For the diyer’s out there, a drywall gun of any kind saves a ton of time and consistently sets the screws at the right depth. It’s a pain in the butt to set screws properly, consistently, with a drill.

I bought one of these and needed some help with details and watching your video gave me the answer I was looking for. Thank you

@ToolReviewZone

2 жыл бұрын

Awesomeness 👊

THANKS FOR THE VIDEO. I'M LEARNING SOMETHING BECAUSE I'M THINKING OF DOING WHAT U DOING IN MY BASEMENT. WITH THAT DeWALT TOOL IS EASIER. THANKS. HAVE A NICE LABOR DAY WEEKEND.

Instead of using a regular Phillips head to drive the screws in you can just buy a drywall setting bit for 5 bucks. Works with any regular screw gun. That said, I did purchase the Dewalt drywall gun only because I wanted the attachment DCF6202 that you didn’t show to run Senco duraspin screws like a drywall machine gun.

I own that same drywall gun. 10/10 would recommend. Picked up a kit with the screw gun, 2- 2ah batteries, charger, soft case and the cordless router for $200 bucks while HD had a sale.

Dcf6201 attachment is amazing for that thing!! Holds the colliated screws and you can just slam em in the sheetrock so fast

Thanks for the video. Since my son graduated from Raken in carpentry, now I know what to get him for X mas. Thank u.

I just got one, I am finishing my garage this spring. It isn't a huge job, but it is my first time hanging dry wall and I plan to use it as experience for eventually finishing my basement. Hoping to get started this weekend, In the fall I had finished insulating and weatherproofing so I would be off to the races with the drywall this year.

I just got one and want to use it to install towel rack and install curtain rods. Looks like this is the perfect tool for that

The biggest problem in DIY basement remodeling is getting the drywall inside your house and down the basement stairs by yourself. I can frame, run electric, modify HVAC, add plumbing, insulate install trim doors and a drop ceiling, build custom cabinets, paint, stain and finish but drywall? Hell no! No way could I get 12-14 foot sheets down the basement by myself. I hired a drywall installation company to install and finish tape. Best decision ever as very affordable in the whole budget. Best tool needed for most work was a laser level as it’s a great third hand that doesn’t complain. Only professionals hired were drywallers and carpet installers.

@ToolReviewZone

3 жыл бұрын

Yeah bro, that's the truth. I only have to more sheets to hang and its ready for mud, but damn does my back and knees hurt now lol

@jeremynguyen2346

2 жыл бұрын

@@ToolReviewZone Hi Clint 👍

@matthewhewitt5613

Жыл бұрын

All of the things you can do alone. I'm wondering did you get anything inspected?

@user-rf3jh5ey7i

2 ай бұрын

There is something called 8 foot dry wall, it’s actually pretty easy to carry the sheets

@heystarfish100

2 ай бұрын

@@user-rf3jh5ey7i Having a crew of dry wallets who can carry two 4x12’ sheets down at the same time sure made the job go much better. 😂

Thanks for the vid, really informative. Gonna grab one hopefully during black friday.

Great tool. I didn’t even know they existed! Great video, thanks.

Thank s for all the info

Thank you for the info and great video, I never noticed you dip. haha.

Thank you for this helpful information. Bought a house that needs a bit of tlc. Fixing popped screws and tried using just a drill. Yikes. Bought myself the DeWalt screw gun and trying to learn how to use it. This video truly helps. Giving me confidence to try it. Going to use it in the garage first just to get the hang of it tho' Thank you for giving this old gal the info she needed!

@ToolReviewZone

Жыл бұрын

That is great Jennifer, and you got this 👊👊👊

loving your work big guy

@ToolReviewZone

3 жыл бұрын

Thanks Adrian!!!!

I got my 20v max DeWalt drywall screwgun free, was picking up scrap metal during citywide cleanup and it was in an old filing cabinet, I also made 170 on all the metal I picked up all over town.

Definitely cool. I actually have a corded version. It’s beastly

@ToolReviewZone

3 жыл бұрын

So happy I found this on sale bro!!!

that drywall screw gun and a drywall lifter from Harbor Freight, combo, easy job every time around.

Oh wow 😂 am sooo inspira, w/ that annual inspection Al talk

Cool tool..... Thanks for the info bro. 👌👌👍

@ToolReviewZone

3 жыл бұрын

Thanks Denny!!!

I might be picking one up to finish my barns i put 2 20 x 24 barns up but left it open were the studs can be seen because I wasn't sure if I wanted to put dry wall up but I might be putting it up now it just looks odd very un finished @ToolReviewZone

great idea.

I've been using a drywall bit for years with a drill and get perfect depth each and every time

Awesome. Learned a lot bud

@ToolReviewZone

2 жыл бұрын

Awesomeness 👊

Great review)

Thank You... Nice job in explaining and showing! You should be teaching shop class!

@ToolReviewZone

5 ай бұрын

Thanks Apetri 👊

LOL great sense of humor!

@ToolReviewZone

3 жыл бұрын

Thanks Crypto!!!!!

I found three of these at the dump and cut the spring in one of them so it wouldn't need to be pushed down so hard.

Oooohhh I got TWO was NOT expecting it 😂😂😂😂😂😂😂

Every brand does the work same way but performance that dewalt delivers is great This comes from someone who does this for almost 20 years

Great video, buen Video

@adanaguilar9778

2 жыл бұрын

I buy One of this Drills today , in a EZ pawn,shop on highway 6 Houston TX, after see u video ,on KZread is completely new, battery and charger for 110 bucks, n i Hope is going to help me, to hang the Drywall on My proyect this Monday,. Going to see how it works. thank bro... Compré uno de estos drilles en un pawn shop del highway 6 en Houston TX, por 110 Varos, I confío en que me ayudará en mí proyecto de poner una tabla Roca, éste lunes, Aver cómo trabaja ésto.gracias hermano

Major point: If you drive that screw even a little too far with a regular screw gun, it will tear the paper coating of the drywall and you have lost your proper attachment of the drywall to your stud. If you're doing a small patch-type thing, your regular screw gun is fine. If you're doing a full room or more, get yourself a drywall screw gun.

Ya buddy, SOLD! Earlier today I watched another video on ‘top 5 drywall guns’ by ‘Tools Advisor’ (due to algorithms I inadvertently cheated on this channel bud lol), and this gun was #1 on the list. So I went over to Amazon and bought it WITH the magazine attachment! Which is awesome because you have a choice of both worlds, with/without the attachment whilst jobbing. Can’t bloody well wait to use it. Right on brother, till next video commentary, WOOOOO!!!

@ToolReviewZone

2 жыл бұрын

Awesome!!!! The attachment will save you tons of time 7018!!!

It seem some one suggest ed as the poormans alternative to try a dimpler as a screw gun ? Thoughts please thank you

How about when you putting the studs on tne rock or wall do I use this Dewalt screwgun?

very impressive. You made my day.

But I've seen some guys on TV that just leave the gun spinning on full and the clutch doesn't spin the screw until it feels the pressure, so they're just zipping those screws in really fast on the fly! Can yours do that too?

They don’t make a bi brush do they? Or a brushed and pulse electromagnetic??? Just curious as I have heard a few ppl now say 100% Brushless and now I’m wondering thinking it would make NO SENSE to use brushes and them trying to keep up

The DCF 630 is coming this year!

So theoretically you could board a fence with one of these bad boys with the collated aattavhment and outdoor deck screws 🤔💡

I'm installing data and hang a lot of J hooks. Could I just run around with one of these and hammer them in faster than my regular impact?

The problem I have is the side to side motion and knocking the screw down and always getting pissedp

I have watched one in motion at one of our houses. Great tool but I just can't justify one in my toolbox.

"This is where one... shine"? * shines (one)

I had this screwgun i ts perfect.

Ive had this screwgun for 4 years using it regularly for drywall installation. It runs better now than it did when i bought it, very reliable tool. I would go through multiple corded screwguns in a year before. Expensive compared to corded guns but worth it in the long run.

@cornyfehr1094

2 жыл бұрын

I have the same dewalt drywall screw gun and Same for me mines been going just a bit over 4 years now I've dropped it I've put thousands of screws in.2 man crew we hang 4000 square feet of drywall a day and the guns still goin strong

Never drywalled anything before but im suddenly compelled to get a screwgun.

You know i can tape n float pretty damn decent but if i ever get a chance to do a shop area like this, i think im gonna go with osb rather than sheetrock

@ToolReviewZone

3 жыл бұрын

Its been a while since I've used mud, but I guess its like riding a bike.. right🤔

@BradsWorkbench

3 жыл бұрын

@@ToolReviewZone no.... no its not lol but im sure by the time ur done you'll be good 🤣😝 just messin with ya bud. Lookin forward to seein her completed

@ToolReviewZone

3 жыл бұрын

Haha. Thanks brother 👊👊👊

Can this Dewalt scregun go throw the rock in my basement? When I'm putting on the studs?

Going to hang 40 sheets at my son's house. The money saved made buying a gun a no brainer. Bought a used gun with 2 batteries and charger on Ebay. Your vid cleared up questions I had. Thanks.

Yo TRZ! I have to respectfully disagree. This gun CAN handle commercial and residential production work. It's the charger that i question. Other than that, everything you've mentioned is spot on. Although you were holding the gun slightly incorrectly, but who's splitting hairs? Thanks, you're a beast, and God bless! 😁👊👍

@ToolReviewZone

3 жыл бұрын

Yeah, definitely a pro tool bro. Also, to be fair... i dud mention you can hold it the other way, I just don't like how it feels lol

Why not just use impact with a drywall bit?

Does anyone know why this gun grinds so much? For some reason every screw it grinds like crazy.

* _revolutions_ per minute

If I was to sum it up then it would be REAL NASS LIKE

@ToolReviewZone

3 жыл бұрын

Hahahaha, hell yeah tooltime!

Holding the screw gun wrong ahaha

While this unit seems to work great driving the screws, in reverse, it doesn’t engage to pull a screw out. What am I doing wrong?

@Davethewall1620

Жыл бұрын

You have to take the cone off to remove screws

Hi, question on this screw gun. I am building a fence and have a large investment in DeWalt batteries. would love to buy a screw gun with collated screws. Would this gun have the power to drive a screw through a 2 x 4 or a 1" redwood picket? Thank you!

@ToolReviewZone

Жыл бұрын

Unfortunately this would not 😪

why not use a dimpler bit?

@acidforblood

Жыл бұрын

Ya, I'm not sure why I'd need this tool if I already have a bunch of impact drivers plus a variety of dimple bits in my house. Is this tool meant for people who don't have impact drivers? I'm scratching my head on this one. Its great there is a dedicated tool for the job, but does everyone need it? I know I want it cus its a great tool but I really don't need it due to the other tools at my disposal.

Gun good with metal studs?

@ToolReviewZone

2 жыл бұрын

Sure is Lori 👊

Hi can I attach my impact drill

@ToolReviewZone

3 жыл бұрын

This will not work with bits. Not powerful enough

Get makita cordless makita is the most unpredictable company🙁😔

@ToolReviewZone

3 жыл бұрын

I had to get this for price alone. Coupass it up bro

@konamanstudio2447

3 жыл бұрын

🍻🍺

I had the new to what screw gun the handle it's too small for your hand

There are bits for that, why buy seperat tool..

Its all about the cone and clutch. Rigid sucks compared to Dewalt in regards to drywall screwguns. Routers are a different story.

@ryanlowry5409

3 жыл бұрын

I pumped millions of properly sunk screws. Makes no sense if you don't do it right

@ryanlowry5409

3 жыл бұрын

I was dealing with 5/8 stuff

Quit dippin brother thanks for the video

Mutch better got sick of the theatrics way better revue

🍻🍺😜

You would not use a drill to install drywall; an impact driver is FAR better. That would be a better comparison/

It so unfair man, why would we still pay for $349 AUD for just the skin only in Australia.

@ToolReviewZone

3 жыл бұрын

Wow, that's crazy

WHAT IS A DRYWALL GUN ?

I love the anual inspirational talk ,hahahahaha lol!!

They’re half off right now

@ToolReviewZone

2 жыл бұрын

Cause they have a ew one on the way 👊

This gun is the absolute worst cordless gun for drywall especially into light gauge metal studs every single screw strips out I bought this gun ran 5 screws then spiked it on the ground and gave it to an apprentice Hilti sd4500 ladies and gentlemen

First I'm a virgin

@ToolReviewZone

3 жыл бұрын

Lol

@KekelMyShekel

3 жыл бұрын

@@ToolReviewZone 50% off what a steal!

@ToolReviewZone

3 жыл бұрын

Yeah HD, i was walking up to the counter and it was setting there next to a dewalt saw with a big tag on it. I snagged that bad boy!!!

Lol they can't! As a drywall guy

Great video however your definitely not a drywall finisher

Watch further. Impact d ass