get buried with wood to hide the holes the screws left behind. I won't set up the guys behind me like that. Thanks for watching 🤙🏽
gift me,. plisss
Take spray froam fill it in and take a break away knife and cutt it flat sand it smooth then add some 20 min hot mud over the foam down the wall a bit boom gap be gone mfs