This might be the push I need to try paint correction on my own as a "weekend warrior." I've always been afraid of the capital investment into starting to do paint correction, especially with all the different pad and liquid combinations out there. Going to give the the AMMO Polishing Line a strong consideration!

As a long time fan and consumer, this is absolutely amazing! So cool! Congrats Larry! Keep raising the bar for all us fellow detailers!

Huge congratulations on the new polishing line!! I'm sure you put tons of work into this! I remember years ago you saying you tried making a polishing line and that it wasn't up to market standards. So impressive what you've been able to build and accomplish over all these year's, Larry. Hope to meet you someday 🙌

@AMMONYCSTUDIO

9 ай бұрын

Thank you so much! This project has taken years to execute the vision Kevin and I had. Very excited to finally share this with everyone.

Congrats, Larry. Big time accomplishment!

Congratulations on your success it’s been very interesting to watch your journey for the last 10 years! Back when it was just a porter cable in a driveway

Congratulations Larry! This looks awesome!

Nice, thank you, and greetings from Costa Rica!

Congratulations on the huge collaboration with *Rupes Italy / Rupes USA* to release an official AMMO+Rupes polishing kit! . . Also, kudos to *"Buff Daddy" Kevin Brown* and his insight. At 1:55 minutes, he raises "PPE" to a new dimension. LOL!!! It was hilarious to see him spread suddenly the car polish (body lotion) on his arms and face. I am looking forward to your using new "exfoliate" polish in the near future.

Man, as much as I love some of the modern day polishes and pads we have today, this is awesome what your doing! Your taking things back to how they used to be! Simple, and logical. I seems like once things started taking off, and more and more companies were coming out with products things got more confusing....and honestly complicated. But back in the back (20yrs ago) when I started, the pads are what really did the correction....there wasnt really a million different polishes to choose from. It was all in the pad you used. Love where your going man!!!

Larry always moving the detailing game forward. Congrats on finally succeeding with the correcting formula, I know in the past you had to wipe the previous products because you weren't happy with them.

@AMMONYCSTUDIO

9 ай бұрын

Thanks 👍

Very interesting and informative. Thank you for doing this.

Cool kit. I have used your products and love them. Thanks for posting the video.

This is amazing. Very happy for you and this launch! Hope to check it out!

You need these kits available when AMMO launches with Stash in Australia! 🤞 Awesome work mate! Congratulations!

A very big congratulations on your new line Larry you are a forerunners your industry always innovating and improving your products

@AMMONYCSTUDIO

8 ай бұрын

Thank you!

Congratulations Larry .. amazing work

Ammo+Rupes makes perfect sense, since they are both about uncompromising excellence.

congrats on the new product range, looks amazing

Congratulations Larry! The excitement in your voice tells us long time fans more then just a cool new product your selling. You truly put your heart and soul into your passion and it shows. Thank you for sharing that passion and wisdom with us. (And developing some pretty sweet products along the way)

This helped clarify a lot of small things that I've been worried about! Thank you Larry and congrats on the line!

Love the system you put together Larry well done..

Thanks Larry

Showcasing your product on a Lamborghini is a total baller move. Nice job! Looks great!

Awesome products. Incredibly results sir! 😮 A new line! Love the spec.

love using ammo products and glad you have a polisher ammo system. It's been my fav product line that allows me to use ammo when I'm overseas at an APO address.

I am amazed. Ordering this weekend!

Back in the day we had ammo "jewelers polish" and green pads

Hard work and dedication paying off. The kit looks stunning and hope it makes it's way to the UK 🤞🏻🤞🏻

Definitely learning more about polishing and detailing with every video

Larry, I've been watching you for as long as I can remember (I still remember the video of you cleaning your wife's Subaru in a driveway) but I just recently got into actually cleaning my own cars. I just bought my first polisher and these products are a game changer for me because it really simplifies the process for someone like me who just wants to be able to clean and polish their own vehicles without too much headache. Thanks for making amazing products and pricing them fairly! I will definitely be giving these pads/compound a try :)

Love this Larry. It'd be nice if there was a cheaper version for people who don't detail much but understand you want the best. happy for you though!

Been watching and enjoying your videos for 10 years. Thanks Larry what a great product. You’re the goat.

@AMMONYCSTUDIO

9 ай бұрын

Truly appreciate the support thank you!

Larry, thank you for this. This past weekend I attempted my first paint correction on my vehicle, and it was before you had released all of this to the public. One of the nice things about your system, is that it's simple. If you go to other detailers, a lot of them will have a million different types of compounds and polishes. I'm not saying that maybe stronger compounds don't have their place, but sometimes there's so much product overlap. It just becomes overwhelming for a novice. Reviewing this video, I realized where I made mistakes, and where I could have improved. I'm already looking forward to the next time I get to do it, but I think I'm going to let my skin sealant do its job for the next couple months before I attempt it. Again, thank you for your holistic approach, and for being so clear.

@AMMONYCSTUDIO

8 ай бұрын

Thanks so much for kind words and glad to hear your first correction went well. Feel free to send me an email if you have any questions for next time.

Congrats on this awesome kit! If I didn't already have your red one (which is really awesome btw), I would totally get this! :)

Can’t wait to try it!

Very Cool!!

Awesome!

@AMMONYCSTUDIO

9 ай бұрын

Thank you! Cheers!

Super cool watching you progress over the years. You've put a lot of hard work [and heart] into it. Can't wait to see if you make a kit down the road for us poors though! 😂 Congrats on the success man!

Any updates on UK stock? Were missing out on all your products!!

So good to see! Please tell me you’re releasing 240volt machines to suit the Aussie market!

Congrats Larry! I've been purchasing AMMO products for about 3 years now and they never disappoint. On a side note, does anyone know what make of detailing cart he has in the video? I'd buy one if they were available.

Your the man Larry

I'M BUYING THAT LHR-21 even though I have the 15. It just looks so sick. 10/10 🧑🏻‍🍳😘

Do you modify to make spacing between the backing plate and shroud with the Rupes 21?

I need this kit!

Congratulations kosilla

Epic

Will you be coming out with a 1” pad as well? I could really use the 1” for my Rupes Nano when I am really in the zone and want to OCD all the small and tight spaces.

I'm super excited for this! I've looked at using all-in-one compound and polish fluids and this is so so much better! One question though: if we use the cutting wool pad, do we need to then switch to the finishing pad with fluid or go straight to final finishing pad pass without fluid? Thanks again Larry!

@AMMONYCSTUDIO

9 ай бұрын

After using Sheer Cutting Pad, in most cases you would finish with the WÄFL + X-Foliate then no liquid for the final pass.

Have you tested the polish on gelcoat yet? If so how were your results?

Recently got the Polisher kit and I Love it! Question, How do I clean the dirt and stuff off the white polisher?id like to keep it clean.

@AMMONYCSTUDIO

6 ай бұрын

Iso or apc

I highly recommend you try polishing by brushing. While it isn't as effective for flat surfaces, it is excellent for tiny details

Put your cap back on! 😂 Would love to try this one day… we shall see

Nice Video Perfect

Will you in the future make an affordable system? I love how the polisher looks and the bag. I just wish it wasn’t so expensive.

is it possible to change the backing plate size from 5 to 6inch and vice versa, or are you just stuck with 6inches ? and also whats the benifit of the 21mm throw over a 15mm throw is there really that much of a difference.. I ask as i am looking at upgrading the machine i have and im very interested in your package. Would love to hear your opinion Larry

Have you considered making the fluid sprayable?

I have a ? I have a 2013 Silverado black never been polished a lot of swirls will this kit work if I was to wet sand first then use ur product

Please!! I need 220V version of this😢

Hey Larry, congratulations on the polishing kit finally out. One detail I am not finding is the operating voltage of the polisher. Is is US-only 110V? or there will be a Euro-style mode for 220V? Or maybe even 12VDC?

@AMMONYCSTUDIO

8 ай бұрын

US only at the moment. Working on making AMMO more available overseas soon. Thanks for watching!

nice! So microfiber pads are no longer needed, correct?

How long would these ammo pads last? In terms of how many times i can reuse it

Would you be willing to explain how you use the test panel to complete the rest of the car? Do you bump up machine speed or pressure when correcting the car? Or do you literally just do exactly what you did for the test panel, just at a larger scale? It seems to me that tree passes per "section" would be a little tedious and time consuming, but maybe this is necessary.

can you do more content on metal polishing?

Larry - can your system be used with a rotary polisher, or only DA?

@AMMONYCSTUDIO

8 ай бұрын

This is optimized for DA

Awesome!! Just want to confirm this is a dual action polisher? For us novices. 🙂

@AMMONYCSTUDIO

9 ай бұрын

Correct

Can the sheer cutting pad and Xfoliate be used as a 1 step on some paints?

@AMMONYCSTUDIO

8 ай бұрын

Depends on the paint finish. You can certainly finish out with a wool pad but some paint's require the finishing pad.

Wait? So it’s just one step? What about holograms, or you don’t get any? I’m a rotary user and haven’t tried BF yet

Oh just as I’m in the market for a polisher 😁 was planning on getting an LHR15, what are there any downsides to getting the 21 instead? I’m just a hobbyist.

@AMMONYCSTUDIO

9 ай бұрын

Hey Kevin Brown introduced me to the 21” years ago. I find the larger throw accomplishes work faster, control and balance is maintained, and with our straight cut pads very precise. Due to this modification, it will not feel much different than a 15. However, we offer the pads in 6, 5, and 3 for everyone. Hope that clarifies!

@Alex_S89

9 ай бұрын

@@AMMONYCSTUDIO Thanks! I’ll be ordering some more supplies soon.

What is the brand of disposable gloves you’re using these days?

😍

Larry , will the polish come in bigger sizes for the pro ?

@AMMONYCSTUDIO

9 ай бұрын

Yes, more updates for bulk sizing will come with ATA 300

@Ecdetails

9 ай бұрын

@@AMMONYCSTUDIO I ordered all of the pads and polish , excited to review it

@orthodox1717

8 ай бұрын

@@Ecdetailslooking forward to the review!

@bbdetailing9123

8 ай бұрын

​@@EcdetailsI was thinking we shoyget you some! Nice

@Ecdetails

8 ай бұрын

@@bbdetailing9123 I ordered all of it but the polisher, review is coming I generally like to do 5-6 cars before I do a video

Congratulations on your products. I've noticed you don't use a panel wipe or ipa.

@AMMONYCSTUDIO

9 ай бұрын

I absolutely do but typically after the entire car is polished. The emollients and lubrication in X-Foliate lend to an easy buff off.

@albertvelez6386

9 ай бұрын

Thank you Larry I'm a fan of your work. Also, I would like to see an episode on maintaining vehicles after a full correction. Enjoy your channel.

Bummer. I just bought one of all your chemicals. Guess I'll have to make another order!!

How do we buy chemicals in gallons ? I own a shop here in Florida

@AMMONYCSTUDIO

9 ай бұрын

Hey will have more news coming on bulk sizing very soon. Thanks for stopping by!

Nice!!!!

And I wish you had 15mm pads and polisher

@AMMONYCSTUDIO

9 ай бұрын

We do. These are offered in 6”, 5”, and 3”

Will this be limited?

@AMMONYCSTUDIO

9 ай бұрын

Here to stay

This is similar to what DIY Detail did.

😊Hi Larry, this is Lancy from ANCEL. I am reaching out to see whether you are interested in reviewing our OBD2 diagnostics scan tool? Looking forward to your reply.

you’re always mentioning the hardness of the paint and how it changes your approach to polishing. How are you able to determine the hardness of the paint?

@miniaturemachinist6098

9 ай бұрын

Harder paints or clear coats are harder to scratch but they also take longer to polish, or you have to use a courser compound before polishing. Soft paints or clear coats are easier to scratch and they are easier to polish. It's something that you learn from experience.

@AMMONYCSTUDIO

9 ай бұрын

kzread.info/dash/bejne/fp96xpuPZdreZag.htmlsi=7jup44rxFxFTO-VB

First!!